Outdated7sFishbot Fast Update
7sFishbot Fast Update
7s FishBot update with The new Adress This is just an update so this is not by me.
The Auto Drop of boot works if the game is on the first plan.
Sorry for my bad english im french :P
Features:
Fishing in Water/Lava/Chocolate
Auto-Drop of Boots version included
Notify pop-up when ur inventory is full (good if ure not using auto-drop of boots)
Bot configuration: change-able hotkey, different config for each bot
Bot statistics
Available to change pointers without need to update bot.
Instructions/Installation:
1. Download archive from attachment
2. Unpack archive somewhere on ur HDD
3. Launch 'My_32bit.exe' (advanced users may run 64bit version) - if u experiance problems, run 32bit one.
3 1. If its first run, configure ur bot using the gui and press "Save and Start"
4. Go to your Trove window, stand up near water, open inventory.
5. And press ur Hotkey to start (default: NumPad7)
New address: 0x00ADE99C (if Someone want for his bot
)
Screens :
Sorry for spaces you just need to remove them
Trove window:
http://se7en.com.pl/upload/397.jpg
Trove auto drop boot :
http://se7en.com.pl/upload/400.gif
Viruses Scans :
Jotti: https://virusscan.jotti.org/en-US/fi...job/8jflwy242v
Scan finished. 0/21 scanners reported malware
VirusTotal :
https://www.virustotal.com/en/file/4...b40d/analysis/
Detection Ratio: 1/55
LAST Thing :
If You want to update this bot you just need to go to your 7Fishbot.ini File (You need to have the new address too)
Replace the old address by the new if the game is uptated after my post you will need to replace this address in
Green by the new one
[Pointers]
WaterPointer="0x00ADE99C+0x144+0xe4+0x70"
LavaPointer="0x00ADE99C+0x144+0xe4+0x514"
ChocoPointer="0x00ADE99C+0x144+0xe4+0x2c0"
(Don't forget if the bot does'nt work after you updated the address this is maybe because you have wrong address)
And You're Done. Enjoy !
Ps : I will upate the address every update of the game
.
The Auto Drop of boot works if the game is on the first plan.
Sorry for my bad english im french :P
Features:
Fishing in Water/Lava/Chocolate
Auto-Drop of Boots version included
Notify pop-up when ur inventory is full (good if ure not using auto-drop of boots)
Bot configuration: change-able hotkey, different config for each bot
Bot statistics
Available to change pointers without need to update bot.
Instructions/Installation:
1. Download archive from attachment
2. Unpack archive somewhere on ur HDD
3. Launch 'My_32bit.exe' (advanced users may run 64bit version) - if u experiance problems, run 32bit one.
3 1. If its first run, configure ur bot using the gui and press "Save and Start"
4. Go to your Trove window, stand up near water, open inventory.
5. And press ur Hotkey to start (default: NumPad7)
New address: 0x00ADE99C (if Someone want for his bot
)Screens :
Sorry for spaces you just need to remove them
Trove window:
http://se7en.com.pl/upload/397.jpg
Trove auto drop boot :
http://se7en.com.pl/upload/400.gif
Viruses Scans :
Jotti: https://virusscan.jotti.org/en-US/fi...job/8jflwy242v
Scan finished. 0/21 scanners reported malware
VirusTotal :
https://www.virustotal.com/en/file/4...b40d/analysis/
Detection Ratio: 1/55
LAST Thing :
If You want to update this bot you just need to go to your 7Fishbot.ini File (You need to have the new address too)
Replace the old address by the new if the game is uptated after my post you will need to replace this address in
Green by the new one
[Pointers]
WaterPointer="0x00ADE99C+0x144+0xe4+0x70"
LavaPointer="0x00ADE99C+0x144+0xe4+0x514"
ChocoPointer="0x00ADE99C+0x144+0xe4+0x2c0"
(Don't forget if the bot does'nt work after you updated the address this is maybe because you have wrong address)
And You're Done. Enjoy !
Ps : I will upate the address every update of the game
.
thank youI just need an approval and you're good !
Approved 
Thanks m8 im new to the hack editing
Good Job friend.
Hey Cyber , I'm french too ! I just want to know why the auto drop boots don't work for me ...
make a 32 bit exe plz
Originally Posted by Urkioma
Hey Cyber , I'm french too ! I just want to know why the auto drop boots don't work for me ...
Tu commence par ferme le bot (au cas ou tu l'avait ouvet)
Tu supprime ton my64bit.ini puis tu lance a nouveau ton my64bit.exe tu aura une fenetre ou tu pourra config le bot (screen : ht tp://se7en.com.pl/upload/434.jpg eleve les espaces pour l'ouvrir) Puis tu coche auto drop boots, une fois coché tu fait save.
Ensuite tu va sur trove tu le lance en Windowed tu ouvre le bot comme si tu voulait pêcher, la fenetre de ton jeu va etre réduite tu ne touche a RIEN tu ouvre juste l'inventaire et tu laisse ouvert, laisse aussi le jeu en premier plan car le bot déplace ton curseur donc si tu veut activer l'auto drop tu ne pourra pas faire autre chose pendant que ton bot pêche (exemple tu peux faire ça la nuit quand tu dort) Mon skype si tu veut : Cyberalan3
Enjoy- - - Updated - - -
Originally Posted by floowsnaake
make a 32 bit exe plz
Look at my threads in 1 or 2hours
- - - Updated - - -
32bit version is now made look at my new thread for it guys
Well, I'm running 64 bit, I just ran through what you just said, start the game (It's windowed) look at some water, hit seven on the numpad, it tells me to select the window and I click on it (Not sure if it's working). I just end up wasting lures it seems.
Fixed :P You just need To launch your bot AS ADMIN I hope i've helped some peoples. Have a nice day !
Ah voila merci , c'était pas si compliqué mais bon , merci de m'avoir aider aussi vite
So.. I'm a bit confused. I don't exactly see it working, do I start the game first or after AutoHotkey? I've pressed numb7 and nothing happened.
Oh, You need to start the game first when you're looking at the water, press the numpad 7 hotkeys (if you don't have numpad you need to change the hotkey) when you're in a message box will appear on you're screen (message : Trove window succefully selected, Lauching bot...) this mean the bot is working. when the bot throw the lure you open your inventory and let it opened. For changing the hotkey you need to delete My_64bit.ini and lanching again the file named My_64bit.exe
A setting box will appear you can now set the bot and hotkeys. If i have helped you.
Or maybe you're using the 64bit version and ur PC is 32bit version (if this is that take my 32 Bit version Here : ht tp://www .mpgh. net/forum/showthread.php?t=1013660 remove spaces to open it)
A setting box will appear you can now set the bot and hotkeys. If i have helped you.
Or maybe you're using the 64bit version and ur PC is 32bit version (if this is that take my 32 Bit version Here : ht tp://www .mpgh. net/forum/showthread.php?t=1013660 remove spaces to open it)
I found that if you dont have num lock on it doesnt work, but when i turned it on it worked perfectly! Works Windows 10 64bit
This thread is closed for replies.
