How to use D3D hack.How to use D3D hack. Tutorial.
Many people don't understand how to use the hack so i will try to help.
1. You must have the hack.
2. Extract the .dll file to desktop(anywhere will do actually)(turn off antivirus if needed)
3. Make sure you have an Injector. (If you don't have, go and find one in this forum that works for you. )
4.Run your injector as administrator
5. Put BlackShot(.exe, if required) in process.
6. Select Auto Inject and close after inject.
7. Select your .dll file(whereever you extracted)
8.Run your blackshot launcher as administrator( Garena Plus may work)
9. Log in
10. Start your blackshot
11. Your injector should close( Some will tell you successful) ( If no close, means fail to inject)
12. Now wait until Character Selection screen
13. Press END to show menu if its not already there
14. Use arrow up down to choose section
15. Use Arrow right to open section ( Use arrow left to close)
16. Likewise, Arrow right to on the option(EG. green cham) arrow left to off.
17. IMPORTANT!! After you finish Choosing your options, press END to close menu( IF YOU DON'T, YOUR SCREEN WILL BE ALL BLACK AND HARD TO SEE)
18. Now choose your character and enter.
19. ( If you somehow forget step 17, esc to get back to character selection)
20. Enjoy the hack.
Credits @davian000 for hack file.
---------- Post added at 04:42 PM ---------- Previous post was at 04:37 PM ----------
If anyone is faced with msvrc.dll problem or other .dll errors, it can be fixed by downloading this file : http://www.mpgh.net/forum/168-blacks...dont-have.html Credits to @hackwtf | refer to this post by davian : http://www.mpgh.net/forum/168-blacks...dll-paste.html for further info
1. You must have the hack.
2. Extract the .dll file to desktop(anywhere will do actually)(turn off antivirus if needed)
3. Make sure you have an Injector. (If you don't have, go and find one in this forum that works for you. )
4.Run your injector as administrator
5. Put BlackShot(.exe, if required) in process.
6. Select Auto Inject and close after inject.
7. Select your .dll file(whereever you extracted)
8.Run your blackshot launcher as administrator( Garena Plus may work)
9. Log in
10. Start your blackshot
11. Your injector should close( Some will tell you successful) ( If no close, means fail to inject)
12. Now wait until Character Selection screen
13. Press END to show menu if its not already there
14. Use arrow up down to choose section
15. Use Arrow right to open section ( Use arrow left to close)
16. Likewise, Arrow right to on the option(EG. green cham) arrow left to off.
17. IMPORTANT!! After you finish Choosing your options, press END to close menu( IF YOU DON'T, YOUR SCREEN WILL BE ALL BLACK AND HARD TO SEE)
18. Now choose your character and enter.
19. ( If you somehow forget step 17, esc to get back to character selection)
20. Enjoy the hack.
Credits @davian000 for hack file.
---------- Post added at 04:42 PM ---------- Previous post was at 04:37 PM ----------
If anyone is faced with msvrc.dll problem or other .dll errors, it can be fixed by downloading this file : http://www.mpgh.net/forum/168-blacks...dont-have.html Credits to @hackwtf | refer to this post by davian : http://www.mpgh.net/forum/168-blacks...dll-paste.html for further info
Originally Posted by xyolord98
