How to use hacks!
This thread requires reading, further understanding of each steps made and some analytical points.
If you can't be bothered doing any of those, get off MPGH or any other hack site before you hurt yourself. Use this tutorial as a reference only; this should be for educational purposes only.
I have felt the necessity to make this tutorial, because too many "new people" or people who are "confused" are spamming thread with comments such as "hack is detected!!11! /close" when in fact they got the 'hack tool' message. Anyway, onto the tutorial.
Before we start, you must have the specified requirements, computer administrator, an undetected injector and hack. You may not need (an) admin at certain times while running the hack, but its best if you are one/have the permission of an admin. If you don't know which requirements you need, download Dave's FIXIT.
First of all, you require an undetected injector. I am going to use a very old trainer called "PerX". You can find the injector in the attachments below. Once you've completed step one, find a hack from the hack section. For this tutorial, I'm going to use Arcton's Unique Hack Fast ! (R:19/02/13) with WinRAR, extract the hack by right clicking the archive and extract to your preferred location. In figure one, I have shown both the injector and hack together. (Figure I)
Open up the injector (PerX) as admin by right clicking (Figure II) and in the process (what to inject) type in "crossfire.exe"; click the browse button to look for the hack (in which case, I've extracted the archive in Desktop). You will simply have to go to where you have extracted the .RAR file.
Once you have located Arcton's Hacky (or the hack's name), press "Open". This is how the injector's UI should look like. (Figure 3)
You've done the "hard" part, now you have to open up CrossFire (crossfirePT_launcher) and PerX should do the job. Here's a screenshot of the results. (Results) (I would also like to point out, that if a hack or injector does manage to become detected, there's ways to extend the lifeline by using tools/m|ethod’s such as XOR Encryptions or PE Explorer etc., but I will not go into that into this tutorial. I might make a tutorial about it if I am bothered, but I'm quite sure that there’s already a tutorial about it around MPGH.)
If this tutorial helped you, Rep/Thank me. Also, please link this thread to idiots who don't know how to use hacks properly.
Thank you for reading, have a nice day.
-This tutorial was given to you by TaBz3 at MPGH.net.
Credits;
@TaBz3
@Arcton
@acornty
x1nject
Thank you, hope you have a nice time playing with hacks!
Note: Clearing "HWGC", "Log" and "XTrap" folders help to avoid with XTrap errors. Make sure you delete the Prefetch folder (or look for CF content) and restart the computer to expand the lifeline of a hack being detected (unless it's detected widely). Anyway, have a nice day/evening.
PerX injector download - http://mpgh.net/forum/169-battlefiel...-injector.html
Requirements:
Reinstall Direct X End Runtime
Download details: DirectX End-User Runtime Web Installerⓘ
Install Microsoft Visual C++ 2010 Redistributable Package
x32 | Download details: Microsoft Visual C++ 2010 Redistributable Package (x86)ⓘ
x64 | Download details: Microsoft Visual C++ 2010 Redistributable Package (x64)ⓘ
Install Microsoft Visual C++ 2008 Redistributable Package
x32 | Download Visual C++ 2008 Redistributable Package (x86) from Official Microsoft Download Centerⓘ
x64 | Download Visual C++ 2008 Redistributable Package (x64) from Official Microsoft Download Centerⓘ
Install .Net Framework 4
Download details: Microsoft .NET Framework 4 (Web Installer)ⓘ
If you can't be bothered doing any of those, get off MPGH or any other hack site before you hurt yourself. Use this tutorial as a reference only; this should be for educational purposes only.
I have felt the necessity to make this tutorial, because too many "new people" or people who are "confused" are spamming thread with comments such as "hack is detected!!11! /close" when in fact they got the 'hack tool' message. Anyway, onto the tutorial.
Before we start, you must have the specified requirements, computer administrator, an undetected injector and hack. You may not need (an) admin at certain times while running the hack, but its best if you are one/have the permission of an admin. If you don't know which requirements you need, download Dave's FIXIT.
First of all, you require an undetected injector. I am going to use a very old trainer called "PerX". You can find the injector in the attachments below. Once you've completed step one, find a hack from the hack section. For this tutorial, I'm going to use Arcton's Unique Hack Fast ! (R:19/02/13) with WinRAR, extract the hack by right clicking the archive and extract to your preferred location. In figure one, I have shown both the injector and hack together. (Figure I)
Open up the injector (PerX) as admin by right clicking (Figure II) and in the process (what to inject) type in "crossfire.exe"; click the browse button to look for the hack (in which case, I've extracted the archive in Desktop). You will simply have to go to where you have extracted the .RAR file.
Once you have located Arcton's Hacky (or the hack's name), press "Open". This is how the injector's UI should look like. (Figure 3)
You've done the "hard" part, now you have to open up CrossFire (crossfirePT_launcher) and PerX should do the job. Here's a screenshot of the results. (Results) (I would also like to point out, that if a hack or injector does manage to become detected, there's ways to extend the lifeline by using tools/m|ethod’s such as XOR Encryptions or PE Explorer etc., but I will not go into that into this tutorial. I might make a tutorial about it if I am bothered, but I'm quite sure that there’s already a tutorial about it around MPGH.)
If this tutorial helped you, Rep/Thank me. Also, please link this thread to idiots who don't know how to use hacks properly.
Thank you for reading, have a nice day.
-This tutorial was given to you by TaBz3 at MPGH.net.
Credits;
@TaBz3
@Arcton
@acornty
x1nject
Thank you, hope you have a nice time playing with hacks!
Note: Clearing "HWGC", "Log" and "XTrap" folders help to avoid with XTrap errors. Make sure you delete the Prefetch folder (or look for CF content) and restart the computer to expand the lifeline of a hack being detected (unless it's detected widely). Anyway, have a nice day/evening.
PerX injector download - http://mpgh.net/forum/169-battlefiel...-injector.html
Requirements:
Reinstall Direct X End Runtime
Download details: DirectX End-User Runtime Web Installerⓘ
Install Microsoft Visual C++ 2010 Redistributable Package
x32 | Download details: Microsoft Visual C++ 2010 Redistributable Package (x86)ⓘ
x64 | Download details: Microsoft Visual C++ 2010 Redistributable Package (x64)ⓘ
Install Microsoft Visual C++ 2008 Redistributable Package
x32 | Download Visual C++ 2008 Redistributable Package (x86) from Official Microsoft Download Centerⓘ
x64 | Download Visual C++ 2008 Redistributable Package (x64) from Official Microsoft Download Centerⓘ
Install .Net Framework 4
Download details: Microsoft .NET Framework 4 (Web Installer)ⓘ
Originally Posted by Barstarzz
