[X32.0.2] 059 client

Previous Threads

If you have bad fps with this on flash player 18, try the latest flash player 30, or unplug a playstation controller if you have one connected. The cause has been found but I didn't have the fix ready by the time deca released this update. Non xbox controllers plugged into usb cause mega lag, sorry.

Famebot stuff:
Check the options under Fame options. Explanation of the Fame options:
Distance Threshold: the distance from each player to include in the density calculation (it loops through each player, then loops through each player again and checks which player is under this distance from the outer loop player, if they're under the threshold then it counts)
Offset from Center: how far away from the center (calculated above^), in the direction others are moving
Tele Distance: how far away from the center until you teleport to the center
Fame Point Offset: randomly, your player will walk away from the center in each direction, the distance away from the center is multiplied by this number - this is to prevent multiple people from looking stacked on top of each other if they're botting - INCREASE THIS IF YOU LOOK STACKED ON TOP - ALSO INCREASE IF YOU'RE GETTING STUCK ON ROCKS (1.0 is good)
Walk back to Train legit: makes it so you don't reconnect immediately back to the realm, instead you will walk to the realm portal and wait until it opens
Disclaimer: YOU CAN GET BANNED FOR FAMEBOTTING, BE WARNED! It has happened and it can happen to you. I added randomization to avoid detection, but it's not a guarantee. The way you get banned is by other people recording you and spending the time to figure out who is botting and who isn't.

To set a new fame train realm portal type /fameportal, otherwise just turn famebot on and walk to a portal to set it the first time.

Changes (last) build:
- Fixed nexus news/seasonal UI alignment

Features

- Login to Steam or Kongregate accounts - the Secret on the login menu is for these types of accounts, if you paste in the secret like what muledump uses, it will login to your Steam/Kongregate account and you can play normally
- Custom sound effects - white bag drop notifier, dungeon dinger for when people open keys, private message notification
- A lot of performance optimizations, this client should run a lot smoother than normal and also use less memory
- Custom Stats Monitor shows ping too (taking suggestions as for where to put this, it currently covers up rank in the top left), shows FPS, LATency, and MEMory usage
- Fame options to avoid losing fame bonuses
- Debuff ignoring like normal, except ignoring server debuffs (in red) shows you how many you've ignored - threshold is at 25, it will stop blocking them after so you don't dc from the server
- Auto Ability has been completely seperated from Auto Aim, they are independent of each other
- Loot preview showing item icons over bags
- Auto Responder for Thessal/Cem/Sewers (no Lod for now)
- Has custom timers for boss phases, if you click on it it says the timer in chat so be careful, you can set your own timer with /timer 120 for 2 minutes or /timer 2:00, also some of the marble colossus phases are wrong - if you have proper phases (chat message that the boss says and the number of seconds the phase lasts) enter them here and I'll include it, this goes for any boss
- Number of enemies left in dungeon, during events, is not shown in chat but is displayed on the screen below the timer area
- Reverse cultist staff and make etherite shoot straight and fix colossus sword.
- List keys in player's inventories
- Typing /realm <name> will keep joining a random realm until you get into that realm, so type /realm cyc for Cyclops
- Vault Only mode, check it on the main menu to make it so you never join Nexus, ever
- Low CPU mode hotkey, disables a LOT of stuff, including enemy shots and aoe bombs
- Questbar, shows quest hp, could use some improvement
- Show damage dealt to enemy under their sprite
- Good autonexus, with seal heals and everything, it should only very rarely desync, no guarantees as usual, it is possible to die with it and it has happened, avoid playing in laggy servers. There's a hotkey to manually reset HP and an option to automatically reset if it gets too far off.
- Teleport to self, useful for anything where you need 1 second of invulnerability, great for parasite den and other shit
- Auto claim daily login
- Language strings and all sounds are embedded in the client to reduce bandwidth, but at the cost of making the client an extra ~4 mb

