MPGHThe Dark Arts
RegisterLog in

PostDetectedRust Logitech Anti-Recoil

Posts 1–15 of 78 · Page 1 of 6
Rust Logitech Anti-Recoil
Please be careful when using this.

Code:
sleep_duration = 32.5 --Play Around With This To Match Your Sensitivity (Default is 32.5)
MaxBreak = 50
TimeStamp = -MaxBreak-1	-- it's negative 2 seconds
sens=0.7 -- This is your in game sens. USE 800 DPI (You might have to fine tune it by using decimal points like 0.35 or 1.05 and stuff)
recoilbutton=4 --Changes the button of your ak recoil/recoil mode (Default is 4)
m249button=7 --Changes the button for your m249 mode (Default is 7)
scopebutton=8 --Changes the button for your scope mode (Default is 8)
semiautobutton=9 --Changes the button for your semiauto mode (Default is 9)
 
 
ak_recoil_coordsx = {
{ x = 0, y = 0 },   ---1
{ x = 0, y = 0 },
{ x = 0, y = 0 },
{ x = 0, y = 0 },
 
{ x = 0, y = 0 },   ---2
{ x = 0, y = 0 },
{ x = 0, y = 0 },
{ x = 0, y = 0 },
 
{ x = -1.665, y = 0 }, ---3
{ x = -1.665, y = 0 }, 
{ x = -1.665, y = 0 },
{ x = -1.665, y = 0 },
 
{ x = -3.33, y = 0 }, ---4
{ x = -3.33, y = 0 },
{ x = -3.33, y = 0 },
{ x = -3.33, y = 0 }, 
 
{ x = -3.33, y = 0 }, ---5
{ x = -3.33, y = 0 },
{ x = -3.33, y = 0 },
{ x = -3.33, y = 0 },
 
{ x = -4.1625, y = 0 }, ---6
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
 
{ x = 3.33, y = 0 },  ---7
{ x = 3.33, y = 0 },
{ x = 3.33, y = 0 },
{ x = 3.33, y = 0 },
 
{ x = 4.995, y = 0 },  ---8
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 },
 
{ x = 4.995, y = 0 },  ---9
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 }, 
 
{ x = 4.1625, y = 0 }, ---10
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = 4.1625, y = 0 }, ---11
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = 4.1625, y = 0 }, ---12
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = 4.1625, y = 0 }, ---13
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = 4.1625, y = 0 }, ---14
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = -4.995, y = 0 }, ---15
{ x = -4.995, y = 0 },
{ x = -4.995, y = 0 },
{ x = -4.995, y = 0 },
 
{ x = -4.995, y = 0 }, ---16
{ x = -4.995, y = 0 },
{ x = -4.995, y = 0 },
{ x = -4.995, y = 0 },
 
{ x = -4.995, y = 0 }, ---17
{ x = -4.995, y = 0 },
{ x = -4.995, y = 0 },
{ x = -4.995, y = 0 },
 
{ x = -4.1625, y = 0 },    ---18
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
 
{ x = -4.1625, y = 0 },  ---19
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
 
{ x = -4.1625, y = 0 },  ---20
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
 
{ x = -4.1625, y = 0 }, ---21
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
 
{ x = -4.1625, y = 0 }, ---22
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
 
{ x = -4.1625, y = 0 }, ---23
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
 
{ x = -4.1625, y = 0 }, ---24
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
{ x = -4.1625, y = 0 },
 
{ x = 4.995, y = 0 }, ----25
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 },
 
{ x = 4.995, y = 0 }, ---26
{ x = 4.995, y = 0 }, 
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 },
 
{ x = 4.995, y = 0 }, ---27
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 },
{ x = 4.995, y = 0 },
 
{ x = 4.1625, y = 0 }, ----28
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = 4.1625, y = 0 }, ----29
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = 4.1625, y = 0 }, ----29
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = 4.1625, y = 0 }, ----29
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
{ x = 4.1625, y = 0 }, ----29
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
{ x = 4.1625, y = 0 },
 
