Merge Glitch Command Plugin for Grimoire 3.8

[gaffox]

This plugin will alow you to do the merge glitch with an automatic log out, or with commands so that you can make a bot that uses the merge glitch if you want to merge a item multiple times.

How to load the plugin:
Just put the plugin inside the plugins folder of Grimoire, if after doing that Grimoire won't open go to the plugin file right click it, go into Properties/General and on the bottom right check/click the unblock option and apply the changes.

How to use it:

Direct way
1) Go to the tab named direct inside the plugin window.
2) Select if you are going to use it for merging or for a quest.
3) Add the delay that works for you with the glitch.
4) Check the do only once if you want it to stop automatically after doing the glitch one time.
5) Click the start button.
6) Go to the map where the merge shop is located if you are using it for merge.
7) Merge the item you want/Turn in a quest and you will get disconnected after the delay that you selected.
8) Repeat 6 and 7 then click the stop button after you did it all the times you needed.


Command way
1) Make a join command to the map where the merge shop is located if you are using it for merge.
2) Go to the tab named command inside the plugin window.
3) Select if you are going to use it for merging or for a quest.
4) Add the ID of the shop where the item is bought/ or the ID of the quest.
5) Add the name of the item you want to merge if you are using it for merge.
6) Add the delay that works for you with the glitch.
7) Then click the add command button.
8) Remember to check the Auto Relogin option in grimoire if you want the bot to keep going.


To be able to use the Merge Glitch you require to have the items necessary to normally merge the item, because how the glitch works is that you need to disconnect after getting the item, but before yours materials are taken, allowing you to get the item you wanted without wasting the materials.


The delay I use is 400ms, yours might be different so I recommend you to go and try using it with a cheap merge item first (For ex: the Dark Flaming Legion Skull which costs only 1 Legion Token), starting with a low ms, and increasing it 20ms by 20ms so you know what delay works for you.
Take into account that the delay required for the merge and quest glitch might be different.


Remember to only use the plugin with quests that:
1)Don't require temporal items.
2)Don't require you to grab the reward.
As you will get disconnected, so use it with quests that send the reward directly to your inventory, or that rewards lots of xp/rep/gold, like Malorie's Quests for rep and Juggernaut Items of Nulgath for gold.
Also if you don't see the quest being accepted while using the plugin that is perfectly normal, as it is not actually necessary to do it to complete a quest, so take that in mind while using it.

No you can't use it for roentgenium or void auras, you need to accept the drop.


Also don't try to use it for the quest "Open Treasure Chests!", it won't work.









https://www.virustotal.com/#/file/b5...cc3f/detection
https://virusscan.jotti.org/en-US/fi...job/2ypc4rq2f8

[Dab]

File approved

[Jipseey]

Important to note that you need the required amount of items for this to work, example: if the item you are glitching requires 400 legion tokens, you must have 400 legion tokens in your inventory, etc. Nonetheless, thanks for making a grimoire version for this glitch!

[Mysterious_Stranger]

Uh, not working for me?

[gaffox]

Uh, not working for me?

Maybe you are not using Grimoire 3.8, Biney changed some of the code for 3.8 so this plugin will only work with that version.
Will test it with another PC and tell you.

Edit:

Just tested it in my other pc that didn't have anything from grimoire installed and it opened without problem, make sure you are using the Grimoire 3.8 version that is a sticky on this forum.

[aRxBoMbUs]

Uh, not working for me?

It works for me. You should try to set the time to be higher. I did like 350 ms but you can probably go all the way up to 500 ms or even higher. It all depends on your internet speed. Try to test it on smaller items that don't need much to merge first

[Mysterious_Stranger]

Maybe you are not using Grimoire 3.8, Biney changed some of the code for 3.8 so this plugin will only work with that version.
Will test it with another PC and tell you.

Edit:

Just tested it in my other pc that didn't have anything from grimoire installed and it opened without problem, make sure you are using the Grimoire 3.8 version that is a sticky on this forum.

Ok thanks, i'll try to get the latest version. Btw that error message occured when I'm using Grimoire 3.8

It works for me. You should try to set the time to be higher. I did like 350 ms but you can probably go all the way up to 500 ms or even higher. It all depends on your internet speed. Try to test it on smaller items that don't need much to merge first

Bruh, i was talking about the Plugin loading failure. Not the actual merge glitch timing

[KekkeTex]

Uh, not working for me?

I had the error as well. You have to download the latest grimoire 3.8 that says it's made on March 26th

---

After updating it works fine for me. Maxed out the super-fan tokens I was first too lazy to even glitch



I used this as bot:

Is in inventory: Super-Fan Swag Token, 100
Stop bot
Join: collection-1e6, Enter, Spawn
Delay: 1000
Merge Glitch, Super-Fan Swag Token A, 325, 400
Delay: 3000

[gaffox]

Important to note that you need the required amount of items for this to work, example: if the item you are glitching requires 400 legion tokens, you must have 400 legion tokens in your inventory, etc. Nonetheless, thanks for making a grimoire version for this glitch!

I Will add an explanation of how the Merge Glitch works to the main post in case someone doesn't know .