Commands

/aig <#> - add enemy to ignore list
/alpha <#> - sets transparency level, 0.5 is default
/an - show autonexus percent
/an <#> - set autonexus percent, type /an 20 for 20% autonexus
/ah - show autoheal percent
/ah <#> - set autoheal percent, type /ah 20 for 20% autoheal
/ap - show auto hp pot percent
/ap <#> - set auto hp pot percent, type /ap 20 for 20% auto hp potion
/am - show auto mp pot percent
/am <#> - set auto mp pot percent, type /am 20 for 20% auto mp potion
/ao - make other players transparent
/bg - toggle rendering map backgrounds (sprite stars and nexus blue perlin noise island things)
/bgfps <#> - set background fps
/con <server name> - connect to server (/con usw, /con aus, etc)
/conn - same as above if you have replace /con in options
/constructs - toggles ignoring of all constructs
/copy - take the appearance of someone else
/cstat - toggle showing ClientStat packets, removed the option from Visual
/fake <name> - spawn a fake object at your location
/fgfps <#> - set foreground fps
/follow <name> or /f <name> - follows a name, type /follow or /f to stop
/fpm - shows current fame per minute
/fpmclear - resets fpm
/fps <#> - sets your fps
/fs - toggle fullscreen
/gkick - kicks someone from your guild
/gmake - creates a guild
/goto - join server ip
/gquit - quits guild
/grank <name> <rank> - changes the rank of your guild member
/gwho - sends /tell mreyeball mates
/hidepets and /pets - hides pets
/igdefault - reset ignore list to default
/ip - current server ip
/keys - show players with keys
/keylist - toggle the keylist
/l - show coordinates but shorter
/left - potions left to max (one of two things stolen from crazyclient, this and showing your roll when you level)
/loc - show coordinates
/lockfilter or /lf - hide nonlocked players
/lid or /lootindefault - reset autoloot inclusion list to default
/lil or /lootinlist - list all items in the inclusion list
/lia or /lootinadd <itemid> - add item to inclusion list
/lir or /lootinrem <itemid> - rem item to exclusion list
/led or /lootexdefault - reset autoloot exclusion list to default
/lel or /lootexlist - list all items in the exclusion list
/lea or /lootexadd <itemid> - add item to exclusion list
/ler or /lootexrem <itemid> - rem item from exclusion list
/moveload - load recording from text file
/moveplay - playback recording
/moverec - record your movement
/movesave - save recording to text file
/movestop - stop recording
/msc or /mscale - fullscreen's map scaling
/mserver - sends /tell mreyeball server
/mystic - reveals mystics in train
/nt - go to nexus tutorial
/private - sends /tell mreyeball private profile
/rig <#> - remove enemy from ignore list
/s - swap all items in inventory and backpack
/sbthreshold <#> - set spellbomb autoaim threshold (also in options)
/scui or /scaleui - toggle fullscreen's uiscale
/setmsg1 <message> - sets a message to be saved, can be resent with the Custom Message 1 hotkey in Options under World
/setmsg2 <message> - sets a message to be saved, can be resent with the Custom Message 2 hotkey in Options under World
/setmsg3 <message> - sets a message to be saved, can be resent with the Custom Message 3 hotkey in Options under World
/setmsg4 <message> - sets a message to be saved, can be resent with the Custom Message 4 hotkey in Options under World
/sfadd - add word to spam filter
/sfclear - clear spam filter
/sfdefault - reset spam filter to default
/sflist - list spam filter words
/skulltargets <#> - set skull autoaim minimum target amount
/skullthrehsold <#> - set skull autoaim threshold (also in options)
/sound <name> - play a custom sound or in game sound
/stack
/suicide - disables autonexus and makes all shots spawn on you
/timer <seconds> or /timer <minutes:seconds> - set a custom timer, like /timer 5:04 will set it to 5 minutes and 4 seconds
/tooltip <item> command - Typing /tooltip Demon Blade will show a tooltip of a dblade, for debugging purposes
/tut - go to tutorial
/uitextsize <#> command - change text size of custom timers/keylist
/vault - toggle vault only mode
/world - show world #
/vol <#> - set volume level

