nvm, Wrong topic. -_-
Vindcitus EU Bot
OK currently got working everything until bosses are dead (nightmare at the ruins), then the battle complete board doesn't appear, only mouse cursor but nothing happens... infinite waiting unless I quit the dungeon because it shows it's not complete even when the bosses are dead.
I'm using only old 133.dll and sinJect, because vin.dll and conso.dll from Console + Inject folder doesn't work at all for me... Got widescreen monitor. I use custom 16:10 aspect ratio and 1680x1050 resolution + Full screen mode. Also confirmed the resolution at the bot resolution window.
Commands added to "Pub Console by Hell_Demon & Nicdel[EU Version]":
bind END changelevel2
bind F5 cc_set_sub_weapon javelin_lvl2 999
bind F9 ohk
bind F8 godmode
bind DEL cc_send_start_game_message
I'm using only old 133.dll and sinJect, because vin.dll and conso.dll from Console + Inject folder doesn't work at all for me... Got widescreen monitor. I use custom 16:10 aspect ratio and 1680x1050 resolution + Full screen mode. Also confirmed the resolution at the bot resolution window.
Commands added to "Pub Console by Hell_Demon & Nicdel[EU Version]":
bind END changelevel2
bind F5 cc_set_sub_weapon javelin_lvl2 999
bind F9 ohk
bind F8 godmode
bind DEL cc_send_start_game_message
Originally Posted by hellzer
OK currently got working everything until bosses are dead (nightmare at the ruins), then the battle complete board doesn't appear, only mouse cursor but nothing happens... infinite waiting unless I quit the dungeon because it shows it's not complete even when the bosses are dead.
I'm using only old 133.dll and sinJect, because vin.dll and conso.dll from Console + Inject folder doesn't work at all for me... Got widescreen monitor. I use 16:10 aspect ratio and 1680x1050 resolution + Full screen mode. Also confirmed the resolution at the bot resolution window.
Commands added to "Pub Console by Hell_Demon & Nicdel[EU Version]":
bind END changelevel2
bind F5 cc_set_sub_weapon javelin_lvl2 999
bind F9 ohk
bind F8 godmode
bind DEL cc_send_start_game_message
I'm using only old 133.dll and sinJect, because vin.dll and conso.dll from Console + Inject folder doesn't work at all for me... Got widescreen monitor. I use 16:10 aspect ratio and 1680x1050 resolution + Full screen mode. Also confirmed the resolution at the bot resolution window.
Commands added to "Pub Console by Hell_Demon & Nicdel[EU Version]":
bind END changelevel2
bind F5 cc_set_sub_weapon javelin_lvl2 999
bind F9 ohk
bind F8 godmode
bind DEL cc_send_start_game_message
The reason for this is simple: the mouse doesn't click the start button, probably because of wrong resolution, so it clicks somewhere else, instead of clicking the start button.
Originally Posted by kache
The reason that happens is because the bot sends the skipboat message BEFORE pressing Start.
The reason for this is simple: the mouse doesn't click the start button, probably because of wrong resolution, so it clicks somewhere else, instead of clicking the start button.
The reason for this is simple: the mouse doesn't click the start button, probably because of wrong resolution, so it clicks somewhere else, instead of clicking the start button.
Tried to change resolution. After doing so bot doesn't even execute the skip command and nothing at all.
