MW2 on Eyefinity (3xscreens) need FOV fix..

It caps on 80, so i need a hack / workaround or something.

^^ yup i hope someone makes a bypass for the cap limit

If you can code, have a look at this.
http://www.mpgh.net/forum/279-call-d...g_fov-etc.html

you dont need a fov changer u need to change your aspect ratio, i think its in advanced video or some shit

Open your config file (config_mp.cfg) and find:
seta r_mode
Replace the number in the quotes with the correct resolution for your 3 screen display.
Also look for:
seta r_aspectRatio
Replace the ratio/word in the quotes with the correct aspect ratio which matches your setup (eg. 4:3, 16:9, etc)

I don't see why the default FOV shouldn't be enough but whatever..

The default FOV only goes as wide as 16:9. 3 16:9 monitors would have an aspect ratio of 16:3, or if going by ':9' scale, 48:9.

beacuse my aspect ratio is something like 17:3 or some insane thing.


I fixed this problem on cod4 by chaning the fov to 150, so im assuming the same fix should work on mw2.

Hmm.. you could try to find the FOV with memory editing. I don't know if that would allow you to go higher then 80, but it might.

I read somewhere that WILL work, but i can't figure out exactly how to do it.

im soooo jealous that you have eyefinity!!!