SinBotv2.3 (24 Maps)

[Zaiakunokami]

At last, the release of the full map pack of:






-- Instructions --

• WARNING: BOTTING CAN HAVE SERIOUS EFFECTS ON YOUR RANKS, AND PLACE YOU WELL INTO A HIGH RANKING POSITION FOR TIMES OR BATTLES CLEARED. THIS PUTS YOU AT A HIGHER RISK FOR BEING CAUGHT. PLEASE USE WITH CAUTION!
  
• PLEASE READ THE INCLUDED README! IT'S THERE FOR A REASON!
  
• Check the Settings.ini file for things that you may need to tweak. There is now a PieSettings.ini file that has the default Pie Binds bound to key. To use, you must rename the original Settings.ini to something else, and PieSettings.ini to Settings.ini. You also need to declare your start/pause/exit buttons, as PieBinds has things bound to each of the original default keys.
  
• You MUST start the bot on the unlaunched boat of the dungeon you wish to run.
  
• Run the x64 version for 64-bit OS, and x86 version for 32-bit OS.
  
• The default start hotkey for the bot is "Insert", default pause hotkey is "Pause/Break", and default exit hotkey is "End".

-- Information --

• I have updated the binds needed, as to kill the bosses in a more accurate manner. You will need paladin level 1 and 2 transform bound, as well as the tentacle skill for optimum performance. Will still work without, but not as well.
  
• Default settings are for 1680x1050 resolution (All resolutions are now supported!) and my custom bindings (included).
  
• Defaults are set for Speed Runs, so all extraneous features are turned off, and delays are set for pure minimum. You may need to adjust to fit your system or speed desires.
  
• This bot is programmed to work through the "GameUI_LaunchShipFail_BindTarget_Unknown" Error and "Server response delayed" errors at boat launchings as of v2.1. v2.2 Includes the ability to work through the partial battle cleared screen, and most connection time out errors.
  
• The Smart Skill Spender has a couple of requirements that you need to take into account before using. Before starting the bot, please make sure that you have at least 1 point spent in each skill you wish to level, and that you have "Trained Skills Only" checked.
  
• I know that the Rescue bot was promised, but I had a lot of issues with making it work properly. So I've taken it out and added in Pursuit and Colhen in Flames.

-- Known Issues --

• Occasionally, with lag spikes, maps will not skip properly. There is an error check in place to make the bots first retry the skipping map function and replay the boss room actions, and if that fails, it will forfeit and restart the boat in this case. If it happens continuously, tweak your betweenmap and firstmap delays.
  
• If not all battles are unlocked in a certain area, bots for that area may not work properly in the battle selection process.
  
• I have tested this bot extensively at my own settings, with my custom bindings and using x64 versions. My beta tester did notice that his computer had issues with the same bot that ran fine on my computer, due to differences in the speed of loading. All common delays are changeable in the settings.ini. If you have issues with things not starting on time, or large delays between function, please edit the timings.
  
• Maps with multiple boss rooms (Pursuit, Ruins of Sanctity) sometimes have issues getting to the boss room. If this happens, do not worry. I have multiple checks and failsafes in place to keep the bot running even if it misses the boss room. I have left both of these bots running for 6+ hours, and while not as productive as some of the others, it will finish the dungeons.

-- Future Plans --

• Incorporate a function to auto-repair equipment in town every X number of runs.
  
• Work on a sub_weapon detection system to make sure correct weapons are in place.
  
• Figure out locations and aiming measurements to break ore veins and erg pots in boss rooms that have them.

-- Problems? --

• Post a reply with any problems that you have, and I'll do my best to either help you tweak your settings for it to work, or fix the original code and re-release if it can't be tweaked through the .ini!