Originally Posted by alberto3223
Hey , thanks for posting the bot but it aint working for me on EU :[
Heres what i do :
1. Runing the SinJect and highlighting "Vin" & "conso"
2. Runing Vindictus and logon my acc
3. Binding those binds in the console :bind "END" "changelevel2
bind "F8" "god"
bind "F9" "ohk"
bind "F5" "cc_set_sub_weapon javelin_lvl2 999"
bind "F7" "cc_set_sub_weapon handbomb_lvl2 999"
bind "F6" "cc_set_sub_weapon mining_bomb 999"
Bind "DEL" "cc_send_start_game_message"
4. Then i go Vindictus and choose " Prepare For Counter Attack " and watting in the boat
5. Then i turn on the Bot by runing "Start.exe" ( as Administrator )
6. Choosing there "PreaperForCounterAttack" and then clicking "start" and chosing game fast as it says
7. When in choose game the Bot start the Battle then it skips map to the bosses turning on the God and Ohk and starting walking
But it always stucks in somthing and aint reaching bosses
when that happen game minimizing and i get some Error
Runing on 1280 x 1024 Res , Full
Edit :
Just tried the new Version EU bot V2
and still same problem my char always sucks in somthing
and then i get error , says its got some problem at Line 52
Heres what i do :
1. Runing the SinJect and highlighting "Vin" & "conso"
2. Runing Vindictus and logon my acc
3. Binding those binds in the console :bind "END" "changelevel2
bind "F8" "god"
bind "F9" "ohk"
bind "F5" "cc_set_sub_weapon javelin_lvl2 999"
bind "F7" "cc_set_sub_weapon handbomb_lvl2 999"
bind "F6" "cc_set_sub_weapon mining_bomb 999"
Bind "DEL" "cc_send_start_game_message"
4. Then i go Vindictus and choose " Prepare For Counter Attack " and watting in the boat
5. Then i turn on the Bot by runing "Start.exe" ( as Administrator )
6. Choosing there "PreaperForCounterAttack" and then clicking "start" and chosing game fast as it says
7. When in choose game the Bot start the Battle then it skips map to the bosses turning on the God and Ohk and starting walking
But it always stucks in somthing and aint reaching bosses
when that happen game minimizing and i get some Error
Runing on 1280 x 1024 Res , Full
Edit :
Just tried the new Version EU bot V2
and still same problem my char always sucks in somthing
and then i get error , says its got some problem at Line 52
I added a new tab with the V2, if you havent notice check my first post and the readme file
Originally Posted by hellzer
No, the boat starts at the first time but when it kills bosses, nothing happens. No "dungeon complete" board.
Tried to change resolution. After doing so bot doesn't even execute the skip command and nothing at all.
Tried to change resolution. After doing so bot doesn't even execute the skip command and nothing at all.
Originally Posted by hellzer
No, the boat starts at the first time but when it kills bosses, nothing happens. No "dungeon complete" board.
Tried to change resolution. After doing so bot doesn't even execute the skip command and nothing at all.
Tried to change resolution. After doing so bot doesn't even execute the skip command and nothing at all.
Originally Posted by kache
The reason that happens is because the bot sends the skipboat message BEFORE pressing Start.
The reason for this is simple: the mouse doesn't click the start button, probably because of wrong resolution, so it clicks somewhere else, instead of clicking the start button.
The reason for this is simple: the mouse doesn't click the start button, probably because of wrong resolution, so it clicks somewhere else, instead of clicking the start button.
Originally Posted by alberto3223
Help me pleaseee
evrytime i run bot all fine but it dont make its way to the boss
always stuck ,after 10 sec it stucks at some object i get some error
evrytime i run bot all fine but it dont make its way to the boss
always stuck ,after 10 sec it stucks at some object i get some error
Hey
Same problem again with EU bot2
didn't replay dungeon
Same problem again with EU bot2
didn't replay dungeon
Help me pleaseee
evrytime i run bot all fine but it dont make its way to the boss
always stuck ,after 10 sec it stucks at some object i get some error
evrytime i run bot all fine but it dont make its way to the boss
always stuck ,after 10 sec it stucks at some object i get some error
Originally Posted by alberto3223
Help me pleaseee
evrytime i run bot all fine but it dont make its way to the boss
always stuck ,after 10 sec it stucks at some object i get some error
evrytime i run bot all fine but it dont make its way to the boss
always stuck ,after 10 sec it stucks at some object i get some error
Wich dungeon?
Where do you get stuck?
How far does it work?
Do you follow all steps?
