gtx 560

[Delko DJ]

hey guys finally i got a great gpu Inno3D
but i have a 500 wat psu with one 6 pin connector but the card it requires 2 6 pin connectors
in the box it had only 1 6 pin connector
what shoould i do

[[MPGH]iverson954360]

wait so you have 1 six pin already on your rail and you have a six pin adapter that came with the card? Just stick the adapter onto one of the molex pins off your psu and plug it into your card and then plug in the six pin that is already on your psu rail in as well.

Also you should have gotten the 560ti.

[Obscene]

Omg... so confused right now.

OT: Google it?

[Delko DJ]

wait so you have 1 six pin already on your rail and you have a six pin adapter that came with the card? Just stick the adapter onto one of the molex pins off your psu and plug it into your card and then plug in the six pin that is already on your psu rail in as well.

Also you should have gotten the 560ti.

My pc it supports max only 1 six pin but the card it has 2 Pins
but in the box it had only 1 pin

[Rigby]

Buy a new power supply. They are all the same configuration, just need to get the right wattage

[Occidi de Pax]

Get a molex to 6 pin adaptor :|

Should be available at local hardware store :|

[Resaun]

How much amps are on the +12v rail?
Getting a molex to 6pin adapter might work.
Buying a new PSU would work... Thermaltake TR2 Series TR-500P 500W, 575w, 600w, Single +12v Rail or Dual +12v Rail Etc...
If the Video Card isn't getting the recommended Power/Amps via the +12v rail you will get constant rebooting / no booting or constant errors...

[Delko DJ]

fuck yeh i put the gpu in the system
i got also a new psu

[[MPGH]Dave84311]

Get a molex to 6 pin adaptor :|

Should be available at local hardware store :|

This ^

You have to make sure dat your PSU can handle it. Sometimes they are built with one 6 pin connector because that's as much as it should support.

[Delko DJ]

thank you man but i already fix it

This ^

You have to make sure dat your PSU can handle it. Sometimes they are built with one 6 pin connector because that's as much as it should support.

---------- Post added at 03:24 PM ---------- Previous post was at 03:04 PM ----------

shit i have ultra bottleneck with x2 250

---------- Post added at 03:47 PM ---------- Previous post was at 03:24 PM ----------

[InCognito]

thank you man but i already fix it

---------- Post added at 03:24 PM ---------- Previous post was at 03:04 PM ----------

shit i have ultra bottleneck with x2 250

---------- Post added at 03:47 PM ---------- Previous post was at 03:24 PM ----------

Why is your pixel fillrate so low?

[[MPGH]AVGN]

Why is your pixel fillrate so low?

Mine is on the right, the 560 seems so much better but I can play any game no problems, no lag.

[InCognito]

Mine is on the right, the 560 seems so much better but I can play any game no problems, no lag.

Really? I thought the GT 520 was a really low end card.



I don't know why, but my card also has lower pixel rate than normal GTX 570. Might have to do with my 1.1 PCI E slot but I always thought it only lowered bandwidth.

[Rigby]

Yeah the pcie 1.1 bus is slowing you down. Only way to fix that is to get a new mobo (which is pointless) but you should be fine with mid-high graphics. The good thing is you can use i. a new build. Also, pcie 3.0 is eventually going to become the next standard so get the the new stuff (the card is fine, its your mobo's fault basically)

[Delko DJ]

Yeah the pcie 1.1 bus is slowing you down. Only way to fix that is to get a new mobo (which is pointless) but you should be fine with mid-high graphics. The good thing is you can use i. a new build. Also, pcie 3.0 is eventually going to become the next standard so get the the new stuff (the card is fine, its your mobo's fault basically)

the only new thing that i need is a cpu and maybe a ssd
my mobo is asrock n68