-- NOTE --

• My beta tester has informed me that my mouse movements to change direction that you character is facing can change with mouse sensitivity. Mine is set for 3.0, and I'm pretty sure that is the default setting so it shouldn't affect most people. But if you have a customized mouse sensitivity setting, these bots may have issues for you, especially mining bots, and Pursuit/Ruins of Sanctity.
  
• Mining bot is only tested on 1680x1050 at my default settings. Other resolutions may or may not work!

-- Thanks --

@Nicdel - God/OHK and help in implementing some features

@Hell_Demon - Public Console

@Pie - Discovering some commands and helping me locate others

@DanK - Being a master coder and helping me solve some coding issues

@gotdunkedonby - For providing an awesome logo

All of the people who gave me feedback on v2.1 and v2.2!

Re-Release of v2.303

SinBotv2.303 should fix the following issues:

Allows for automatic detection of the player screen's "black" color at start of bot, allowing for more accurate detection of errors and battle cleared screens.

Improved functionality for launching boats, including the new command to skip the boat cutscene (Default is set to {-}) to help avoid leaderboard detection, and improve speed.

Fixed Gnoll Chieftain bot to work after the addition of statue defense map.

Fixed errors within PieSettings.ini

Included DanKSole.ini and a custom config.cfg to use.

Doubled time delay between battle cleared and trying to click the replay button.

Fixed the v2.302 errors where HotKeySets were deleted accidentally, and the mis-routing of where the settings.ini file should be. All files and paths should be correct now.

I tested most of these bots personally today (my new testing character is only level 45 after selling old account and creating this yesterday), and they all appear to be working fine.

Please report any bugs to me via this thread ASAP, so I can take appropriate measure to bug-fix for v2.4

There will be no more re-releases of v2.3xx until v2.4 is available.

Virus Scan 1
Virus Scan 2

[Nico]

Amazing. Good job, approved.

[Zaiakunokami]

Amazing. Good job, approved.

You're fast this morning! Thanks!

[Shippen]

Excellent work, looking forward to setting quite a few of these up.

[ad1996]

damn lol 24 maps

[boysmu]

Okay im noob at h4x but i want to ask does the bind keys will be set auto? or i should add them

[Zaiakunokami]

Okay im noob at h4x but i want to ask does the bind keys will be set auto? or i should add them

This is not a hack, but a bot.
Downloading and using this does NOT do anything without a functional console and god/ohk injection.

You need to have your own console(or non-console) and god/ohk working before this bot will do anything.

Once you have a working method to bind keys, make sure you program the correct binds for the bot into both your console and settings.ini file.

For instance. If your "god" command is set to /, then you will need to make sure that the settings.ini has the line god= set to / as well.

[boysmu]

pie binds are default?

[Ethorion]

You sir, are truly amazing

[Zaiakunokami]

pie binds are default?

No. Please read instructions in first post.

You sir, are truly amazing

Your compliment is noted and accepted. Thanks!

[Pluto Kiss]

reso = 1050

do you by any chance made it into several resolution ??

ex: 1080 ?

[Zaiakunokami]

reso = 1050

do you by any chance made it into several resolution ??

ex: 1080 ?

All resolutions should be supported. You should no longer have to change anything in the settings.ini file for resolutions.

[maxranger]

i need help to change the ini i have setting in game 1280x1024 and the bot will just grab and attack alittle then it says that its clearing battle but im just standing in the beginning

[Zaiakunokami]

i need help to change the ini i have setting in game 1280x1024 and the bot will just grab and attack alittle then it says that its clearing battle but im just standing in the beginning

If the bot launches the boat, and then sits at the first map, occasionally trying to throw a secondary weapon or grab something and then waits for battle cleared, your settings.ini is not configured correctly and/or your console binds are not working properly. There are several instructions on how to do it included within the Readme and Settings.ini file. Please refer to these.

If you are having a different problem, please post with more details.

[Pluto Kiss]

All resolutions should be supported. You should no longer have to change anything in the settings.ini file for resolutions.

All's right with the world.

thank you very much sir !!