Wall Hack/Glass Walls
Put a hook on the addresses, and it will work.
If your hook is undetected, my code is also undetected.
And basically since I didn't have enough time to code it, I used the engine glass walls, instead of hooking dip.
Made this for Brasil, it's using XignTard3 (XignCode3), they will probably signature scan this code in future.
Credits:
• Ayoub
If your hook is undetected, my code is also undetected.
And basically since I didn't have enough time to code it, I used the engine glass walls, instead of hooking dip.
Made this for Brasil, it's using XignTard3 (XignCode3), they will probably signature scan this code in future.
Code:
// Global Variables (Initialized)
DWORD dwContinue = 0;
DWORD dwAddr_WallHack = 0;
__declspec(naked) void GameHook_Walls()
{
// push 1 == off | push 0 == on
__asm
{
push 0
push 0Eh
mov eax, [eax]
}
// Continue
__asm
{
jmp dwContinue
}
}
unsigned int __stdcall HackThread(LPVOID lpParam)
{
// Get Brasil Address
dwAddr_WallHack = pBase->FindProcAddr((BYTE*)"\x6A\x01\x6A\x0E\x8B\x00\x50\x8B\x10\xFF\x92\x00\x00\x00\x00\x8B\x06", "xxxxxxxxxxx????xx"); // Only scans in "suddenattack.exe", basically the module it was injected to, injected into "x3.xem" then it will only scan in that module, etc.
dwContinue = (dwAddr_WallHack + 0x6);
// Bypass AntiCheat (Makes specific addresses editable )
pAntiCheat->StartRedirection(dwAddr_WallHack, dwContinue); // Parameters: dwStartAddr, dwEndAddr
// Make your own.
// Please notice: StartRedirection creates a new thread with a loop, this is required since the anticheat continuously scans the modules.
// Only set hook once
// Doesn't require continuous hooking.
pBase->WriteProcHook((void*)dwAddr_WallHack, (DWORD)&GameHook_Walls, 6, PAGE_EXECUTE_READWRITE);
return 0;
}
• Ayoub
Originally Posted by longkuteno3qb
