Your help, doesn't help. <What now?>
Your help, doesn't help. <What now?>
Gah, every hack/injector I fail tries, I have one of the following problems:
1) The injector is picked up by Norton before I can choose to save it. (See, hinjector.)
1a) No, I won't disable Norton, try again.
2) The hack or injector, or both, are picked up by Norton after I download them, I fix this by saving them to a folder I protected from Norton's auto-detect, problem solved.
3) The injector tells me to load Metal Assault before injecting and then says it "killed" Metal Assault because it was running, and doesn't inject.
4) The inject of the hack "succeeds" and then Metal Assault gives me an error saying ".dssomething" is missing (I could get a screenshot of this if you need it.) and is forced to close, and the hack doesn't get injected anyway.
Side notes:
1) I have tried running the injector both as administrator (I'm on the admin account anyway.) and as a normal user, and the problems above still occur.
2) I have targeted MAS.exe and chosen the trainer .dll on the injectors that ask me to do so.
3) I think this is immensely fail because nothing works and none of the "Having trouble with injecting?" posts/threads say something I haven't tried.
In short I cannot get this, or any other inject-based hack to work, what the heck am I doing wrong that no one else seems to have a problem with? (Or at least, no one has mentioned as having a problem with.)
1) The injector is picked up by Norton before I can choose to save it. (See, hinjector.)
1a) No, I won't disable Norton, try again.
2) The hack or injector, or both, are picked up by Norton after I download them, I fix this by saving them to a folder I protected from Norton's auto-detect, problem solved.
3) The injector tells me to load Metal Assault before injecting and then says it "killed" Metal Assault because it was running, and doesn't inject.
4) The inject of the hack "succeeds" and then Metal Assault gives me an error saying ".dssomething" is missing (I could get a screenshot of this if you need it.) and is forced to close, and the hack doesn't get injected anyway.
Side notes:
1) I have tried running the injector both as administrator (I'm on the admin account anyway.) and as a normal user, and the problems above still occur.
2) I have targeted MAS.exe and chosen the trainer .dll on the injectors that ask me to do so.
3) I think this is immensely fail because nothing works and none of the "Having trouble with injecting?" posts/threads say something I haven't tried.
In short I cannot get this, or any other inject-based hack to work, what the heck am I doing wrong that no one else seems to have a problem with? (Or at least, no one has mentioned as having a problem with.)
i ll give u sum better solution bro.. so u can use some hacks on metal assualt 
i ll upload sum stuff that will make it work for u ok...
i uploaded everything here so u can use them..
http://www.media fire.com/?pb99lop9lqz50ci
remove the space between media fire plz..
try it but first use the fixit.. exe ok..
it will definitly work.. thanks
and also use other antivirus.. like escan.. norton corporation edition.. or etc only norton sucks.. but others they work fine..
i ll upload sum stuff that will make it work for u ok...
i uploaded everything here so u can use them..
http://www.media fire.com/?pb99lop9lqz50ci
remove the space between media fire plz..
try it but first use the fixit.. exe ok..
it will definitly work.. thanks
and also use other antivirus.. like escan.. norton corporation edition.. or etc only norton sucks.. but others they work fine..
Originally Posted by azharr65
i ll give u sum better solution bro.. so u can use some hacks on metal assualt
i ll upload sum stuff that will make it work for u ok...
i uploaded everything here so u can use them..
http://www.********e.com/?pb99lop9lqz50ciⓘ
try it but first use the fixit.. exe ok..
it will definitly work.. thanks
i ll upload sum stuff that will make it work for u ok...
i uploaded everything here so u can use them..
http://www.********e.com/?pb99lop9lqz50ciⓘ
try it but first use the fixit.. exe ok..
it will definitly work.. thanks
Boooooooooooooooooom,outside link.
or u targeted Mas.exe wrong.. its supposed to be _Mas.exe ; notice the underscore "_"Mas.exe
Try the newest update that I just uploaded. Should fix it.
