[Release] All v.60 Hacks, Bots, etc.

This is my shared version of v60 All Map pVac, just for those people who are new to wz editing ^^
BTW~ I also have a TUT on making all map pVacs in Belie's super thread, or can look on front page and you'll see my tut.
K

Directions Downloading
1. Download my ultra tiny patcher here~
MEGAUPLOAD - The leading online storage and file delivery service
v60.exe
2. Open the patcher and select your MapleStory folder v60 (map.wz MUST be clean)
3. Click patch
Note: If your computer is slow let it load for a bit, don't rush it Rolling Eyes
4. Enjoy the hack and have fun~

Directions Using
1. Log into maplestory and go on a map with monsters
2. If your on the map alone they should go to the left. If your not on the map alone you have to TOUCH the monster by attacking it.
3. Kill when they go to the left~
4. Enjoy~

Explantion :
Ranged Passive Vac is based on regular Passive Vac method (Left, Right walk Randomizer)
Mostly, Monsters will walk to the Left, Right of the map with Regular Passive Vac until the will hit the end of the map.
All we need to do is find the Foothold that contains the end of the Map by Finding a Foothold which contains the value of Next = 0.
Why ? Because if Next = 0, that means the mosnters cant walk to the right after they hit that Foothold (Because there is a Wall).
So we track his Prev value which will lead us few steps before we hit the wall. After that, The only thing we need to do is change the value of Next and Prev to 0

Tools :
* WZ files Editor (dEMsWz is the best in this case)
* Version 0.60 of MapleStory's WZ files
* Basic knowlage of Passive Vac (The way it works)

Tutorial :
* Open dEMsWz and load the file : Map.wz
* Find the map you want to passive vac there
* Find a foothold which contains a value of Next = 0
* After we find it, Track his Prev value, and go to that Foothold
* Edit Next and Prev to 0 in that Foothold
* save and close

Exemple :
Map ID : 260020200
foothold.3.0.26.prev 22 (Change to 0)
foothold.3.0.26.next 27 (Change to 0)
foothold.3.0.27.prev 26 (Let track his prev value to foothold number 26)
foothold.3.0.27.next 0 (Means that foothold contains the boundry of the wall)


Note : Dont forget, You still have to edit the rest of Foothold's Prev's to 0 for passive vac

OK with 0.60 released I have prepared some new Patchers.



Item Control

This is a full edit of item.wz. Here's what i have tested so far:
- Untradable/Quest items: Can now be NPCed, but trying to trade results in DC
- Items dont expire: Couldn't test yet


MEGAUPLOAD - The leading online storage and file delivery service

**********: Easy Filehosting



Unhide NPC/TV Off

Does what the name says - Disables Maple TV (Just lags anyways) and unhides NPCs.


**********: Easy Filehosting

MEGAUPLOAD - The leading online storage and file delivery service



Undead
The classic undead for all monsters. Probably only interesting for Clerics/Priests/Bishops... Pure undead, nothing else!

MEGAUPLOAD - The leading online storage and file delivery service

**********: Easy Filehosting



Unhide Minimap

As the name says - unhides the minimap at places were it is normally disabled. Nothing more!

**********: Easy Filehosting

MEGAUPLOAD - The leading online storage and file delivery service


to be continued...

What are a list of maps that the passive vac would be good at?

Me and my friends on the CEF that have been using it did it on these maps

HHG2
12 of the ariant maps depending on level, that place is awesome, if you need help determaning which one is best for you, I'll help there


heres a good place to hunt with pvac:

lvl 8-20 HHG2
lvl 20-27 East Rocky Mountain 4/5
27-43 ariant maps, depending on damage amount/class, you will have to pick one
lvl 43-50 Piano Room/Study (Nightmares)
50+ water goblins in zangapu

Do you have any other suggestions I should add to the list?

1. Download Here ^^
NoJump.exe
2. Folow steps for using patcher above.

1. Open DeMsWz
GMS:Download Here
EMS:
Download Here
2. Open Mob.wz
3. Uncheck all except view only
4. Find your monster offset and search it
5. Change it to 7E and save.
FOLLOW BELOW!


You can find Monster ID's on sauna.gibbed.us, MapleTip or GM Handbook

This is a tutorial for botting on flat maps only.

This is how:

Set your vac to a wall. Lets say right

For this to NOT d/c at all, you cant have miss godmode, or damage control unfortunately. You will need to use your HP pots.

The vac goes to the right wall. Set your character on the wall, have auto skill on the skills you want.

_____________________[] []=Vac

Set your guy in the [] and you will be pushed out while attacking, then mobs will come back in the push you back into the vac, then you will get pushed BACK out again eventually.

Have these running:
Auto attack
Auto loot (optional if you need the meso from the waste of HP pots)
Pixel potting on MP and HP
Auto skill on skills you want
[optional] If the monster has magic attack, i highly recommend holding the -> key so you dont get pushed out

Maps for botting:
Lvl 28-38
Sunset Road: North Desert Road 2

Lvl 38-(48-55)
Zipangu: A Night in the Forest

Lvl 50-70
Mu Lung: Practice Field: Beginner

Lvl 70-100
Zipangu: Vanished Village

(If belie or whoever would release his Dumb Mob WZ hax, then this place would be much more efficient because the samiho curse you, halfing your EXP)

Lvl 100+
Zipangu: Encounter with the Buddha

These may be not so good for you and the lvl range is just a guess =P
Some classes hit better than others, and can move on later

Character.wz V 60:
Has attack speed hack for all classes.
Note: Attack more than 3 times and you dc, and I didn't mass edit attackSpeed as it fails on mages, so credits go to me.
Added 99% knockback rate for archers
Has pointless client sided changes on character animation
link to bare .wz archive (Please create a patcher): Character.rar

Mob.wz V 60:
Added monster magic attack disarm
Added no jump
Added moon bunny invincibility
Added pushed even if low damage
Added undead hack
Added boss HP bar
link to part 1: Mob.part1.rar
link to part 2: Mob.part2.rar
Again, please create a patcher for this, i'll thank you.
And if you want the accuracy/damage control, put MADamage, PADamage, and acc to 0.
It d/cs you, so i didn't put it in there.

Skill.wz V 60:
Has 99% Final attack
Has 150 tele range
Has ***on=0 client sided
Has invisible skills visible
link to bare .wz archive (Please create a patcher): Skill.rar

1. MsInfo should display the MapleStory Info such as Channel, char xy, etc.
2. Pin Type WILL give HAD if left on for more than 30 seconds.
3. NoBreath and Uber Tubi needs no GGCrc bypass
4. UA works by moving your character to reset the attack counter

This is Dynamic, and unless the offets or my aobs change, it should work in the next version.
Http://forum.****************/download.php?id=40501

A simple Auto Channel Changer that will change channel no matter what, if there are more than the specified number of people in your map, it will keep changing to the next channel until it finds a valid one.

Http://forum.****************/download.php?id=40483

Well here it is
deMSwZ_v.2.1.1_src.rar