You should always change the pw... esp if it is an unsecured network.
🙂 Help Portforwarding
Wrong section
Originally Posted by HiddenoO
Kat's method is 50% right..
For one thing, if you don't know your router's protocol user/pass then reset the router by unplugging it, and reseting it manually(Reset button, etc.). Once done if you visit your protocol page, your account will be reseted to the following;
User: admin
Pass: password
You can port forward from there if you know how depending on your router.
And if you have a comcast gateway, in that case it would probably be;
User: comcast
Pass: 1234
For one thing, if you don't know your router's protocol user/pass then reset the router by unplugging it, and reseting it manually(Reset button, etc.). Once done if you visit your protocol page, your account will be reseted to the following;
User: admin
Pass: password
You can port forward from there if you know how depending on your router.
And if you have a comcast gateway, in that case it would probably be;
User: comcast
Pass: 1234
Username: Admin
Password: Admin
:/
Originally Posted by flameswor10
My router is
Username: Admin
Password: Admin
:/
Username: Admin
Password: Admin
:/
http://www.mpgh.net/forum/335-minecraft-hacks/
Just sayin'...
Just sayin'...
It his NAT, don't bother with NAT routers.
/moved .