a couple of months ago i bough parts for a pc but i never built it and a week ago ibought 2 Corsair Vengeance Pro DDR3 1600MHz 8GB
sticks and yesterday i got time to build it and when all of it was isntalled it sayd that only i had 8gb of ram and i put the ram in dimm_a1 and in dimm_a2 on asus maximus vi extreme mobo tell me what i should do
maybe one of the RAM is fried. Try putting one in. sees if it registers. Then take it out and use the other one.
Originally Posted by Alphabetic
a couple of months ago i bough parts for a pc but i never built it and a week ago ibought 2 Corsair Vengeance Pro DDR3 1600MHz 8GB
sticks and yesterday i got time to build it and when all of it was isntalled it sayd that only i had 8gb of ram and i put the ram in dimm_a1 and in dimm_a2 on asus maximus vi extreme mobo tell me what i should do
track down the problem by putting each one of the sticks inside without the other one,and if the system wont boot with one inside ...that one is probably fried
Posts 1–4 of 4 · Page 1 of 1
Post a Reply
Tags for this Thread
None
You have to put them in A1 and B1 otherwise it isn't Dual Channel.