OutdatedSpeedhack and Wallhack
Speedhack and Wallhack
Here's how to Speed and Wallhack in DBD
With this cheat you can see the aura of the killer, survivors, pallets, windows, totems and traps and you will have a speed increase.
You have to equip Vigil for the auras and Bond for the speedhack.
You can apply the cheat by opening pakchunk0-WindowsNoEditor.pak in "Dead by Daylight\DeadByDaylight\Content\Paks"
with a Hex Editor.
Then search for Perks/Vigil and Perks/Bond.
Make sure to start pasting the bits exactly at 2F as shown in the video.
(do not press Ctrl+V, you have to overwrite the existing bits with Ctrl+B)
The speed hack is only an increase of 20% so that it isn't too obvious,
but you can change the speed yourself by opening the file and changing the float at 22588BE
With this cheat you can see the aura of the killer, survivors, pallets, windows, totems and traps and you will have a speed increase.
You have to equip Vigil for the auras and Bond for the speedhack.
You can apply the cheat by opening pakchunk0-WindowsNoEditor.pak in "Dead by Daylight\DeadByDaylight\Content\Paks"
with a Hex Editor.
Then search for Perks/Vigil and Perks/Bond.
Make sure to start pasting the bits exactly at 2F as shown in the video.
(do not press Ctrl+V, you have to overwrite the existing bits with Ctrl+B)
The speed hack is only an increase of 20% so that it isn't too obvious,
but you can change the speed yourself by opening the file and changing the float at 22588BE
Sorry I posted the wrong offset.
It's actually 21DF9E6 to edit your speed.
It's actually 21DF9E6 to edit your speed.
Speed
How to edit speedhack?
I use wallhack vigil only first match it work next match it not wrok
Is it safe like this? So much hacks for one perk will be way too obvious i think. What range did you put in these perks, 256m?
I think it's 36m which is bond lvl 3 range
The range is 200m
How to do this in epic games version?
Originally Posted by ksardas2015
How to do this in epic games version?
Thanks! works perfectly, can you do this to killer to? that would be awesome
Is it not detected even if I change some of the file contents and run integrity check? Is it not detected by EAC even if it is changed without a separate bypass?
- - - Updated - - -
After tampering with a file, one file is updated if integrity check is performed. Wouldn't this always be caught by the EAC if you play the game without bypassing it?
- - - Updated - - -
The test result works normally. When the integrity check is executed, the file is updated and automatically converted to the original file. However, it was confirmed that the message about EAC was not output during the game, and it works normally when executed without checking the integrity. Speed UP by 20% seems to be too fast than I thought, so if I raise it to the level of about 10%, I think it will be fine.
- - - Updated - - -
I can't really edit speed with my head. Is it possible to share information by reducing the speed to 10% instead of 20%?
- - - Updated - - -
After tampering with a file, one file is updated if integrity check is performed. Wouldn't this always be caught by the EAC if you play the game without bypassing it?
- - - Updated - - -
The test result works normally. When the integrity check is executed, the file is updated and automatically converted to the original file. However, it was confirmed that the message about EAC was not output during the game, and it works normally when executed without checking the integrity. Speed UP by 20% seems to be too fast than I thought, so if I raise it to the level of about 10%, I think it will be fine.
- - - Updated - - -
I can't really edit speed with my head. Is it possible to share information by reducing the speed to 10% instead of 20%?
It works perfect, if the game is updated, does the code change? or serves for future updates
Originally Posted by tkagkr
I can't really edit speed with my head. Is it possible to share information by reducing the speed to 10% instead of 20%?
Look for Single (float32) in the data inspector, that's the speed multiplier.
0,20 is a 20% increase. If you only want 10% you can change it to 0,10.
Originally Posted by Javier198393
It works perfect, if the game is updated, does the code change? or serves for future updates
ty for ur post 
1 question.. is it possible to pass the wallhacking part to another perk? say "borrow time" (which is one that I normally use)
AND if so.... will borrow time behave normally in multiplayer game plus giving me the aura readings?
ty for any info u could provide
1 question.. is it possible to pass the wallhacking part to another perk? say "borrow time" (which is one that I normally use)
AND if so.... will borrow time behave normally in multiplayer game plus giving me the aura readings?
ty for any info u could provide
I tried and at the loading screen a pop up appear saying "Corrupted data found, please reinstall the game"
This thread is closed for replies.
