Razer stair building macro

I took @202amaan's marco and exported it into synapse for the razer users.

BUILDING KEYS ARE DEFAULT - F1 F2 F3






The timing is off for it play continuously while holding the bind. Set key to play once and make sure when your running up a ramp that the floor is the first thing that will be placed or youll end up with a roof or wall head of you.

i found it quite useful in battles even just building one little structures with it.


i've attached the file hopefully if have done everything right it can get an approval.

https://www.virustotal.com/#/file/f4...d17e/detection

Hi, It always builds a floor just above my head an I get stuck, usually have 60-80ping, any suggestions??

thanks.

Very nice!!!!, i used the macro in logitech, the trick is, when u activate the macro look down while you're running and jumping and the ramp is very fast.
Thx so much man.

thank you!!

thanks for uploading bro

It works so good! U only need to check under you instead normal view TY!

Works great, TY

Thanks, works well

it still works

Thanks, for the advice. Very helpful to what I was thinking too.

@omg1oe is this the double ramp layer rush?
I think i see some mistakes on your macro....
pressing F3 down->F3 up -> F3 down again -> F3 up -> Click -> F3 again? -> click -> F1-> click -> Missing Q to quickly exit builder mode?
Also the 0.039 sec is a bug from razer, everytime you try to edit or insert something, it drops those numbers to 39 from 40.... And for those people who have high ping, 40 will not help you at all. you will have to increase the delay to at least 0.059+ sec. I use 50ms at 20-40ping.