}
 
ak_recoil_coordsy = {
{ x = 0, y = 6.66 },   ---1
{ x = 0, y = 6.66 },
{ x = 0, y = 6.66 },
{ x = 0, y = 6.66 },
 
{ x = 0, y = 4.995 },   ---2
{ x = 0, y = 4.995 },
{ x = 0, y = 4.995 },
{ x = 0, y = 4.995 },
 
{ x = 0, y = 4.995 }, ---3
{ x = 0, y = 4.995 }, 
{ x = 0, y = 4.995 },
{ x = 0, y = 4.995 },
 
{ x = 0, y = 4.995 }, ---4
{ x = 0, y = 4.995 },
{ x = 0, y = 4.995 },
{ x = 0, y = 4.995 }, 
 
{ x = 0, y = 2.664 }, ---5
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 }, ---6
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 },  ---7
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 },  ---8
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 },  ---9
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 }, 
 
{ x = 0, y = 2.664 }, ---10
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.8305 }, ---11
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---12
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---13
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---14
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---15
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---16
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---17
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 },    ---18
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 },  ---19
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 },  ---20
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---21
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---22
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---23
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.8305 }, ---24
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
{ x = 0, y = 2.8305 },
 
{ x = 0, y = 2.664 }, ----25
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 }, ---26
{ x = 0, y = 2.664 }, 
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 }, ---27
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 }, ----28
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 }, ----29
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 }, ----29
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 }, ----29
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
{ x = 0, y = 2.664 }, ----29
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
{ x = 0, y = 2.664 },
 
}
 
 
 
 
 
 
scope_ak_recoil_coords = {
{ x = 0, y = 24 },   ---1
{ x = 0, y = 24 },
{ x = 0, y = 24 },
{ x = 0, y = 24 },
 
{ x = -3, y = 21 },   ---2
{ x = -3, y = 21 },
{ x = -3, y = 21 },
{ x = -3, y = 21 },
 
{ x = -3, y = 18 }, ---3
{ x = -6, y = 18 }, 
{ x = -3, y = 18 },
{ x = -6, y = 18 },
 
{ x = -12, y = 18 }, ---4
{ x = -12, y = 18 },
{ x = -12, y = 18 },
{ x = -12, y = 18 }, 
 
{ x = -18, y = 9.6 }, ---5
{ x = -18, y = 9.6 },
{ x = -18, y = 9.6 },
{ x = -18, y = 9.6 },
 
{ x = -15, y = 9.6 }, ---6
{ x = -15, y = 9.6 },
{ x = -15, y = 9.6 },
{ x = -15, y = 9.6 },
 
{ x = 12, y = 9.6 },  ---7
{ x = 12, y = 9.6 },
{ x = 12, y = 9.6 },
{ x = 12, y = 9.6 },
 
{ x = 18, y = 9.6 },  ---8
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 },
 
{ x = 18, y = 9.6 },  ---9
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 }, 
 
{ x = 15, y = 9.6 }, ---3
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
 
{ x = 15, y = 3.2 }, ---11
{ x = 15, y = 3.2 },
{ x = 15, y = 3.2 },
{ x = 15, y = 3.2 },
 
{ x = 15, y = 3.2 }, ---12
{ x = 15, y = 3.2 },
{ x = 15, y = 3.2 },
{ x = 15, y = 3.2 },
 
{ x = 15, y = 3.2 }, ---13
{ x = 15, y = 3.2 },
{ x = 15, y = 3.2 },
{ x = 15, y = 3.2 },
 
{ x = 15, y = 3.2 }, ---14
{ x = 15, y = 3.2 },
{ x = 15, y = 3.2 },
{ x = 15, y = 3.2 },
 
{ x = -18, y = 3.2 }, ---15
{ x = -18, y = 3.2 },
{ x = -18, y = 3.2 },
{ x = -18, y = 3.2 },
 
