M416 Norecoil all attachments *forever undetect*
M416 Norecoil all attachments *forever undetect*
For the BLOODY V- or R- series of mouse by A4Tech. Not work with any other series.
Must have Core3 activated
Core3 crack: MPGH thread on general hacking
M416 Norecoil with attachments
Kobra or RDS
A combination of: Heavy Barrel, Sound Suppressor, Foregrip.
Decided not to release the AN94 1200rpm since it's too lethal, but anyways files are marked with attachments index, you can bind this to "3" or "N" key as you wish.
To get the macro working, you must follow my setup.
Video to showcase effectiveness
Recommend short bursts
FAQ
-Cannot make with lower/higher sensitivity
-DPi does not affect, but recommend 3200DPi
-This is undetectable by PunkBuster (not software based)
-You can use without the Bloody3 software running as long as the macros are loaded
-Must use Core3 activated (no exceptions)
-Resolution of your screen is not important
Scans:
M416-Yellow13.rar - Jotti's malware scan
https://www.virustotal.com/en/file/0...is/1375012373/
0 detected
@AgenBlaze
Must have Core3 activated
Core3 crack: MPGH thread on general hacking
M416 Norecoil with attachments
Kobra or RDS
A combination of: Heavy Barrel, Sound Suppressor, Foregrip.
Decided not to release the AN94 1200rpm since it's too lethal, but anyways files are marked with attachments index, you can bind this to "3" or "N" key as you wish.
To get the macro working, you must follow my setup.
Setup directions
Video to showcase effectiveness
Recommend short bursts
FAQ
-Cannot make with lower/higher sensitivity
-DPi does not affect, but recommend 3200DPi
-This is undetectable by PunkBuster (not software based)
-You can use without the Bloody3 software running as long as the macros are loaded
-Must use Core3 activated (no exceptions)
-Resolution of your screen is not important
Scans:
M416-Yellow13.rar - Jotti's malware scan
https://www.virustotal.com/en/file/0...is/1375012373/
0 detected
@AgenBlaze
Did you updated your hack?
Thought it was *FOREVER UNDETECT*?
Thought it was *FOREVER UNDETECT*?
Originally Posted by TheFlyingDutchman'
Did you updated your hack?
Thought it was *FOREVER UNDETECT*?
Thought it was *FOREVER UNDETECT*?
This one: M416
Lrn2read
yay 
Will use this when I get the mouse
Will use this when I get the mouse
Looks good to me.
/Approved
/Approved
So basically it's a macro that drags the mouse down to prevent recoil? Not sure how this werkz. 
Thanks!! Very nice.
P.S Guy's emm a4tech v7 blood mouse can buy only from a4tech website-shop?
P.S Guy's emm a4tech v7 blood mouse can buy only from a4tech website-shop?
Originally Posted by HaloGunner977th
So basically it's a macro that drags the mouse down to prevent recoil? Not sure how this werkz.
Originally Posted by whitex13
Thanks!! Very nice.
P.S Guy's emm a4tech v7 blood mouse can buy only from a4tech website-shop?
P.S Guy's emm a4tech v7 blood mouse can buy only from a4tech website-shop?
All version V-x or R-x works with this macro script.
Ok thank's 
you sure its forever Undetected ?
Originally Posted by EL Surenzo dA KK Caponeiyl
you sure its forever Undetected ?
Originally Posted by Uninstalled
Thanks for posting this, but two things:
Anyway you could also provide a macro without ANY attachments? This helps out the new guys who don't have shit for that gun yet. Also, if you're willing to take the time it'd be cool if you could put out a proper tutorial on how to make these macros with the Bloody4 software. I've been trying to figure it out myself, but the manual is extremely vague due to the poor translation to English.
Once again, thanks for this Yellow.
EDIT: IMPORTANT - I noticed that if I have the Bloody4 software running then after a certain amount of time Punkbuster kicks me for (0) minutes for "illegal" program/drivers. This however isn't a problem because anyone with the mouse knows that you can save the macros on the mouse and close the software at which point Punkbuster doesn't kick me but I am still able to of course use the macros.
Just thought I'd give a heads up, not sure if anyone else is has noticed this.
Anyway you could also provide a macro without ANY attachments? This helps out the new guys who don't have shit for that gun yet. Also, if you're willing to take the time it'd be cool if you could put out a proper tutorial on how to make these macros with the Bloody4 software. I've been trying to figure it out myself, but the manual is extremely vague due to the poor translation to English.
Once again, thanks for this Yellow.
EDIT: IMPORTANT - I noticed that if I have the Bloody4 software running then after a certain amount of time Punkbuster kicks me for (0) minutes for "illegal" program/drivers. This however isn't a problem because anyone with the mouse knows that you can save the macros on the mouse and close the software at which point Punkbuster doesn't kick me but I am still able to of course use the macros.
Just thought I'd give a heads up, not sure if anyone else is has noticed this.
2. I didn't use the manual at all, although the Chinese one is written better
3. Correct, you don't need Bloody4 running to use the macros if you have already "saved" the macro to the mouse
Originally Posted by Yellow 13
Your sig.
Thanks for posting this, but two things:
Anyway you could also provide a macro without ANY attachments? This helps out the new guys who don't have shit for that gun yet. Also, if you're willing to take the time it'd be cool if you could put out a proper tutorial on how to make these macros with the Bloody4 software. I've been trying to figure it out myself, but the manual is extremely vague due to the poor translation to English.
Once again, thanks for this Yellow.
EDIT: IMPORTANT - I noticed that if I have the Bloody4 software running then after a certain amount of time Punkbuster kicks me for (0) minutes for "illegal" program/drivers. This however isn't a problem because anyone with the mouse knows that you can save the macros on the mouse and close the software at which point Punkbuster doesn't kick me but I am still able to of course use the macros.
Just thought I'd give a heads up, not sure if anyone else is has noticed this.
Anyway you could also provide a macro without ANY attachments? This helps out the new guys who don't have shit for that gun yet. Also, if you're willing to take the time it'd be cool if you could put out a proper tutorial on how to make these macros with the Bloody4 software. I've been trying to figure it out myself, but the manual is extremely vague due to the poor translation to English.
Once again, thanks for this Yellow.
EDIT: IMPORTANT - I noticed that if I have the Bloody4 software running then after a certain amount of time Punkbuster kicks me for (0) minutes for "illegal" program/drivers. This however isn't a problem because anyone with the mouse knows that you can save the macros on the mouse and close the software at which point Punkbuster doesn't kick me but I am still able to of course use the macros.
Just thought I'd give a heads up, not sure if anyone else is has noticed this.
I noticed you're using C-Machine mostly though, are you just individually going through each value until you get no recoil? Also - how are you determining the rate of fire in m/s?
Wow clean, good job.
This thread is closed for replies.
