7sFishbot Fast Update
7s FishBot update with The new Adress This is just an update so this is not by me.
The Auto Drop of boot works if the game is on the first plan.
Sorry for my bad english im french :P
Features:
Fishing in Water/Lava/Chocolate
Auto-Drop of Boots version included
Notify pop-up when ur inventory is full (good if ure not using auto-drop of boots)
Bot configuration: change-able hotkey, different config for each bot
Bot statistics
Available to change pointers without need to update bot.
Instructions/Installation:
1. Download archive from attachment
2. Unpack archive somewhere on ur HDD
3. Launch 'My_32bit.exe' (advanced users may run 64bit version) - if u experiance problems, run 32bit one.
3 1. If its first run, configure ur bot using the gui and press "Save and Start"
4. Go to your Trove window, stand up near water, open inventory.
5. And press ur Hotkey to start (default: NumPad7)
New address: 0x00ADE99C (if Someone want for his bot
)
Screens :
Sorry for spaces you just need to remove them
Trove window:
http://se7en.com.pl/upload/397.jpg
Trove auto drop boot :
http://se7en.com.pl/upload/400.gif
Viruses Scans :
Jotti: https://virusscan.jotti.org/en-US/fi...job/8jflwy242v
Scan finished. 0/21 scanners reported malware
VirusTotal :
https://www.virustotal.com/en/file/4...b40d/analysis/
Detection Ratio: 1/55
LAST Thing :
If You want to update this bot you just need to go to your 7Fishbot.ini File (You need to have the new address too)
Replace the old address by the new if the game is uptated after my post you will need to replace this address in
Green by the new one
[Pointers]
WaterPointer="0x00ADE99C+0x144+0xe4+0x70"
LavaPointer="0x00ADE99C+0x144+0xe4+0x514"
ChocoPointer="0x00ADE99C+0x144+0xe4+0x2c0"
(Don't forget if the bot does'nt work after you updated the address this is maybe because you have wrong address)
And You're Done. Enjoy !
Ps : I will upate the address every update of the game
.
The Auto Drop of boot works if the game is on the first plan.
Sorry for my bad english im french :P
Features:
Fishing in Water/Lava/Chocolate
Auto-Drop of Boots version included
Notify pop-up when ur inventory is full (good if ure not using auto-drop of boots)
Bot configuration: change-able hotkey, different config for each bot
Bot statistics
Available to change pointers without need to update bot.
Instructions/Installation:
1. Download archive from attachment
2. Unpack archive somewhere on ur HDD
3. Launch 'My_32bit.exe' (advanced users may run 64bit version) - if u experiance problems, run 32bit one.
3 1. If its first run, configure ur bot using the gui and press "Save and Start"
4. Go to your Trove window, stand up near water, open inventory.
5. And press ur Hotkey to start (default: NumPad7)
New address: 0x00ADE99C (if Someone want for his bot
)Screens :
Sorry for spaces you just need to remove them
Trove window:
http://se7en.com.pl/upload/397.jpg
Trove auto drop boot :
http://se7en.com.pl/upload/400.gif
Viruses Scans :
Jotti: https://virusscan.jotti.org/en-US/fi...job/8jflwy242v
Scan finished. 0/21 scanners reported malware
VirusTotal :
https://www.virustotal.com/en/file/4...b40d/analysis/
Detection Ratio: 1/55
LAST Thing :
If You want to update this bot you just need to go to your 7Fishbot.ini File (You need to have the new address too)
Replace the old address by the new if the game is uptated after my post you will need to replace this address in
Green by the new one
[Pointers]
WaterPointer="0x00ADE99C+0x144+0xe4+0x70"
LavaPointer="0x00ADE99C+0x144+0xe4+0x514"
ChocoPointer="0x00ADE99C+0x144+0xe4+0x2c0"
(Don't forget if the bot does'nt work after you updated the address this is maybe because you have wrong address)
And You're Done. Enjoy !
Ps : I will upate the address every update of the game
.
Originally Posted by Urkioma
