How to Inject a hack.

How to inject a hack, and possible solutions to non-working undetected hacks.

I know there are probably a lot of guides like this, but I'll be going through this one with a bit more-in-detail.
A lot of people are complaining about hacks not working, I used to be that, but I followed what people posted and got every hack now released, to work.
So enjoy the tutorial, hope you guys have all your problem solved.
How to INJECT.
1. Check here for UNDETECTED INJECTORS.
2. Download an UNDETECTED HACK from the hack sections.
3. Extract the injector and the hack.
4. Open your injector and add the .dll hack to the injector.
5. Open up Cross Fire.
6. When HGWC finishes, wait 2 seconds for Cross Fire to open up and inject your hack.
7. Enjoy your hack.

Below are a few reasons why your hack may have not worked properly.
Reason #1
You may be missing a couple of things.You need to install a few things if your injected hack does not work;Microsoft Visual C++ and .Net Framework 4
With these, your problem may or should be fixed. Not guaranteed, though.

Reason #2
The injector your using may be detected.
Your injector may be detected, therefore your hack will not run. Check here for a list of undetected injectors.

Reason #3
Set your injector settings of your injector to "auto inject."
Okay, not really a reason why hacks may not work, but some people don't tend to put "auto inject" as a setting for your injector. Time is precise, your hack should be injected before X-Trap detects that a program has been infected onto Cross Fire.

Anyways, short and sweet tut. If you have anything to add onto this, please post.

Thank you @bboycling for the help.

How to Inject a hack.

Post a Reply

Tags for this Thread