{ x = -18, y = 3.2 }, ---16
{ x = -18, y = 3.2 },
{ x = -18, y = 3.2 },
{ x = -18, y = 3.2 },
 
{ x = -18, y = 3.2 }, ---17
{ x = -18, y = 3.2 },
{ x = -18, y = 3.2 },
{ x = -18, y = 3.2 },
 
{ x = -15, y = 3.2 },    ---18
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
 
{ x = -15, y = 3.2 },  ---19
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
 
{ x = -15, y = 3.2 },  ---6
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
 
{ x = -15, y = 3.2 }, ---21
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
 
{ x = -15, y = 3.2 }, ---22
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
 
{ x = -15, y = 3.2 }, ---23
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
 
{ x = -15, y = 3.2 }, ---24
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
{ x = -15, y = 3.2 },
 
{ x = 18, y = 9.6 }, ----25
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 },
 
{ x = 18, y = 9.6 }, ---26
{ x = 18, y = 9.6 }, 
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 },
 
{ x = 18, y = 9.6 }, ---27
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 },
{ x = 18, y = 9.6 },
 
{ x = 15, y = 9.6 }, ----28
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
 
{ x = 15, y = 9.6 }, ----29
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
 
{ x = 15, y = 9.6 }, ----29
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
 
{ x = 15, y = 9.6 }, ----29
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
 
{ x = 15, y = 9.6 }, ----29
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
{ x = 15, y = 9.6 },
 
}
 
 
 
 
 
 
 
recoil_count = # ak_recoil_coordsx
LastIndex = 1
function OnEvent(event, arg, family)
    OutputLogMessage("event = %s, arg = %d\n", event, arg)
    if (event == "PROFILE_ACTIVATED") then
        EnablePrimaryMouseButtonEvents(true)
    elseif event == "PROFILE_DEACTIVATED" then
        ReleaseMouseButton(2)  -- to prevent it from being stuck on
    end
    if (event == "MOUSE_BUTTON_PRESSED" and arg == recoilbutton) then
m249=false
scope=false
recoil=false
stand=false
        auto = not auto
        spot = not spot
    end
 
if (event == "MOUSE_BUTTON_PRESSED" and arg == m249button) then --change this for m249 mode
        m249 = not m249
    end
 
if (event == "MOUSE_BUTTON_PRESSED" and arg == scopebutton) then --Change this for the scopemode
        scope = not scope
    end
------------------------------
if (event == "MOUSE_BUTTON_PRESSED" and arg == semiautobutton) then
recoil = not recoil
m249=false
if (recoil == false) then
			OutputLogMessage("recoil turned OFF\n")
		else 
			OutputLogMessage("recoil turned ON\n")
		end
end
 
if (event == "MOUSE_BUTTON_PRESSED" and arg == 1 and recoil and shoot and auto) then
click = 1
Click()
end
 
if (event == "M_RELEASED" and arg == 3) then
Click()
end
 
if (event == "MOUSE_BUTTON_RELEASED" and arg == 1) then
Stopclick()
end
 
 
 
function Click() 
if stand == false and m249==false and scope==false then
PressAndReleaseMouseButton(1)
Sleep (10)
MoveMouseRelative(0, (6.66/sens))
Sleep (10)
elseif stand == true and m249==false and scope==false then
PressAndReleaseMouseButton(1)
Sleep (10)
MoveMouseRelative(0, (3.33/sens))
Sleep (10)
elseif stand == false and m249==true and scope==false then
PressAndReleaseMouseButton(1)
Sleep (10)
MoveMouseRelative(0, (2.331/sens))
elseif stand == true and m249==true and scope==false then
PressAndReleaseMouseButton(1)
Sleep (10)
MoveMouseRelative(0, (2.331/sens))
elseif stand == true and m249==false and scope==true then
PressAndReleaseMouseButton(1)
Sleep (10)
MoveMouseRelative(0, (2.331/sens))
Sleep (10)
elseif stand == false and m249==false and scope==true then
PressAndReleaseMouseButton(1)
Sleep (10)
MoveMouseRelative(0, (4.662/sens))
Sleep (10)
end
if click == 0 then
Stopclick()
elseif click == 1 then SetMKeyState(3)
else Stopclick()
end
end
function Stopclick()
click = 0
end
 
