DAFUQ? [hyper 212+]

so today i got my hyper 212 plus and it took a while to installed but the problem is that my cpu temp is now higher then it was when i had my stock cooler... dafuq? my stock cooler gave me around 33c but the hyper 212+ is giving me 48c wtf is going on???? also i put a pea size thermal paste on

Originally Posted by w4ssup

.

Please work on your grammar, and it appears to be a common problem with that CPU cooler from the quick Google search I did, but you might need to check if its seated correctly and you also might want to try a different thermal paste.

nvm... restarted it and it went down... but it's the same temp as the stock fan cooler.... should it be cooler than the stock?

Originally Posted by jwgering

Please work on your grammar, and it appears to be a common problem with that CPU cooler from the quick Google search I did, but you might need to check if its seated correctly and you also might want to try a different thermal paste.

lol sorry, and what do you mean by seated?

Originally Posted by w4ssup

.

It depends on what your previous CPU cooler was, but the difference in CPU's (depending on your previous CPU cooler type) should just be that your new CPU cooler is more reliable.

Originally Posted by jwgering

It depends on what your previous CPU cooler was, but the difference in CPU's (depending on your previous CPU cooler type) should just be that your new CPU cooler is more reliable.

my previous cpu cooler is a stock cooler that came with my cpu

Originally Posted by w4ssup

my previous cpu cooler is a stock cooler that came with my cpu

Alright, well then you either need to use a different thermal paste, check its seated properly, or your stock CPU is all you needed.

Originally Posted by jwgering

Alright, well then you either need to use a different thermal paste, check its seated properly, or your stock CPU is all you needed.

still dont know what "seated" mean

Originally Posted by w4ssup

still dont know what "seated" mean

Make sure it's seated flush or square. Also all coolers will remain the same temp at idle and will never go below room temp without active cooling. Also the cooler will only ever be as effective as the rest of your cooling. The reason why you get an aftermarket cooler is because it will have lower temps during load. The idle temps are always going to be roughly the same.

Originally Posted by Doc

Make sure it's seated flush or square. Also all coolers will remain the same temp at idle and will never go below room temp without active cooling. Also the cooler will only ever be as effective as the rest of your cooling. The reason why you get an aftermarket cooler is because it will have lower temps during load. The idle temps are always going to be roughly the same.

oooo ok :P

Originally Posted by Doc

will never go below room temp without active cooling

Apparently he was expecting exothermic reactions.

DAFUQ? [hyper 212+]

Post a Reply

Similar Threads

Tags