New mouses released for US/International market (will probably hit SEA first)
I will separate this based on sensor:
http://www.bloody-usa.com/en/products.php?pid=10&id=26
Note:
-All wired mouse can go to 1000hz report rate. All wireless only 500hz. But hybrid wire/less can go to 1000hz if using wired mode.
-Metal feet increase control on cloth surface but increases glide resistance (tested on SS QCK+)
-Metal feet decreases speed on hard mouse pad (plastic) -> too little resistance for my taste (tested with Corsair MM400)
-Not recommend using metal feet on aluminum mousepad like Razer Manticor -> metal v metal= bad
-Angle snapping= disregard minor movement changes to create "straight line" effect
-Accel= cursor movement is slower or faster when you swipe mouse (not exact movement, very bad effect on muscle memory)
-Interpolation= boosting actual DPi -> result in loss of accuracy and jitter
Pixart PMW3305DK Optical 1mm lens
Traits: Acceleration free, angle snapping/smoothing (slight), trackspeed maxes at 68IPS (1.7m/s - quite low).
DPi: 3200DPi max, uninterpolated. 100DPi native steps.
V2/V3/V5/V7/V8 and R-series (wireless).
V2: Shaped like Razer copperhead/diamondback
V3 - similar to deathadder (right handed) - separated clickers from mouse chassis
V5 (?)
V7 (?)
V8 - shape is more ambidextrous compared to V7 - mirrored left and right mousefeet - uses same PCB assembly as V7
Switch: Huano Blue point - rated to 10M clicks before failure
Web (USA-EN)
R-series:
http://www.bloody-usa.com/en/products.php?pid=10&id=3
V-series:
http://www.bloody-usa.com/en/products.php?pid=10&id=2
All series adopt classic 3 mode macro selection. 1-N-3 button (2 macro profile)
Avago A3050 Optical
Traits: A bit more apparent angle snapping compared to 3305, accel(unconfirmed, probably free), maxspeed around 160IPS (4m/s)
DPi: Native max 2000, above 2000 is interpolated.
Note:
do not buy
A3050 documentation on DPi firmware.
0x01: 250 dpi
0x02: 500 dpi
0x04: 1000 dpi (default)
0x05: 1250 dpi
0x06: 1500 dpi
0x07: 1750 dpi
0x08: 2000 dpi
Use only these DPi when selecting, value outside aside from the stated above will cause sensor inaccuracy.
*possible jitter at 2000DPi
*low cost sensor, best performs at 500DPi/125Hz report rate
A9: Most similar to Deathadder. Clickers join with the chassis and sidebutton shape is more ergonomic (bigger). 1-3-N
A6: A bigger V8 + V5 mix? 1-3-N
A7: Same A6 with different light color. 1-3-N
T5: (?) - [1-N]-3-4 selector
RT5: T5 but wire/less - [1-N]-3-4 selector
T6: T5 with different chassis (smoother, no decoration) - [1-N]-3-4 selector
T7: Copy of V7, but with [1-N]-3-4 selector
A9:
http://www.bloody-usa.com/en/products.php?pid=10&id=34
A6:
http://www.bloody-usa.com/en/products.php?pid=10&id=32
A7:
http://www.bloody-usa.com/en/products.php?pid=10&id=33
T5:
http://www.bloody-usa.com/en/products.php?pid=10&id=28
T6:
http://www.bloody-usa.com/en/products.php?pid=10&id=24
T7:
http://www.bloody-usa.com/en/products.php?pid=10&id=29
Omron D2FC-F7-N (rated 20M clicks) + spring loaded clicker (faster button rebound)
Avago ADNS-9800 Optical Laser (VCSEL)
Traits: Miniscule angle snapping (less than 3305DK),
INCONSISTENT POSITIVE ACCELERATION (more noticeable on cloth pad. sensor is extremely intolerant to dust on cloth. --> recommend to ALWAYS use hard mouse pad), maxspeed 150IPS (3.8m/s).
-similar to ADNS9500 (Sensei/Raw, G9x) sensor but less angle snapping + 100DPi native step instead of 90DPi
DPi: 8200DPi native max. 100DPi native steps. No interpolation.
Note: most mouses use same chassis as A3050 but labelled "Terminator" - when you buy this sensor please use HARD MOUSE PAD (recommend Logitech G440)
TL5. [1-N]-3-4 selector
TL6. [1-N]-3-4 selector
TL7: V7 with A9800+[1-N]-3-4 selector
TL8: Bigger version of V8. [1-N]-3-4 selector
ZL5 "Sniper": Different design of button. Separate [1-N] and 3-4, different Mbutton 4/5 design, dedicated DPi shift/Sniper macro button. Has dedicated DPi switcher. Design similar to Corsair M45.
TL9: Same like ZL5 but with [1-N]-3-4 selector, normal Mbutton 4/5.
AL9: A9 with A9800 sensor, weight tuning like some X7 mouses. 1-N-3 selector
WL5 Wire/Less: RT5 with A9800.
ML16 "commander": TL9 with numeric pad on RMB
TL5:
http://www.bloody-usa.com/en/products.php?pid=10&id=30
TL6:
http://www.bloody-usa.com/en/products.php?pid=10&id=31
TL7:
http://www.bloody-usa.com/en/products.php?pid=10&id=38
TL8:
http://www.bloody-usa.com/en/products.php?pid=10&id=18
ZL5:
http://www.bloody-usa.com/en/products.php?pid=10&id=17
TL9:
http://www.bloody-usa.com/en/products.php?pid=10&id=23
AL9:
http://www.bloody-usa.com/en/products.php?pid=10&id=35
ML16:
http://www.bloody-usa.com/en/products.php?pid=10&id=20
Omron D2FC-F7-N (rated 20M clicks) + spring loaded clicker (faster button rebound)
Aaand, we still don't have a Bloody mouse with PMW3310 sensor >_>