-----------
 
 
 
if event == "MOUSE_BUTTON_PRESSED" and arg == 6 and auto  then
stand = true
  	elseif event == "MOUSE_BUTTON_RELEASED" and arg == 6 then
stand = false
	end
 
if event == "MOUSE_BUTTON_PRESSED" and arg == 2 then
shoot = true
  	elseif event == "MOUSE_BUTTON_RELEASED" and arg == 2 then
shoot = false
	end
---shoot
if event == "MOUSE_BUTTON_PRESSED" and arg == 1 and auto then
        if shoot then
            repeat
          if stand == false and m249==false and scope==false and recoil==false then
                if (GetRunningTime() - TimeStamp < MaxBreak) and (LastIndex <= recoil_count) then
			i = LastIndex
		else
			i = 1
		end
		while i <= recoil_count do
			Sleep(sleep_duration)
			if not IsMouseButtonPressed(1) then
				LastIndex = i
				TimeStamp = GetRunningTime()
				break
			end
			MoveMouseRelative( (ak_recoil_coordsx[i].x/sens), (ak_recoil_coordsy[i].y/sens) )
			if not IsMouseButtonPressed(1) then break end
 
			i = i + 1
		end
          elseif stand == true and m249==false and scope==false and recoil==false then 
               if (GetRunningTime() - TimeStamp < MaxBreak) and (LastIndex <= recoil_count) then
			i = LastIndex
		else
			i = 1
		end
		while i <= recoil_count do
			Sleep(sleep_duration)
			if not IsMouseButtonPressed(1) then
				LastIndex = i
				TimeStamp = GetRunningTime()
				break
			end
			MoveMouseRelative( (ak_recoil_coordsx[i].x/sens), (ak_recoil_coordsy[i].y/sens) )
			if not IsMouseButtonPressed(1) then break end
 
			i = i + 1
		end
-------m249
          elseif stand == true and m249==true and scope==false and recoil==false then 
                Sleep(11)
                MoveMouseRelative(0, (2.331/sens))
            
 
           elseif stand == false and m249==true and scope==false and recoil==false then
                Sleep(9.5)
                MoveMouseRelative(0, (3.9/sens))
           
-----m249
----scope
           elseif stand == true and m249==true and scope==true and recoil==false then
                Sleep(4.1)
                MoveMouseRelative(0, (3/sens))
           
 
          elseif stand == false and m249==true and scope==true and recoil==false then
                Sleep(5)
                MoveMouseRelative(0, (7.3/sens))
 
        elseif stand == false and m249==false and scope==true and recoil==false then
                 if (GetRunningTime() - TimeStamp < MaxBreak) and (LastIndex <= recoil_count) then
			i = LastIndex
		else
			i = 1
		end
		while i <= recoil_count do
			Sleep(sleep_duration)
			if not IsMouseButtonPressed(1) then
				LastIndex = i
				TimeStamp = GetRunningTime()
				break
			end
			MoveMouseRelative( (scope_ak_recoil_coords[i].x/sens), (scope_ak_recoil_coords[i].y/sens) )
			if not IsMouseButtonPressed(1) then break end
 
			i = i + 1
		end
 
        elseif stand == true and m249==false and scope==true and recoil==false then
                if (GetRunningTime() - TimeStamp < MaxBreak) and (LastIndex <= recoil_count) then
			i = LastIndex
		else
			i = 1
		end
		while i <= recoil_count do
			Sleep(sleep_duration)
			if not IsMouseButtonPressed(1) then
				LastIndex = i
				TimeStamp = GetRunningTime()
				break
			end
			MoveMouseRelative( (scope_ak_recoil_coords[i].x/sens), (scope_ak_recoil_coords[i].y/sens) )
			if not IsMouseButtonPressed(1) then break end
 
			i = i + 1
		end
 
          end
            until not IsMouseButtonPressed(1)
        end
 
 
 
 
 
end
end

Paste this into the scripting section of Logitech Gaming Software, and you should be ready to go!