I had the error as well. You have to download the latest grimoire 3.8 that says it's made on March 26th

Thanks for the note I will add it to the main post, thought the reason was something like that, thanks for clearing it out .

[DontMesswitMe]

I had the error as well. You have to download the latest grimoire 3.8 that says it's made on March 26th

---

After updating it works fine for me. Maxed out the super-fan tokens I was first too lazy to even glitch



I used this as bot:

Is in inventory: Super-Fan Swag Token, 100
Stop bot
Join: collection-1e6, Enter, Spawn
Delay: 1000
Merge Glitch, Super-Fan Swag Token A, 325, 400
Delay: 3000

I've seen a lot of people post their codes for bots. Sorry for asking, this question might be obvious, but how do you put this code into your commands?

[KekkeTex]

I've seen a lot of people post their codes for bots. Sorry for asking, this question might be obvious, but how do you put this code into your commands?

Sorry, you have to manually input these commands. This is just how it wil look like to give a general idea. Since the bot is so small it isn't really worth to upload since you would have to wait for approval anyway. If you know how to use the commands, it's easy to make it.

Otherwise, open some text editor like notepad, and copy paste the code from the spoiler. Save as a .gbot file, and use that one.
But keep in mind that most likely you'll have to change the delay time of the merge glitch.

 

{
  "$type": "Grimoire.Botting.Configuration, Grimoire",
  "Commands": {
    "$type": "System.Collections.Generic.List`1[[Grimoire.Botting.IBotCommand, Grimoire]], mscorlib",
    "$values": [
      {
        "$type": "Grimoire.Botting.Commands.Map.CmdJoin, Grimoire",
        "Map": "collection-1e6",
        "Cell": "Enter",
        "Pad": "Spawn"
      },
      {
        "$type": "Grimoire.Botting.Commands.Misc.Statements.CmdInInventory, Grimoire",
        "Tag": "Item",
        "Text": "Is in inventory",
        "Value1": "Super-Fan Swag Token A",
        "Value2": "100"
      },
      {
        "$type": "Grimoire.Botting.Commands.Misc.CmdStop, Grimoire"
      },
      {
        "$type": "Grimoire.Botting.Commands.Misc.CmdDelay, Grimoire",
        "Delay": 1000
      },
      {
        "$type": "Follower_Plugin.MergeGlitch+CmdMergeGlitch, Merge_Glitch",
        "ItemName": "Super-Fan Swag Token A",
        "ShopID": 325,
        "Delay": 400
      },
      {
        "$type": "Grimoire.Botting.Commands.Misc.CmdDelay, Grimoire",
        "Delay": 3000
      }
    ]
  },
  "Skills": {
    "$type": "System.Collections.Generic.List`1[[Grimoire.Game.Data.Skill, Grimoire]], mscorlib",
    "$values": []
  },
  "Quests": {
    "$type": "System.Collections.Generic.List`1[[Grimoire.Game.Data.Quest, Grimoire]], mscorlib",
    "$values": []
  },
  "Author": "Author",
  "Description": "Description",
  "Boosts": {
    "$type": "System.Collections.Generic.List`1[[Grimoire.Game.Data.InventoryItem, Grimoire]], mscorlib",
    "$values": []
  },
  "Drops": {
    "$type": "System.Collections.Generic.List`1[[System.String, mscorlib]], mscorlib",
    "$values": []
  },
  "Server": {
    "$type": "Grimoire.Game.Data.Server, Grimoire",
    "sName": "Twilly",
    "iPort": 11010
  },
  "SkillDelay": 500,
  "ExitCombatBeforeRest": true,
  "ExitCombatBeforeQuest": true,
  "EnablePickup": true,
  "AutoRelogin": true,
  "RelogDelay": 5000,
  "RelogRetryUponFailure": true,
  "BotDelay": 1000,
  "SkipDelayIndexIf": true,
  "WalkSpeed": 8,
  "NotifyUponDrop": {
    "$type": "System.Collections.Generic.List`1[[System.String, mscorlib]], mscorlib",
    "$values": []
  },
  "RestMp": 60,
  "RestHp": 60,
  "RestartUponDeath": true

[Mysterious_Stranger]

I had the error as well. You have to download the latest grimoire 3.8 that says it's made on March 26th

Didn't knew you faced it too, anyway thanks and yeah i downloaded the latest Grimoire just a minutes ago and its working now

Thanks for the note I will add it to the main post, thought the reason was something like that, thanks for clearing it out .

Awesome thread, and yeah that'll definitely make people's much aware now

I've seen a lot of people post their codes for bots. Sorry for asking, this question might be obvious, but how do you put this code into your commands?

Well, without the actual GBOT file there's nothing you can do to "copy" them. But in such case like KekkeTex did, You can only imitate them

[DeanyBox]

Cannot get it to work,

Where can i find the older version of grimoire?

[gaffox]

Cannot get it to work,

Where can i find the older version of grimoire?

What problem are you having?, and you don't need an older version you need the last one that is on this thread https://www.mpgh.net/forum/showthread.php?t=1340281

[DeanyBox]

All fixed now thank you!