😳 part aimbot source

#include "ScanContents.h"



bool TakeScreenshot(std::string WindowToFind, BITMAP &bm, HBITMAP &hbmap, BITMAPINFO &bmi, HDC &hdcShot, HBITMAP &hBitmapOld, HWND &hwnd);
void SetupBitmapInfo(BITMAPINFO &bmi, int bWidth, int bHeight, int bitsPerPixel);
bool CompareColour(RGBQUAD *pPixels, int height, int width, int x, int y);
void ScanBMPHorizontal(ScanContents * scan);
//add after BASIC CONCEPT
bool Aim_BotThr(AimbotThr * aimThr1);

//heres our global mouse XY that remembers where the mouse last was
//-----
MouseCoord CurrentMouseXY(0, 0);

bool CompareColour(RGBQUAD *pPixels, int height, int width, int x, int y)
{
	int p = (height-y-1)*width+x; // upside down
	//int r = (int)pPixels[p].rgbRed;
	//int g = (int)pPixels[p].rgbGreen;
	//int b = (int)pPixels[p].rgbBlue;
	//std::cout << (int)pPixels[p].rgbRed << ", " << (int)pPixels[p].rgbGreen << ", " << (int)pPixels[p].rgbBlue  << std::endl;
	//SetCursorPos(x, y);
	//PINK
	//CSS BLUE
	if((int)pPixels[p].rgbRed < 30 && (int)pPixels[p].rgbGreen < 30 && (int)pPixels[p].rgbBlue > 215)
	//css red
	//if((int)pPixels[p].rgbRed > 215 && (int)pPixels[p].rgbGreen < 30 && (int)pPixels[p].rgbBlue < 30)
	{
		//std::cout << "FOUND PINK" << std::endl;
		//system("PAUSE");
		//std::cout << r << ", " << g << ", " << b  << std::endl;
		//std::cout << "Found color" << std::endl;

		return true;
	}
	//else std::cout << "NOT FOUND PINK" << std::endl;
	if(GetAsyncKeyState(VK_ESCAPE))
	{
		exit(0);
	}
	return false;
}


void ShootBot(int x, int y)
{
	mouse_event(MOUSEEVENTF_LEFTDOWN,x, y,0,0);
	mouse_event(MOUSEEVENTF_LEFTUP,x, y,0,0);
}


//OUR MAIN SCANNER LOOP
void ScanBMPHorizontal(ScanContents * scan)
{
	int startedInScanTime = clock();
	//scan until it reaches the limits/bounds of the game window
	
	//THIS CAN BE DIVIDED BY ANY NUMBER, 5 WAS JUST THE CHOICE THAT FELT RIGHT FOR ME, E.G. DOESNT SCAN TOO MUCH OF THE SCREEN. Lower numbers cover
	//more of the game
	//Just like well do below with the X, here we start scanning at about 1/4 of the screen, this allows us to scan the screen much faster
	//and makes our aimbot much more efficient
	for(int y = (scan->RcWindow.bottom - scan->RcWindow.top)/4;
		y < ((scan->RcWindow.bottom - scan->RcWindow.top)-(scan->RcWindow.bottom - scan->RcWindow.top)/3.5);
		y++)
	//for(scan->Y = scan->StartingY-((int)(scan->RcWindow.bottom - scan->RcWindow.top)/5)/*GET'S THE WINDOW'S HEIGHT/5*/; scan->Y < scan->StartingY + ((int)(scan->RcWindow.bottom - scan->RcWindow.top)/5); scan->Y+=3)
	{
		//SetCursorPos(scan->X, scan->Y);
		//3 because we are checking RGB every time
		//ONLY SCAN about 2-3/4 of the screen, this way scans are much faster and we have much more control over the aimbot
		//WE START X at about 1/4 of the screen and stop at 3/4, this way it can work at any window resolution
		for(int x = (int)((scan->RcWindow.right - scan->RcWindow.left)/4)/*+15*/; 
			x < (int)((scan->RcWindow.right - scan->RcWindow.left)-(scan->RcWindow.right - scan->RcWindow.left)/4);
			x ++)
		{
			//SetCursorPos(scan->X+scan->RcWindow.left, scan->Y+scan->RcWindow.top);
			//Sleep(1);
			//CHECK IF OUR CHOSEN COLOUR = TRUE
			if(CompareColour(scan->PPixels, scan->Bm.bmHeight, scan->Bm.bmWidth, x, y))
			{
				int z = x;
				//the width - itself/2
				while(z < (int)((scan->RcWindow.right - scan->RcWindow.left)-(scan->RcWindow.right - scan->RcWindow.left)/4))
				{
					//comment this after
					//SetCursorPos(z, scan->Y);
					//search until our color is not the same and then DEFINE A CENTER POINT from the point found
					//within the for loop(POINT 1 = scan->X to POINT 2 = z (Center  = z - (z - scan->X)/2))
					//the pixel between point 2 and point 1
					if(!CompareColour(scan->PPixels, scan->Bm.bmHeight, scan->Bm.bmWidth, z, y))
					{
						break;
					}
					z++; //COULD ALSO BE 3, 2 is used because i am looking for the exact center point of the first and last pixel
				}
				//MouseCoord coord((z -( z - scan->X)/2)+scan->RcWindow.left means position CURSOR ON CENTER PIXEL(BETWEEN 1st and last), scan->Y+scan->RcWindow.top);
				//4 IS A PERSONAL CHOICE, THIS MEANS AIM 4 pixels below where the top found pixel is
				//that is usually the head, so i prefer to give a shot square in the face 
				//as the normal shot may skim the top of the head and miss
				//this way there could be problems with the array, but not with our design
				SetCursorPos((z -( z - x)/2)+scan->RcWindow.left, (y+4)+scan->RcWindow.top);
				//Sleep(85);
				
				//SmoothMouseMovement((z -( z - x)/2)+scan->RcWindow.left, y+scan->RcWindow.top);
				//system("pause");
				//SHOOT AT THE EXACT CENTER POINT of the color 

				//ADD AFTER BASIC CONCEPT
				//GET OUR CURRENT MOUSE POSITION AND COMPARE TO PREVIOUS
				POINT currentPos; 
				GetCursorPos(&currentPos);
				//~ more or less in the same place as the last position therefor we shoot
				//this tells us that the mouse didnt have to move much and is VERY CLOSE to
				//our target, this stops us from shooting during aiming. Forcing us to conserve
				//ammo and increasing accuracy 60% of the time works every time
				//+ X is just a personal choice, this means if its within X pixels of the last scan then shoot
				//just checking if the mouse is within a nice range
				//2 IS A GOOD NUMBER FOR SNIPERS

				//if(currentPos.x < CurrentMouseXY.X + 4 && currentPos.x > CurrentMouseXY.X-4 && 
				//	currentPos.y < CurrentMouseXY.Y + 4 && currentPos.y > CurrentMouseXY.Y-4)
				//{
					//ShootBot((z -( z - x)/2)+scan->RcWindow.left, y+scan->RcWindow.top);
				//}

				CurrentMouseXY.X = currentPos.x;
				CurrentMouseXY.Y = currentPos.y;
				//std::cout << "Bang bang "  << std::endl;
				//*scan->ColorFoundK = true;
				return;
			}
		}
	}
	std::cout << "out of CLOCK, took " << clock() - startedInScanTime << " milliseconds" << std::endl;
}


bool Aim_BotThr(AimbotThr * aimThr1)