Originally Posted by Spiken
could you explain some more please?
Wich dungeon?
Where do you get stuck?
How far does it work?
Do you follow all steps?
Wich dungeon?
Where do you get stuck?
How far does it work?
Do you follow all steps?
evrything works fine
but looks like it dont know its way to the boss
it always stucks
like theres somthing wrong with cords
edit :
PreaperForCounterAttack - dungeon
Where do you get stuck?- at the start , he walks forwards and stucks at ice then he try walking to the left side but ice blocking him
How far does it work? - hacks wroks , starting dungeon and skilps boat intro but cant make its way to the boss
Do you follow all steps? - i think i did , is there anything els i need to do ecxept binding the binds at the start of ur ReadMe.txt file?
Originally Posted by alberto3223
Do you follow all steps? - i think i did , is there anything els i need to do ecxept binding the binds at the start of ur ReadMe.txt file?
Following step isn't really hard
1 - If vindictus is open, close it
2 - Open Start.exe
3 - Open Vindictus with injector
4 - Bind all
-- bind END changelevel2
-- bind f8 godmode
-- bind f9 ohk
-- bind f5 cc_set_sub_weapon javelin_lvl2 999
-- bind DEL cc_send_start_game_message
5 - Log-in and create a boat for dungeon
6 - Alt+Tab for go back on bot window
7 - Select the resolution in resolution window(Only for Eu bot2 user)
8 - Click on Start > Yes > Ok !
9 - Go back fast on vindictus and wait
But for me only two problems :
- He don't replay dungeon
- He don't use the bind for 999 javelin
Originally Posted by reshtiine
Hey
Following step isn't really hard
1 - If vindictus is open, close it
2 - Open Start.exe
3 - Open Vindictus with injector
4 - Bind all
-- bind END changelevel2
-- bind f8 godmode
-- bind f9 ohk
-- bind f5 cc_set_sub_weapon javelin_lvl2 999
-- bind DEL cc_send_start_game_message
5 - Log-in and create a boat for dungeon
6 - Alt+Tab for go back on bot window
7 - Select the resolution in resolution window(Only for Eu bot2 user)
8 - Click on Start > Yes > Ok !
9 - Go back fast on vindictus and wait
But for me only two problems :
- He don't replay dungeon
- He don't use the bind for 999 javelin
Following step isn't really hard
1 - If vindictus is open, close it
2 - Open Start.exe
3 - Open Vindictus with injector
4 - Bind all
-- bind END changelevel2
-- bind f8 godmode
-- bind f9 ohk
-- bind f5 cc_set_sub_weapon javelin_lvl2 999
-- bind DEL cc_send_start_game_message
5 - Log-in and create a boat for dungeon
6 - Alt+Tab for go back on bot window
7 - Select the resolution in resolution window(Only for Eu bot2 user)
8 - Click on Start > Yes > Ok !
9 - Go back fast on vindictus and wait
But for me only two problems :
- He don't replay dungeon
- He don't use the bind for 999 javelin
He walks and stucks at the Ice at Prepare For Counter Attack battle
then he tries to walk but the ice blocks him and after that game minimize and i got this error :
http://imageshack.us/photo/my-images/23/errorkyb.jpg/
image fixed
I have same problem, run sinject as admin inj vindictus.exe with conso.dll and vin.dll consol come but it make warning: unknow nb_ctl request 4 i ignored that put in bind "END" "changelevel2" bind "F2" "ohk" bind "F5" "cc_set_sub_weapon javelin_lvl2 999" bind "DEL" "cc_send_start_game_message" bind "F1" "god" then i go take dungen and go on boat then i run start.exe set the resolution and dungen the i hit start and go back in vindictus then it push alt i think and then go start i come to dungen it chance to boss but run wrong.
Always game guard detect and off game :/
Originally Posted by Adasieq
Always game guard detect and off game :/
What version of game ?
Do you close injector faster after vindcitus started ?
This thread is closed for replies.
