[Release] CPU and Memory Usage Increaser
[Release] CPU and Memory Usage Increaser
Introduction
"Combat Arms is already running, so shutting down the client". Recognize that error? If your computer is too fast, you'll most likely be getting that error. HackShield Bypass 3.0 injects too quickly, so there needs to be a way to slow down the computer while injecting. For the people that restart their computer to solve this problem, it works because when the computer is restarted, a lot of programs run on startup, slowing down the computer.
Pre-requisites
Microsoft .NET Framework 3.5 (download here)
Microsoft Windows XP or Microsoft Windows Vista.
Programmed in C#.
Product
CPU and Memory Usage Increaser (CAMI), is a tool that can slow your computer down. You can choose three levels of intensity: Normal, Higher, or Intense. For me, Normal works just fine - it slows down the computer enough for me to inject. Higher can really slow down your computer - when I used it, task manager stopped updating all its statistics because CAMI was hogging that many resources. Intense mode may actually freeze your computer, so select your mode carefully. I recommend Normal mode. If you have 1 gigabyte of REMAINING memory and low CPU usage, then you can choose Higher.
Instructions for HackShield Bypass 3.0
1. Download this tool from the attachments at the bottom of this post.
2. Extract the RAR file using WinRAR or another extraction utility.
3. Run this program.
4. Select an intensity mode (Normal, Higher, Intense).
5. Click the button 'Begin CPU and Memory Consumption'.
6. Run the Injector tool (the one with the title UC Private Forums Stealth DLL Injector and the picture of a needle).
7. Run the Bypass (the one with the messagebox title {EH} Injector and a messagebox message of 'Press 'DELETE' to exit without injection').
8. Run the Combat Arms game (the one that has a window with the button 'Game Start', 'Register', 'Home Page').
9. Wait a few seconds.
10. If there is no error message, then you are successful. Click 'Stop CPU and Memory Consumption'. If there is an error message, try again.
Summary (Reiterating the Point)
This tool will slow down your computer so that you can run HackShield Bypass 3.0 injector and bypass. Normally, when you run the injector and bypass with a fast computer, you will get the error message 'Combat Arms is already running, so shutting down the client', so that's why this tool will slow down your computer.
Spyware, Malware, Viruses, Trojans, Keyloggers....
This tool does not contain any spyware, malware, virus, trojan, keylogger, dialer, or joke program. It was scanned with NOD32 Antivirus as you will see in the image below.
Frequently Asked Questions (F.A.Q)
Q: I don't use HackShield Bypass 3.0, does this still apply?
A: No.
Q: I use another bypass with different tools, does this still apply?
A: I don't know.
Q: I did everything you said, but this doesn't work!
A: Post it here.
Q: It froze my computer!
A: Choose a less intensive mode. If you are already at Normal mode, then you have a pretty laggy computer already. You probably don't need to use this tool.
Credits
The concept that the HackShield Bypass 3.0 injection was too quick and needed to be slowed down is credited to Drown2008.
"Combat Arms is already running, so shutting down the client". Recognize that error? If your computer is too fast, you'll most likely be getting that error. HackShield Bypass 3.0 injects too quickly, so there needs to be a way to slow down the computer while injecting. For the people that restart their computer to solve this problem, it works because when the computer is restarted, a lot of programs run on startup, slowing down the computer.
Pre-requisites
Microsoft .NET Framework 3.5 (download here)
Microsoft Windows XP or Microsoft Windows Vista.
Programmed in C#.
Product
CPU and Memory Usage Increaser (CAMI), is a tool that can slow your computer down. You can choose three levels of intensity: Normal, Higher, or Intense. For me, Normal works just fine - it slows down the computer enough for me to inject. Higher can really slow down your computer - when I used it, task manager stopped updating all its statistics because CAMI was hogging that many resources. Intense mode may actually freeze your computer, so select your mode carefully. I recommend Normal mode. If you have 1 gigabyte of REMAINING memory and low CPU usage, then you can choose Higher.
Instructions for HackShield Bypass 3.0
1. Download this tool from the attachments at the bottom of this post.
2. Extract the RAR file using WinRAR or another extraction utility.
3. Run this program.
4. Select an intensity mode (Normal, Higher, Intense).
5. Click the button 'Begin CPU and Memory Consumption'.
6. Run the Injector tool (the one with the title UC Private Forums Stealth DLL Injector and the picture of a needle).
7. Run the Bypass (the one with the messagebox title {EH} Injector and a messagebox message of 'Press 'DELETE' to exit without injection').
8. Run the Combat Arms game (the one that has a window with the button 'Game Start', 'Register', 'Home Page').
9. Wait a few seconds.
10. If there is no error message, then you are successful. Click 'Stop CPU and Memory Consumption'. If there is an error message, try again.
Summary (Reiterating the Point)
This tool will slow down your computer so that you can run HackShield Bypass 3.0 injector and bypass. Normally, when you run the injector and bypass with a fast computer, you will get the error message 'Combat Arms is already running, so shutting down the client', so that's why this tool will slow down your computer.
Spyware, Malware, Viruses, Trojans, Keyloggers....
This tool does not contain any spyware, malware, virus, trojan, keylogger, dialer, or joke program. It was scanned with NOD32 Antivirus as you will see in the image below.
Frequently Asked Questions (F.A.Q)
Q: I don't use HackShield Bypass 3.0, does this still apply?
A: No.
Q: I use another bypass with different tools, does this still apply?
A: I don't know.
Q: I did everything you said, but this doesn't work!
A: Post it here.
Q: It froze my computer!
A: Choose a less intensive mode. If you are already at Normal mode, then you have a pretty laggy computer already. You probably don't need to use this tool.
Credits
The concept that the HackShield Bypass 3.0 injection was too quick and needed to be slowed down is credited to Drown2008.
Can't wait till its released.
U make great things, i know ur work from R4gZ0n3 xD
U make great things, i know ur work from R4gZ0n3 xD
why would u want something that increases your cpu and memory usage???????????????????????????
To Zander145: This time it's not good. I'm not familiar with the type of program.
To killthekampers: You'll find out xD.
To killthekampers: You'll find out xD.
CPUkiller works great too, very simple easy to use program. Id upload it but id be a no good leecher.
I shoulda known something like cpukiller existed...Waste of time for me cuz my program obviously doesn't compare.
lol nice program i actually just posted a tutorial about how to fix this error before you posted lol but this will work tho
how about u just End the Process?
Originally Posted by dkzeria
how about u just End the Process?
Wouldn't this like mess up ur cpusage to other computers o_o
Originally Posted by iGascan
Wouldn't this like mess up ur cpusage to other computers o_o
Is This Legit. Or Just A Way To Get People PC Info?
It's completely legit. The only information it gets is your total physical memory, available physical memory, and CAMI memory usage. It doesn't send any information to anybody. You can run this program with a firewall on and notice that there aren't any connections inbound or outbound. It does it's job and thats it.
ahhhh now i see what the point of slowing down your computer is
I jsut wrote an autoit code that kills the hidden window. It's..not that serious.