DetectedSinBotv2.4 Public Version!

Posts 106–120 of 1,104 · Page 8 of 74
[QUOTE=Moheemo;5109083]So tell me if I got this right,
You start the bot and then press insert
then even though you hit the insert (start) button the bot never leaves the boat??
even though in the top left corner in the info box it saids skipping to boss room?

Quote Originally Posted by Moheemo View Post
Okay I know how to fix this.
What you have to do is first
Open the README
Start the bot (don't start vindictus yet)
In the bot, go to binds
Now in the readme go to default commands (I am assuming that you use Danksols)
You have to compare each command from the binds in the GUI and the Binds in the readme
Make sure that they ARE THE SAME
They have to be the same for it to work
If they arent they same change them to be the same



Did This help you @Darkspirith?



Something like this? http://www.mpgh.net/forum/search.php?searchid=357339 Hope this helps




If I helped you guys you should thank me by pressing the "thank button"
@Moheemo Thanks for the suggestion, I will try it out now. Just to make sure, if the binds are incorrect in the GUI they must be switched to the default binds listed in the README correct?

EDIT: I've noticed that some binds in the GUI aren't listed in the README default settings, do I leave them as they are? If so, what if they're using a command for a different bind listed in the default settings? Do I just make the bind into a command not used? This shit is too confusing for me, lol.

ALSO, I have read the entire README.txt..... I still can't get it to work :/
Quote Originally Posted by x2ruff4u View Post
I would like to donate for the donators edition. Do i just donate and contact you for the bot or on here????

also what is good to donate
Whatever you want to donate is fine, however much you think the program is worth to you. Send me an email at ZaiakuWAR at hotmail.com if you do, with your MPGH name, transaction ID, and email you wish to be contacted by.

Quote Originally Posted by Greenwich View Post
Since I'm still playing around /w it, one quick suggestion is restore default option - specifically on the timers tabs.
Good suggestion. I'll put in something like that in next release, if I can figure out where to squish another button.

Quote Originally Posted by ErrorProxy View Post


What?.. 2.3 did that by itself, why did you make 2.4 not?

But it is still limited. trained skills will only last so long. There will be no trained skills after. Only if you could somehow make the bot +1 to every skill so you can keep training the skills you want.




Did anyone answer this?

Is there a way to see your most recent posts, like a list?
Because people were complaining that it would click it off again, and I couldn't figure out how to make it stop. And you can have 20-30 different skills with 1 AP in them. I've botted for 24 hours, spending 15k AP+

And WQ for straight money. Contract for scroll money. Contact/Buried Sorrow/Rescue/couple others for mats money.

Quote Originally Posted by Greenwich View Post
removed suggestion, noticing some probs. with 2.4
Elaborate please!

Quote Originally Posted by ErrorProxy View Post


I think he's saying he doesn't run (not far enough distance) into the boss to fight. I've had this problem before.

Make sure you did not use the speed hack before you start the bot. If you have, toggle it off then run the bot.


On your question of him being in America or not. I have seen smart people "type liek diss" They like to type like idiots on the internet. I don't know why.
Ah. That would make sense.
@aujv - Please read the troubleshooter guide. There are a couple basic things in there you should try.

And there's a difference between:
I r can haz funzies tlkn lyk dis, I iz so speshul!
And:
I this talk special like and fun having can am do is.

I've noticed that some binds in the GUI aren't listed in the README default settings, do I leave them as they are? If so, what if they're using a command for a different bind listed in the default settings? Do I just make the bind into a command not used? This shit is too confusing for me, lol.

ALSO, I have read the entire README.txt..... I still can't get it to work :/
The binds in the readme are the binds in the original GUI set-up. They are my binds copy-pasted straight my my normal setup.

They should all match.
Quote Originally Posted by Zaiakunokami View Post

The binds in the readme are the binds in the original GUI set-up. They are my binds copy-pasted straight my my normal setup.

They should all match.
Then I don't understand why this won't work? I can start up the bot fine, I hit insert for it to start up, starts at the very beginning, moves in a very fast speed, when the mobs spawn it weilds mine bombs and just goes around in a circle (not throwing them) until it gets hit by mobs, and just dies. This has happened on 2 maps that I tried (Trampled Plains and Where the Legend Sleeps).

