[AdventureQuest Trainer] AEDab 2.2
[AdventureQuest Trainer] AEDab 2.2
The goal of this trainer is to make up for the faulty features in AQ Elite, ideally the Auto-Battler which I have yet to even start to attempt to work on since I dislike flash. Spidernumbers told me the Variable to set for access for the admin menu swf which is also apparently useful to cheating on AQ.
So as it is with my Multiple Variable Setter, here is the admin menu. Whenever the spider guy makes a auto-battler I'll add it as well. If you want to edit any character stats or change your name there is SWFs preloaded in the Data folder that the Trainer can load. Be warned you may need to reset your Variables / SWFs if you use more than 5 Movie layers.
Basic Features
~Auto SWF URL finder (grabs from AQ Site)
~Load Custom SWFs
~ Admin Menu
~ Multiple Variable Set (So you can do certain things, IE: freeze enemy)
Virus Scan: https://www.virustotal.com/en/file/9...is/1445320301/
@Black
Originally Posted by saiyatan
This can let you enter multiple variables at once, and there is no unusable / outdated variables or features.
The problem was a message box.
@Black guy
merge with OP
Originally Posted by illegalcheez
"https://aq.battleon.com/Build30/game.asp?launchtype=medium"
The only thing I can think of is the game base being incorrect for you somehow due to your regions. DoesAqElite use a smaller window? I can try to change it and see if that works, else I'm able to use this just fine on two separate PCs so I'm really going to need something to work with here because I have no idea what the problem can be.
I've also disabled ads, so that's not the problem either.
- - - Updated - - -
Does the 1.0 version work? tell me that.
I've gone over everything and there is no possible way this issue should be happening. If I remember right the not allowing network scripting causes this but it's allowed.
That option is how to prevent your error, however I guess since I didn't re-register the shockwaveflash it might have caused this option to become invalid somehow. So I've made sure to use shockwaveflash in the COM references so it should work.
@Black
---------------------------------------------------------------------------
Update
AE has updated their website, the build no longer has /engine/ in it's url, and the access level for Admin.swf has changed, I'm not sure what it is or if the swf it self needs to be modified as well. I can't redownload/reuse Sothink on my computer I'll have to reset.
https://www.virustotal.com/#/file/3f...6983/detection
https://virusscan.jotti.org/en-US/fi...job/zgt8h9r6pl
https://www.virustotal.com/#/file/3f...6983/detection
https://virusscan.jotti.org/en-US/fi...job/w02yv7tck3
Update: Warning, you can be potentially banned for fighting absurdly high level monsters and saving your gold/XP. I highly recommend not being lvl1 and beating a lvl144.
So as it is with my Multiple Variable Setter, here is the admin menu. Whenever the spider guy makes a auto-battler I'll add it as well. If you want to edit any character stats or change your name there is SWFs preloaded in the Data folder that the Trainer can load. Be warned you may need to reset your Variables / SWFs if you use more than 5 Movie layers.
Basic Features
~Auto SWF URL finder (grabs from AQ Site)
~Load Custom SWFs
~ Admin Menu
~ Multiple Variable Set (So you can do certain things, IE: freeze enemy)
Code:
_level0.intMonsterFrozen 10 _level0.func.FreezeMonster 10
@Black
Originally Posted by saiyatan
What is the different between this and AQelite?
I think this is was they talked about
I think this is was they talked about
The problem was a message box.
@Black guy
Originally Posted by illegalcheez
Getting the exact same problem as evilminh99. "Welcome! Undefined", "Game Configuration Error" and "Processing Error: Undefined." AqElite works on my end, as does the regular site.
The only thing I can think of is the game base being incorrect for you somehow due to your regions. DoesAqElite use a smaller window? I can try to change it and see if that works, else I'm able to use this just fine on two separate PCs so I'm really going to need something to work with here because I have no idea what the problem can be.
I've also disabled ads, so that's not the problem either.
- - - Updated - - -
Does the 1.0 version work? tell me that.
I've gone over everything and there is no possible way this issue should be happening. If I remember right the not allowing network scripting causes this but it's allowed.
That option is how to prevent your error, however I guess since I didn't re-register the shockwaveflash it might have caused this option to become invalid somehow. So I've made sure to use shockwaveflash in the COM references so it should work.
@Black
---------------------------------------------------------------------------
Update
AE has updated their website, the build no longer has /engine/ in it's url, and the access level for Admin.swf has changed, I'm not sure what it is or if the swf it self needs to be modified as well. I can't redownload/reuse Sothink on my computer I'll have to reset.
https://www.virustotal.com/#/file/3f...6983/detection
https://virusscan.jotti.org/en-US/fi...job/zgt8h9r6pl
https://www.virustotal.com/#/file/3f...6983/detection
https://virusscan.jotti.org/en-US/fi...job/w02yv7tck3
Update: Warning, you can be potentially banned for fighting absurdly high level monsters and saving your gold/XP. I highly recommend not being lvl1 and beating a lvl144.
Will take a look when I get home 
Approved. Sorry for the delay.
Hello, first i would like to thank you for your dedication.
When i try to log in it keeps saying there's a "game configuration error", how could i fix this?
Thanks
When i try to log in it keeps saying there's a "game configuration error", how could i fix this?
Thanks
Originally Posted by dfelipebrom
Hello, first i would like to thank you for your dedication.
When i try to log in it keeps saying there's a "game configuration error", how could i fix this?
Thanks
When i try to log in it keeps saying there's a "game configuration error", how could i fix this?
Thanks
Thanks for the release! It's been a long time since I've played Adventure Quest
game configuration error.
When logging in it gives that error + it says Processing Error, undefined.
Tysm for the effort!!
When logging in it gives that error + it says Processing Error, undefined.
Tysm for the effort!!
Breaks upon startup. I am not able to do anything. Ty for your contribution at least :/
Originally Posted by Backtalkas
Breaks upon startup. I am not able to do anything. Ty for your contribution at least :/
So, 3 or so people replied with the same problem who register on October 2015 with one post. I need some kind of proof or pictures here so I can see if the SWF catcher is catching or whats going on because it works fine for me and my computers. Did you all not extract one or both of the .dll files? Is there perhaps a country problem with the website that gets redirect when connecting to that changes the data of where the SWF might be at so my isolation and 'grabbing' of that .swf? If that's the case I need a picture to confirm the .SWF is not being catched meaning it doesn't show up in the textbox.
In which case you can just manually go to AQ site and view source then find the .swf version and enter it in the textbox and reload the Flash.
not sure if this is troll or legit.
What is the different between this and AQelite?
I think this is was they talked about
I think this is was they talked about
Edited OP.
Yeah, having the same problems
Originally Posted by evilminh99
Yeah, having the same problems
Not sure, can you elaborate on how you are producing this error?
Since it doesn't seem to me manually alerting you after 5 SWF layers you could crash your swf GameClient which in theory I suppose should produce this error... So that is what I'm assuming is happening, you are loading too many SWFs without exiting them. I remember that causing problems before.
This happens when I try to login immediately after opening, without opening and swfs, I even tried clicking "Stop variables/swf" after opening the trainer, still seems to get the undefined login screen.
Originally Posted by evilminh99
This happens when I try to login immediately after opening, without opening and swfs, I even tried clicking "Stop variables/swf" after opening the trainer, still seems to get the undefined login screen.