I took this off a YouTube video, to help get it out there since people seem to want to resell it to make a quick buck. No I will not give credit to anybody, as I have no clue who the hell made it.
#1 · edited ·
at least give credits.. you copy pasta this from another forum
#2 ·
Quote Originally Posted by plsbossiwanthacks View Post
at least give credits.. you copy pasta this from another forum
Name the forum please before calling me out....

- - - Updated - - -

Lol2121121212 on the "other cheating site" like this one, don't know if I can say their name, had the old script and updated his recently to mine and no, he didn't make the script...
#3 ·
The last update to change recoil was Devblog 188, this is one of the most up-to-date recoil scripts out there. Can't get better than this!
#4 ·
Saw your comment on another post, that Razer is shit for scripting, and to get a Bloody Mouse or Logitech. Which one of the two would you actually recommend for Rust?
#5 ·
I personally would get a Logitech mouse, even though they are more expensive in most cases. Scripting is a lot easier to use in Logitech mice, and you can make small adjustments even though it won't be perfect. Bloody mouse seems to have macros that are more accurate right off the bat imo, but after recoil changes are made in Rust it seems to take awhile for someone to actually make a script if you cannot do it yourself, not including some Bloody drivers are actually blocked in some games.

EDIT: I forgot to mention! Logitech does NOT allow anti-cheats to scan its program or its drivers for scripts or mouse movements and must rely solely on Windows get mouse position, so it is un-detectable as of now. Bloody on the other hand, I have no clue about. They are a weird ass Taiwanese based business, and they haven't (to my knowledge) posted anything about program or driver security, so beware!
#6 · edited ·
Does it work with any Logitech gaming mouse?
#7 ·
Look up 'Logitech Gaming Software', and research what mice they support in their program. Then you will find what mice to buy, and which ones not to.
#8 ·
Well, the G903 looks like a solid choice then I guess...
#9 ·
can i get banned for using this? or is this a "safe way"? :P
#11 ·
Quote Originally Posted by HelloagainxD View Post
can i get banned for using this? or is this a "safe way"? :P
Read my comments on the thread, it talks about this...
#12 ·
Dev 194 was changed sprays all weapons.
Honestly, the script isn't even that good. It still has the basic movements as a regular rust anti-recoil script and doesn't account for the horizontal movement, which can't really be dealt with anyway since it's random. Not a bad script, but not a good one either...
#13 ·
Quote Originally Posted by genagrena View Post
Dev 194 was changed sprays all weapons.
Honestly, the script isn't even that good. It still has the basic movements as a regular rust anti-recoil script and doesn't account for the horizontal movement, which can't really be dealt with anyway since it's random. Not a bad script, but not a good one either...
As far as I know, the recoil wasn't changed on DevBlog 194, as it is not listed. Oh and good job copy and pasting my comment from the other forum dumbass.
#14 · edited ·
Doesn't work for me, I have a logitech g402 When i import the script and go in game, press mouse 4, and shoot, nothing happens, just regular recoil, am i doing something wrong? :s
#15 ·
Posts 1–15 of 78 · Page 1 of 6
This thread is closed for replies.

Similar Threads

Soldier Front HacksAnti-Recoil (look here Toxic)BPK 10 CrossFire Hacks & CheatsAnti Recoil HackOMomgnohacks 45 Combat Arms Hacks & CheatsAnti-Recoil hack (ogc AntiRecoil 2.1)SniperJJS13SniperJJS13 51 Battlefield Heroes HacksAnti Recoil Battlefeil Heroes HackTheKamikazes 11 Combat Arms Hacks & Cheats[Release]Working anti-recoil hackJOjohndeer2567 21

Tags for this Thread

None

Need help?