EDIT: I'm using DankSold 1.2, VinV5b.dll and PerX.
Most of the maps work wonderfully, thanks for the hard work.
However, I can't seem to get Hoarfrost Hollow In Flames to work. It just goes to the boss room, stops, then forfeits.
I can manually take it to the boss room and it seems to start up the script to clear the boss room. However, then the Replay script just repeats, even after it gets to the boat.
Quote Originally Posted by muffin42909 View Post
Most of the maps work wonderfully, thanks for the hard work.
However, I can't seem to get Hoarfrost Hollow In Flames to work. It just goes to the boss room, stops, then forfeits.
I can manually take it to the boss room and it seems to start up the script to clear the boss room. However, then the Replay script just repeats, even after it gets to the boat.

im also starting to notice this too. It does it in fruitful and other ones that require to many skip stages and then forfeits or just stays still and messes up
I can't seem to get this to work. I am using the donator version too....

When I try to run What the dead leave behind I can't get it to work. I load up danksole's dll and VinV5b.dll. I press no when it asks me to start in console mode. I get into the game find and go to start up a boat... I press the home button when I am in the boat to turn on dank soles dll and then I pick the bot and press start. I immediatly crash... Ok then I try to use the config files and put the config file in the right place.. I load up both dll's and select no to running in console mode.. I load up the boat and start the bot but nothing happens. So then I renamed piesettings to settings.ini and then reload the game without dank soles dll and just use VinV5b. I try to start up a boat and when I do it works but when I get to the final stage it does abesolutly nothing... Ok so then I remove the config file and use my old one. I load up vindictus, put my defualt settings for the bot back to normal, inject both dlls, and press yes for console. I use the binds from the readme and bind them.. I load up the boat and get to the final stage but nothing happens.. Really frustrating.. Someone help....
THE OFFICIAL HELPNESS!!
THIS POST IS FOR EVERYBODY WHO IS HAVING TROUBLES WITH THE BOT (Cant run far enough into room, god, ohk, or any hacks not working etc)

In the picture below is my setup, copy to yours and it should work.
MAKE A BACK UP OF YOUR CURRENT SETUP just in case, you can do that with a photo.
If the word is cut off and you cant guess or just am unsure ask and I will inform.

If this helps please thank by pressing the button marked "Thanks"

P.s. This is what works for me, the original bind setup didn't work so I tweaked and this works spot on

Remeber to thank!
Capture.PNGattachment deleted · 40 downloads before removal
Quote Originally Posted by Moheemo View Post
THIS POST IS FOR EVERYBODY WHO IS HAVING TROUBLES WITH THE BOT (Cant run far enough into room, god, ohk, or any hacks not working etc)

In the picture below is my setup, copy to yours and it should work.
MAKE A BACK UP OF YOUR CURRENT SETUP just in case, you can do that with a photo.
If the word is cut off and you cant guess or just am unsure ask and I will inform.

If this helps please thank by pressing the button marked "Thanks"
Ah hopefully I can finally get it to work! Awaiting approval :x.
Quote Originally Posted by chaosbelow View Post
I can't seem to get this to work. I am using the donator version too....

When I try to run What the dead leave behind I can't get it to work. I load up danksole's dll and VinV5b.dll. I press no when it asks me to start in console mode. I get into the game find and go to start up a boat... I press the home button when I am in the boat to turn on dank soles dll and then I pick the bot and press start. I immediatly crash... Ok then I try to use the config files and put the config file in the right place.. I load up both dll's and select no to running in console mode.. I load up the boat and start the bot but nothing happens. So then I renamed piesettings to settings.ini and then reload the game without dank soles dll and just use VinV5b. I try to start up a boat and when I do it works but when I get to the final stage it does abesolutly nothing... Ok so then I remove the config file and use my old one. I load up vindictus, put my defualt settings for the bot back to normal, inject both dlls, and press yes for console. I use the binds from the readme and bind them.. I load up the boat and get to the final stage but nothing happens.. Really frustrating.. Someone help....
Using that final set-up(My default binds from readme), go into any random dungeon (without SinBot running) and press these buttons in order, with a second or so delay between each keystroke.