Todo/Not Finished/Broken

Working on automatic pathing, and automatic dungeon joining - made progress
FPS lag - unplug your PS4 controller if you have one... need to get around to fixing this
Option to refresh charlist on main menu
Make /con or /conn switch characters
Right click to withdraw/deposit vault items

Screenshot:

Virus Scans:
https://www.virustotal.com/gui/file/...459c/detection
https://virusscan.jotti.org/en-US/fi...job/98ul5z4540

[X32.0.2]059client_mpgh.net.zip32.9 MB · 1,203 downloads Clean

Download & Thanks

//Approved

Originally Posted by bigdaddyowo

We already missed 2 days of the tomb event, jesus christ.

Go make your own client???

Says too many login attemps

Thank you for making the client @059 I love you for updating the client every time!
Thank you Joe for approving the client with short notice!

I can't swap from best server, what can i do?

Is there a reason I can't swap servers?

- - - Updated - - -

UsEast is dead rn, huh.

Thanks man! u are the best and the only one

Get well 059, also thanks @Joe.

For others having issues with swapping from best server on event it's because there's different asset connections that has been changed, for a quick fix yourself I'll guide you step by step since 059 is feeling bad right now, I've been working with the client myself and updating it myself but since he released one I don't need to make a thread, for now. (All credit goes to him of course).

However here's a quick fix for not being able to swap from (BEST SERVER):

Step 1: Download & Thanks @059 SWF file from this thread.
Step 2: Download JPEXS Flash Editor, it's free and you won't hassle with licenses etc. Simply google then type JPEXS, it's your first link, and it will bring you directly to the download website.
Step 3: After you downloaded and installed JPEXS, go ahead and launch it, then open up the SWF file from the interface button on the upper left corner that says OPEN with a folder icon.
Step 4: After the client is done opening, you will notice a set of folders to your left, locate "Scripts" which is the last folder, double click it to open it in a drop down fashion or click simply the "+".
Now open the kabam>rotmg>servers>api.
Step 5: When you've reached the api folder and opened it, you will see 3 different AS3 Scripts (Action 3 Scripts) Don't worry about the technicality of these for now, simply click on "Server".

Now in the middle there should be a text field that shows the script, don't worry if you know nothing about scripting this isn't an issue, simply just locate the line that says:

Code:

      public var isAdminOnly:Boolean;
      
      public function Server()
      {

Notice the "public function server()"
Then below it there's bunch of text that describes servers and so on, what you want to do is:

Step 6: If you look down of the text field where the script is, there should be an interactive button that says: "Edit Actionscript (Exprimental)", click on that and click OK for any future dialog that appears.

Now simply mark the text from

Code:

public function Server()

to

Code:

         super();
      }

, which should be at the end of where the servers are listed. And it should look like this:

Code:

      public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

Now that you have all that marked, simply copy and paste this code, and replace that one with:

Code:

           public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["proxy"] = "Proxy";
         serverAbbreviations["caus"] = "CAustralia";
         serverAbbreviations["case"] = "CAsiaSouthEast";
         serverAbbreviations["cusw"] = "CUSWest";
         serverAbbreviations["cusmw"] = "CUSMidWest";
         serverAbbreviations["ceuw"] = "CEUWest";
         serverAbbreviations["ceue"] = "CEUEast";
         serverAbbreviations["cuss"] = "CUSSouth";
         serverAbbreviations["cuse"] = "CUSEast";
         serverAbbreviations["ceun"] = "CEUNorth";
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

If you are new to scripting or text editing etc, make sure you follow these steps closely and do not mess up what you should mark and replace.

Step 7: After you are done replacing by copy+paste, click save and OK on any future dialog that appears (The save button should appear right beside where the Edit Actionscript was).

Now that you are successfully done, congratulations, you've changed a script by your own! Now let's export the client as an SWF.