mas pub hack
Originally Posted by Dave84311
Try the newest update that I just uploaded. Should fix it.
now i dont know what to do what i found to work i got winject i got the fixit thing ok i downloaded the hack took the hack file (the dll) and put it in a folder opened winject found the folder took the dll started metal assault went to any channel (other then channel 1 it doesnt work there) then went back to winject opened the mas.exe and injected now it says (winject) that there was something wrong but the hack works fine and that is the way i use it. and just a fyi the hack i am using is dave's
Well, you're going to have to do something about Norton. I had the same problem with AVG Anti-Virus and had to put the .dll and injector on my whitelist/exclude.
Norton will not allow your system to run the .dll even if you put it on a folder that Norton cannot see. Remember, you're trying to run a hack against an anti-virus that's built to prevent such programs from interfering with your computer.
It's like trying to drive a car into a brick wall.
Norton will not allow your system to run the .dll even if you put it on a folder that Norton cannot see. Remember, you're trying to run a hack against an anti-virus that's built to prevent such programs from interfering with your computer.
It's like trying to drive a car into a brick wall.
I use Norton, here is my help.
Alright man. With Norton, it's a bitch. I had to work around it too.
But here is the thing. If you don't want Norton fucking everything you download, here is what you do.
STEP NUMERO UNO.
Open up norton by clicking the teeny-tiny icon in the botton right corner.
TWO
Go to settings
THREE
Go to ANTIVIRUS AND SONAR EXCLUSIONS
Click Configure on the top two. (Items to exclude from scans + Items to exclude from auto-protect and SONAR detection.)
FOUR
Click add, and find the directory with your injector/spammer/hack/whatever.
Click add
Then apply.
Then Norton SHOULD ignore anything in there.
Just make sure anything you put in there is TOTALLY safe. (PerX for example, been using it forever, no issues, and Norton went insane over it.)
Any other questions? message me.
@Coranho
Let me know if it worked
But here is the thing. If you don't want Norton fucking everything you download, here is what you do.
STEP NUMERO UNO.
Open up norton by clicking the teeny-tiny icon in the botton right corner.
TWO
Go to settings
THREE
Go to ANTIVIRUS AND SONAR EXCLUSIONS
Click Configure on the top two. (Items to exclude from scans + Items to exclude from auto-protect and SONAR detection.)
FOUR
Click add, and find the directory with your injector/spammer/hack/whatever.
Click add
Then apply.
Then Norton SHOULD ignore anything in there.
Just make sure anything you put in there is TOTALLY safe. (PerX for example, been using it forever, no issues, and Norton went insane over it.)
Any other questions? message me.
@Coranho
Let me know if it worked
I'm pretty sure he knows how to inject a .dll file, so that's not the problem.
The problem resides on his PC and the processes that he might be running.
He clearly pointed it "I can't not run Inject Based Hacks", if that's the problem I'm sure there are many trainers out there, if you don't find some simple PM me and I'll code one for you with similar features on D3D.
Or use MATOOL v2.1 which is an .exe file
Also, anti viruses will always ruin things between injectors and the PC if you don't want to "uninstall", simple add an exclusion and re-download the files to that location.
Use task manager to check what processes are running, if is possible post a screenshot of the error you're getting and the list of running processes.
The problem resides on his PC and the processes that he might be running.
He clearly pointed it "I can't not run Inject Based Hacks", if that's the problem I'm sure there are many trainers out there, if you don't find some simple PM me and I'll code one for you with similar features on D3D.
Or use MATOOL v2.1 which is an .exe file
Also, anti viruses will always ruin things between injectors and the PC if you don't want to "uninstall", simple add an exclusion and re-download the files to that location.
Use task manager to check what processes are running, if is possible post a screenshot of the error you're getting and the list of running processes.
Wrong section change...
tell dave.....
tell dave.....
Yeah I was curious as to what happened
also lol @ norton
also lol @ norton
This thread is closed for replies.