(Release)Maxus Minimax
(Release)Maxus Minimax
Maxus Minimax 9.6.1
- gather stuff while fighting
- flight mode added
- works on XP/Vist/Win7 32 and 64 bit ...
- Fight on spot is back
- works best fully setup!!
- MemWriting used for flying mode...
System Requirements:
Win XP / Vista / Win7 in Admin mode
How does the bot work:
While running to the next WP the bot is Tabbing to seek for a valid
target... once found:
it gets in distance > Buffs up > Precast > Battle Sequence loop until the mob is dead (emergency checks) ...
it will autom. loot > agro check > Postcast HP > Postcast MP > REGenerateHP/MP? > moves to next WP
FAQ:
- The bot ONLY READS from memory
- The bot only works with Aion Client in Focus (no background mode )
- Make sure to ENABLE auto approach target in Option
- Use standard Keyboard setup in Aion (movement keys and mousewheel click)
- At first Start input a Botname on Misc layer , Keysetname on Basic layer
- Make sure you are near 50m of a Waypoint for "Runbot" and near a Ghostpoint for "Go to camp"
- Most of the input files have tooltips if you hover over with the mouse! (input sec, min etc?)
- Use WP/GP recorder or set points manual with Keypad + and - key (set points every 5-10m)$
- For Instant cast time input like 600-1000ms
- The bot only fights mobs above lvl3
- After manual edit of the battle sequence (ini file) don’t forget to save it and refresh the list in bot
- Fighting on spot fixed (you can even Setup GPs to a Camp with 0 Wps
- If you play on a Private Server you need to load the right offsets for that version (1.5.1.4 to 1.5.1.7 incl. )
- Bot will attack targets within your Max distance set +20m (36m is max distance you can target a mob with tab )
- Set your max range to your pulling distance ( voke like 13m , mage abilities up to 23m )
- Combo input box -> set how many times you want to spam the same button
- check tooltips if you need to input values in min. , sec. or millisecond.
- Casttime = Time THE BOT should wait until he moves to the next attack in line
- Cooldown = Time that needs to pass until the bot will do this attack again
- As you see timer have not much to do with the in game timers ( Bot-timer >= in game timer )
Samples for Setup with a mage (sorc.):
CT = Time to wait until next Attack
CD = How often do you want the bot to cast it (for me 35sec = once per fight / depends on mob lvl etc)
Precast: Ice Chain combo to Frozen Shock
Ice Chain Casttime 2sec , Cooldown 10sec
Frozen Shock CT 0 sec , CD 30sec
Now if you count the sec how long it takes after finishing casting
and the Combo item starts blinking in your attack bar.. thats about
1 sec for this combo..
Now put this together...
-> CT: 2200 ( 2000ms would be enough but see below **)
-> CD: 10 ( 10sec for CD of first spell .. use 30 for only full chain)
-> Combo: 2 (After casting it needs 1sec for combo to be read)
( 2 x 1/4 Casttime of 2200 are about that 1 sec... so input 2 ... )
(** I took 2200 instead of 2000 for smoother combos)
---------------------------------------------------------------------------------
Attack1: Stoneskin CT: Instant CD: 2min
Buff Last: 5min or 600damage (600 dmg is first so spam every 2min)
-> CT: 800 (Instant = 800 casttime ... always !! )
-> CD: 121 ( 121 sec = ca. 2 min ... )
-> Comb: x (No Combo used ... X it out )
-> Max: (Ticked Max cause I want to use stoneskin far away..)
---------------------------------------------------------------------------------
Attack2: Delayed Blast CT: 2sec CD: 30sec
-> CT: 2000
-> CD: 40 ( 40 cause I don’t kill the mob within 30sec.. but nvm)
-> Max: (ticked cause it’s a ranged spell)
---------------------------------------------------------------------------------
Attack3: Robe of Flame CT: 0sec CD: 10sec Last: 30min
-> CT: 800 (cause its instant...)
-> CD: 1800 ( input 30min in sec as buff duration)
---------------------------------------------------------------------------------
Attack4: Flame Harpoon CT: 2sec CD: 6sec
-> CT: 2000
-> CD: 6
---------------------------------------------------------------------------------
Attack5: Flame Bolt CT: 2sec CD: 1sec Combo !!
-> CT: 2200 ( a bit more to tune smoother combo)
-> CD: 6 (if you take the real 1 sec it will only spam Atck5..
take 6 like lowest in serie)
-> Combo: 4 (Equals a double combo... higher value longer combo)
---------------------------------------------------------------------------------
Virus scan: Virustotal. MD5: e29a686329daabe3962a308f6a4d31e7 Suspicious.Insight Suspicious file
Credits: Maxus and some other geeks.