Numpad 4 / Numpad 7 / Numpad 0 / Numpad - / Up / Right / Page Up
(Tiny) / (Spears) / (God) / (OHK) / (Trans 1) / (Trans 2) / (Tentacle)

If nothing happens while doing those keystrokes, then the problem lies within the binds themselves, and they aren't set correctly somehow. Either being input wrong within Danksole, or the dll is improperly injecting, or these command set is wrong in danksole.ini

If the proper skills and commands are happenign while you are doing that, the problem lies within the bot. Either the binds are off in the GUI, it isn't running in administrator mode, or something got messed up in the code.

If everything looks right, and it still isn't working. Try a different map. What the Dead Leave Behind is notoriously buggy, even for me.

Quote Originally Posted by muffin42909 View Post
Most of the maps work wonderfully, thanks for the hard work.
However, I can't seem to get Hoarfrost Hollow In Flames to work. It just goes to the boss room, stops, then forfeits.
I can manually take it to the boss room and it seems to start up the script to clear the boss room. However, then the Replay script just repeats, even after it gets to the boat.
Quote Originally Posted by x2ruff4u View Post
im also starting to notice this too. It does it in fruitful and other ones that require to many skip stages and then forfeits or just stays still and messes up
Trying to do these multiple boss room maps is a serious pain in the ass. Doing the best i can with them, but between the mini-map detection and the pathways to the different boss rooms, it just screws up a lot on other machines.

It's partially because everyone runs at different specs, so I can't just program a specific number for the bot to look for. Even pure black isn't the same black on all machines. I've had people report what should be 0 black, actually be 1,000,000+ in the decimalized version of the hex color scales. And you just can't add massive tolerances, because the it starts detecting when it shouldn't...

I'm working on better ways of doing this, but it is difficult, I have a busy schedule, and to be perfectly honest. I'm not really an expert coder or anything, so I only partially know what the hell I'm doing. I know it seems that I do sometimes, but don't be fooled.

-------------------------

And speaking of being busy. I'm quite tired now, so I'm going to be getting some sleep before 3 hours of classes and 8 hours of work tomorrow.
Quote Originally Posted by ErrorProxy View Post


What?.. 2.3 did that by itself, why did you make 2.4 not?

But it is still limited. trained skills will only last so long. There will be no trained skills after. Only if you could somehow make the bot +1 to every skill so you can keep training the skills you want.




Did anyone answer this?

Is there a way to see your most recent posts, like a list?
See page 8 on this thread, scroll through, I answered it


Hey Z,
Do you know when the photo will be approved?
Greetings Zaia,

First of all, thank you for the wonderful program! But, I seem to be having a slight problem. (Donor version by the way.)
During the completion of one to two cycles, the bot will redirect to the Boat Launch area while the "Checking for Battle Clear" message will pop up, which is followed by the character running in the boat for about 15 seconds, then, the "Something has gone wrong, etc." message pops up, and nothing comes of it. But I think it may have something with the Timers, although I'm not sure.

I am using 64-bit, and this was happening in the BQ Hoarfrost Hollow in Flames.

My delay timers are:

Launch Button: 15---Error Check Delay: 20
First Map Delay: 20---Mini-Map Delay: 12.5
Between Map: 15---Battle Clear Delay: 30
Skill Run Delay: 1---Battle Clear repeat: 50
Replay Delay: 35---Boat Check: 35
Error Check: 30 ---Dock Wait:50

If this has already been addressed, then I apologize for making you read this.

You have my thanks.

Oh, the events that lead to this problem are:
Just completed Hoarfrost in Flames, was starting the Replay feature, transitioned to boat, character walked forward while making the "Grab" (Lann) animation, and the "Checking for Battles cleared" message popped up. Hopes this other info was helpful in debunking this!

Editing Once more: It was a Timing Delay issue, it has been resolved!
Goooooood Job
Can someone please Comfirm if the Timer working when doing RAID with this bot please.
Okay guys kind of a noob here. I have donated to Zaia for his hard work and cannot figure out how to get the the donator version to work. I have sent Zaia and email with the confirmation email and the confirmation number from the paypal. Can someone please help me.
Quote Originally Posted by hail2kota View Post
Okay guys kind of a noob here. I have donated to Zaia for his hard work and cannot figure out how to get the the donator version to work. I have sent Zaia and email with the confirmation email and the confirmation number from the paypal. Can someone please help me.
I believe he is sleeping right now but from what I've read he will send you a download link for the Donators Verison. Just give it until tomorrow when he's back on .
Posts 106–120 of 1,104 · Page 8 of 74
This thread is closed for replies.

Similar Threads

Talk with us