Navigate to your upper left corner where it says "Save as..." a bit to the right of "Open" the folder we begun with, simply click it, then choose a name for your SWF (I recommend not overwriting 059's client, make a new name, so you can have that one as a backup), and you're done! Open the new client connect to the game (Doesn't matter what server you connect to), simply enter Nexus on best server.

Now this is where you will use the command ingame called

Code:

/con

To connect to different servers all you need to do is type /con "serverabbrevation" in the chat.

For EXAMPLE: If you want to connect to CEUWest you'd type /con ceuw in the chat, click enter and it should connect you instantly, if you want to connect to CUSEast, simple again

Code:

/con cuse

Here's the list of abbrevations for their each and their own servers:

Code:

                  caus = "CAustralia";
         case = "CAsiaSouthEast";
         cusw = "CUSWest";
         cusmw = "CUSMidWest";
         ceuw = "CEUWest";
         ceue = "CEUEast";
         cuss = "CUSSouth";
         cuse = "CUSEast";
         ceun = "CEUNorth";

Enjoy and have fun

Thank you guys!

Thanks helped me alot

- - - Updated - - -

Originally Posted by xunknownhostx

Get well 059, also thanks @Joe.

For others having issues with swapping from best server on event it's because there's different asset connections that has been changed, for a quick fix yourself I'll guide you step by step since 059 is feeling bad right now, I've been working with the client myself and updating it myself but since he released one I don't need to make a thread, for now. (All credit goes to him of course).

However here's a quick fix for not being able to swap from (BEST SERVER):

Step 1: Download & Thanks @059 SWF file from this thread.
Step 2: Download JPEXS Flash Editor, it's free and you won't hassle with licenses etc. Simply google then type JPEXS, it's your first link, and it will bring you directly to the download website.
Step 3: After you downloaded and installed JPEXS, go ahead and launch it, then open up the SWF file from the interface button on the upper left corner that says OPEN with a folder icon.
Step 4: After the client is done opening, you will notice a set of folders to your left, locate "Scripts" which is the last folder, double click it to open it in a drop down fashion or click simply the "+".
Now open the kabam>rotmg>servers>api.
Step 5: When you've reached the api folder and opened it, you will see 3 different AS3 Scripts (Action 3 Scripts) Don't worry about the technicality of these for now, simply click on "Server".

Now in the middle there should be a text field that shows the script, don't worry if you know nothing about scripting this isn't an issue, simply just locate the line that says:

Code:

      public var isAdminOnly:Boolean;
      
      public function Server()
      {

Notice the "public function server()"
Then below it there's bunch of text that describes servers and so on, what you want to do is:

Step 6: If you look down of the text field where the script is, there should be an interactive button that says: "Edit Actionscript (Exprimental)", click on that and click OK for any future dialog that appears.

Now simply mark the text from

Code:

public function Server()

to

Code:

         super();
      }

, which should be at the end of where the servers are listed. And it should look like this:

Code:

      public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

Now that you have all that marked, simply copy and paste this code, and replace that one with:

Code:

      public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["proxy"] = "Proxy";
         serverAbbreviations["cusw"] = "CUSWest";
         serverAbbreviations["cusmw"] = "CUSMidWest";
         serverAbbreviations["ceuw"] = "CEUWest";
         serverAbbreviations["ceue"] = "CEUEast";
         serverAbbreviations["cuss"] = "CUSSouth";
         serverAbbreviations["cuse"] = "CUSEast";
         serverAbbreviations["ceun"] = "CEUNorth";
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

If you are new to scripting or text editing etc, make sure you follow these steps closely and do not mess up what you should mark and replace.

Step 7: After you are done replacing by copy+paste, click save and OK on any future dialog that appears (The save button should appear right beside where the Edit Actionscript was).

Now that you are successfully done, congratulations, you've changed a script by your own! Now let's export the client as an SWF.