- gather stuff while fighting
- flight mode added
- works on XP/Vist/Win7 32 and 64 bit ...
- Fight on spot is back
- works best fully setup!!
- MemWriting used for flying mode...
System Requirements:
Win XP / Vista / Win7 in Admin mode
How does the bot work:
While running to the next WP the bot is Tabbing to seek for a valid
target... once found:
it gets in distance > Buffs up > Precast > Battle Sequence loop until the mob is dead (emergency checks) ...
it will autom. loot > agro check > Postcast HP > Postcast MP > REGenerateHP/MP? > moves to next WP
FAQ:
- The bot ONLY READS from memory
- The bot only works with Aion Client in Focus (no background mode )
- Make sure to ENABLE auto approach target in Option
- Use standard Keyboard setup in Aion (movement keys and mousewheel click)
- At first Start input a Botname on Misc layer , Keysetname on Basic layer
- Make sure you are near 50m of a Waypoint for "Runbot" and near a Ghostpoint for "Go to camp"
- Most of the input files have tooltips if you hover over with the mouse! (input sec, min etc?)
- Use WP/GP recorder or set points manual with Keypad + and - key (set points every 5-10m)$
- For Instant cast time input like 600-1000ms
- The bot only fights mobs above lvl3
- After manual edit of the battle sequence (ini file) don’t forget to save it and refresh the list in bot
- Fighting on spot fixed (you can even Setup GPs to a Camp with 0 Wps
- If you play on a Private Server you need to load the right offsets for that version (1.5.1.4 to 1.5.1.7 incl. )
- Bot will attack targets within your Max distance set +20m (36m is max distance you can target a mob with tab )
- Set your max range to your pulling distance ( voke like 13m , mage abilities up to 23m )
- Combo input box -> set how many times you want to spam the same button
- check tooltips if you need to input values in min. , sec. or millisecond.
- Casttime = Time THE BOT should wait until he moves to the next attack in line
- Cooldown = Time that needs to pass until the bot will do this attack again
- As you see timer have not much to do with the in game timers ( Bot-timer >= in game timer )
Samples for Setup with a mage (sorc.):
CT = Time to wait until next Attack
CD = How often do you want the bot to cast it (for me 35sec = once per fight / depends on mob lvl etc)
Precast: Ice Chain combo to Frozen Shock
Ice Chain Casttime 2sec , Cooldown 10sec
Frozen Shock CT 0 sec , CD 30sec
Now if you count the sec how long it takes after finishing casting
and the Combo item starts blinking in your attack bar.. thats about
1 sec for this combo..
Now put this together...
-> CT: 2200 ( 2000ms would be enough but see below **)
-> CD: 10 ( 10sec for CD of first spell .. use 30 for only full chain)
-> Combo: 2 (After casting it needs 1sec for combo to be read)
( 2 x 1/4 Casttime of 2200 are about that 1 sec... so input 2 ... )
(** I took 2200 instead of 2000 for smoother combos)
---------------------------------------------------------------------------------
Attack1: Stoneskin CT: Instant CD: 2min
Buff Last: 5min or 600damage (600 dmg is first so spam every 2min)
-> CT: 800 (Instant = 800 casttime ... always !! )
-> CD: 121 ( 121 sec = ca. 2 min ... )
-> Comb: x (No Combo used ... X it out )
-> Max: (Ticked Max cause I want to use stoneskin far away..)
---------------------------------------------------------------------------------
Attack2: Delayed Blast CT: 2sec CD: 30sec
-> CT: 2000
-> CD: 40 ( 40 cause I don’t kill the mob within 30sec.. but nvm)
-> Max: (ticked cause it’s a ranged spell)
---------------------------------------------------------------------------------
Attack3: Robe of Flame CT: 0sec CD: 10sec Last: 30min
-> CT: 800 (cause its instant...)
-> CD: 1800 ( input 30min in sec as buff duration)
---------------------------------------------------------------------------------
Attack4: Flame Harpoon CT: 2sec CD: 6sec
-> CT: 2000
-> CD: 6
---------------------------------------------------------------------------------
Attack5: Flame Bolt CT: 2sec CD: 1sec Combo !!
-> CT: 2200 ( a bit more to tune smoother combo)
-> CD: 6 (if you take the real 1 sec it will only spam Atck5..
take 6 like lowest in serie)
-> Combo: 4 (Equals a double combo... higher value longer combo)
---------------------------------------------------------------------------------
Virus scan: Virustotal. MD5: e29a686329daabe3962a308f6a4d31e7 Suspicious.Insight Suspicious file
Credits: Maxus and some other geeks.
thx , mate
is this still working?
This thread is closed for replies.