1. Launch the hex editor.
2. In the hex editor: File -> Open -> go to the following path
...steamapps\common\Dead by Daylight\DeadByDaylight\Content\Paks.
3. Choose the following file:
pakchunk0-WindowsNoEditor.
4. In the hex editor press the keyboard shortcuts
Ctrl + F, the search window will open.
5. In the "
Text-string" tab in the "
Search for" field, enter the word:
BP_ZanshinTactics. Also, in the "
Search direction" panel, select the "
All" checkbox and press OK button.
6. After finding this string line, scroll down a bit and find the following string line:
GameplayModifierType.RevealBreakableWallsInRange
7. Highlight the following string line:
RevealBreakableWallsInRange
As you can see, in
hexadecimal (the panel on the left), this string line starts at
byte 52 and ends at
byte 65.
8. Place the cursor on
byte 52 and overwrite all values with
zeros, up to
65 byte. It should look like the screenshot:
9. In the "
Decoded text" panel (the panel on the right), place the cursor on the
red dot, that is, after the following letters: "
difierType."(so that byte
00 is highlighted on the left, after byte 2E) as in the screenshot:
10. Now copy this text –
RevealAllSurvivorsInRange and mouse right click on the place where you had the cursor positioned in the hex editor and select "
Paste write".
You should have something like this:
Now in the hex editor: File -> Save. When saving, a window will pop up about creating a backup copy of the file, you can undo this action.