Navigate to your upper left corner where it says "Save as..." a bit to the right of "Open" the folder we begun with, simply click it, then choose a name for your SWF (I recommend not overwriting 059's client, make a new name, so you can have that one as a backup), and you're done! Open the new client connect to the game (Doesn't matter what server you connect to), simply enter Nexus on best server.

Now this is where you will use the command ingame called

Code:

/con

To connect to different servers all you need to do is type /con "serverabbrevation" in the chat.

For EXAMPLE: If you want to connect to CEUWest you'd type /con ceuw in the chat, click enter and it should connect you instantly, if you want to connect to CUSEast, simple again

Code:

/con cuse

Here's the list of abbrevations for their each and their own servers:

Code:

         cusw = "CUSWest";
         cusmw = "CUSMidWest";
         ceuw = "CEUWest";
         ceue = "CEUEast";
         cuss = "CUSSouth";
         cuse = "CUSEast";
         ceun = "CEUNorth";

Enjoy and have fun

THanks Helped me alot...

pretty sure u forgot ASE and AUS, but its not that hard to add if u understand the code

Originally Posted by thisisnotme6969

pretty sure u forgot ASE and AUS, but its not that hard to add if u understand the code

No didn't forget them, but they're pretty useless and pointless to add, because they're unpopulated in the event and made no sense to add them

Edit:

Anywho, for those who wants these servers:

Code:

      public function Server()
      {
         serverAbbreviations = [];
         serverAbbreviations["proxy"] = "Proxy";
         serverAbbreviations["caus"] = "CAustralia";
         serverAbbreviations["case"] = "CAsiaSouthEast";
         serverAbbreviations["cusw"] = "CUSWest";
         serverAbbreviations["cusmw"] = "CUSMidWest";
         serverAbbreviations["ceuw"] = "CEUWest";
         serverAbbreviations["ceue"] = "CEUEast";
         serverAbbreviations["cuss"] = "CUSSouth";
         serverAbbreviations["cuse"] = "CUSEast";
         serverAbbreviations["ceun"] = "CEUNorth";
         serverAbbreviations["usw3"] = "USWest3";
         serverAbbreviations["usw2"] = "USWest2";
         serverAbbreviations["usw"] = "USWest";
         serverAbbreviations["ussw"] = "USSouthWest";
         serverAbbreviations["uss3"] = "USSouth3";
         serverAbbreviations["uss2"] = "USSouth2";
         serverAbbreviations["uss"] = "USSouth";
         serverAbbreviations["usnw"] = "USNorthWest";
         serverAbbreviations["usmw2"] = "USMidWest2";
         serverAbbreviations["usmw"] = "USMidWest";
         serverAbbreviations["use3"] = "USEast3";
         serverAbbreviations["use2"] = "USEast2";
         serverAbbreviations["use"] = "USEast";
         serverAbbreviations["euw2"] = "EUWest2";
         serverAbbreviations["euw"] = "EUWest";
         serverAbbreviations["eusw"] = "EUSouthWest";
         serverAbbreviations["eus"] = "EUSouth";
         serverAbbreviations["eun2"] = "EUNorth2";
         serverAbbreviations["eun"] = "EUNorth";
         serverAbbreviations["eue"] = "EUEast";
         serverAbbreviations["ase"] = "AsiaSouthEast";
         serverAbbreviations["ae"] = "AsiaEast";
         serverAbbreviations["aus"] = "Australia";
         serverAbbreviations["au"] = "Australia";
         super();
      }

Server abbreviations:

Code:

         caus = "CAustralia";
         case = "CAsiaSouthEast";
         cusw = "CUSWest";
         cusmw = "CUSMidWest";
         ceuw = "CEUWest";
         ceue = "CEUEast";
         cuss = "CUSSouth";
         cuse = "CUSEast";
         ceun = "CEUNorth";

Note: If you have map hack enabled on rift, you'll get stuck at the start or Oryx's castle. Map hack doesn't work on rift in general.

thank you for sharing

Outdated[X32.0.2] 059 client

Similar Threads

Tags for this Thread