Version 1.0
initial release no logs to be seen.
Version 1.0.1
Tweaked the detection time of liquids to help detect liquid type if client lags.
Version 1.1
- With 1.1 I rewrote most of it again. Major clean up. Compare the 2 source codes and you can see what I have been threw.
- General
The way it started fishing was by adding the client to the array. It no longer is used. It now uses a active flag.
Added a way to add info for the bot for later use. I wont go in to major details in this as it is used backend mostly and for the gui when I add it.
- Error handling
Major improvement on error handling.
Those changes are as follow.
No more spam of the Error screen. *Sorry about that.*
Error screen wont pop up just because it errors once.
It now takes 3 ticks for it to pop up. 3 ticks are about 8 to 11 secs apart. That means it tried 3 times within 24 to 45secs to recast before telling the user about it.
Clicking the error gui now stops all clients that have reported errors. This is to prevent over lapping error screens.
Rewrote how error handling was buffer. No more array for it.
- Recast
Rewrote the recast to fit new format of buffer. *means no longer in its own array like error
- There might have been other changes but I can't think of any more. I will make sure to write all this down next time as I the changes.
Version 1.2
- Custom Icon, Subject to change.
- Changed the memory scan to tell if it reeling in. If so it wont trigger the whole memory scan on that client. Helps to keep cpu usage down.
- Feature Added automatic stop if bot errors out for more then 10 times in a row. So if you are not able to address the problem or not at the computer. It wont try and keep spamming lures. It disables fishing for that client off and then enables Anti-AFKflag for that client. If Flag is enabled it will keep you from disconnecting.
- Fixed if running one client the client would not show the pID on title change.
- Cleared up the unused var that I could see
- Added Anti-Afk, This you can toggled with a hotkey. If toggled on it will send Right CTRL to client to prevent being disconnected. (The default key will be NumberPad2 and CTRL+NumerPad2 for mass off)
- Change the timers on recast. This should speed things up a bit but still offer a real person feel. If you wish to speed things up just remove the randsleep at the start of the recast.
- Changed the key press delays for casting/recasting, From between 86-100 to 90-150 for a more real key press feel. You wont notice this at all. Or at lest I never did.
- Custom Icon, So you can tell the icon on taskbar.
- Fixed the stop all command. It now properly uses the fishing state flag.
- Added Main GUI mostly for info but has client controls as well, All buttons should work.
- Added Ini Setting RecastWaitTime for recast. To set pick lowest and highest number and it will randomly pick a number between. Example 190-1500 it will pick a number between the 2 values.
- And other minor tweaks here and there.
Version 1.2.1Hotfix
- Fixed a issue when spamming the hotkeys/gui buttons. It would some times set the data on the wrong client.
Version 1.2.2Hotfix
- Fixed the donate button on the GUI. It should work now my bad.
Version 1.3
- Added config for error handling. Retry times/Retry trys for auto stop and add to afk or close.
- Added Auto Close feature instead of auto afk. This can be toggled in side the new config gui.
- Added in to config. The time when the memory scan starts. Reducing this can cause more cpu usage. But will need to be lowered during events like 2x fish.
- Added config gui along with the slot selector ui used by bootdrop.
- Mew feature Bootdrop. Yep it has my version of boot drop. If someone else comes up with a better one or better idea to improve it please do share. The way it is setup is it can use any bootdrop script as long as it returns the right data back to the fishing bot.
Version 1.3.1
- Fixed a issue where sometimes the bot would stop fishing. My bad I did not notice this till I ran it over night for the frist time.
- Fixed issues with config file. People that were to lazy to delete the old one. I added error handling for default settings.
- Updated offsets.
Version 1.4
- New feature Decon along with bootdrop. If you run in to issues with this post on my thread.
- Updated pointer address to newest patch. Along new offsets for liquid type. Sorry it took so long.
- Due to a possible security risk I will no longer be changing the caption on the trove window just incase.
- Other minor changes. More to come for 1.4.1
Version 1.4.1
- Remove recast flag if you stop casting rather then just the fish flag.
- GUI window will no longer wipe its stats when you stop the bot(s).
- Added hardcoded config version. This way if you end up using the sane ini file and the config versions do not match it will delete the old one and remake it. No more Error on loading.
- Removed the wait time from behind the reelin. This is to improve speed just incase another one bites at the same time.
- Added in the ini settings a way to edit the wait time before reeling in. Random number using x-y Example 100-200 means it will randomly pick between 100 and 200 milliseconds
- Tweaked the liquid type for being Unknown. If you start to fish in unknown and then the erorr handling that scans fishing state picks it up. It will correct the liquid type.
- TypeO in the GUI Cought should have been Caught. Funny no one pointed it out.
- Rewrote how I get addresses. No need to have 6 fuctions basicly doing samething.
- Offsets are hard coded in to the ini file. If for what ever reason they break like they did last Tuesday it will be easier to update.
Version 1.4.2
- Changed the memory scan timer from 1000 to 400. This might solve a issues with missing a bite but not 100% sure.
- Added backend config MemoryScanTimer this is to change the timer at which memory is scanned. You will need to edit the ini and reload the bot. This is a backend setting.
- Fixed a bug with mass start. My bad I left some var changed around here and forgot to update them.
Version 1.4.3
Fishing Bot:
- Added a decon toggle. Meaning if you only wish for it to bootdorp only just uncheck the decon check box.
Bootdrop:
- Decon can be disabled by bot if unchecked in bot config. Only drop boots other wise. The standalone will still do both bootdrop/decon
- Updated the win resize. It will now move it to 0x0 of your screen just incase you have it offscreen.
- Added checks for windows res. This way it wont run if the res do not match up.
- Improved the empty slot detection. This I hope wont miss slots anymore. I set it up to serach for 4sets of cords for each slot. More if needed.
- Remove the Msgboxes for if the lootcollecter or bag window is not found. If they are not found it will have a tooltip and wont preform the bootdrop/decon on that client.
- BootDrop no longer looks for No box pixel or image. I will just have it click there even if it is not found.
Version 1.4.4
Fishbot:
- Added Teamviewer check. This program is known to cause issues with the fishing bot. This will warn you if it is found to be running.
- Added backend default setting to config file for Window move to 0x0. MoveWindowTo00 = 1 Means it will move to 0x0 MoveWindowTo00 = 0 Means it will use the spot it is currently in. Default is 1
- Changed default setting for bootdrop trigger on cast amount from 100 to 50. With avrage time of 25secs per cast thats around 1250Seconds which is more in line with around 20minutes.
- Changed the tooltip to traytip. This is to make it much easier to read.
- Updated default pointers as of 9/29/2015
Bootdrop:
- Added Windowed mode detection. If the game is not in windowed mode a message box will come telling them how to correct it. If it is not corrected after you hit the first ok. It will exit.
- Added bag open for bootdrop is unable to find the bag window. It will try 3 times to open it if not found by then it wont do any thing. This will only work with bootdrop not the decon sorry.
- While the bootdrop is running all keyboard/mouse input is now blocked. This way you can not interfear while it is doing its thing. IF for what ever reason you wish to stop it hit numberpad6. If bootdrop was triggered by bot it will close bootdrop. If bootdrop is ran manaul it will just reload script.
- Added backend setting for Window move to 0x0. MoveWindowTo00=1 Means it will move to 0x0 MoveWindowTo00=0 Means it will use the spot it is currently in. Default is 1
Extras:
- Encluded a new Folder Extras. This is where little scripts that I write that can help and or improve the bot and or client.
- Added build invenotry dropper. Just run it open build inv and hit F1 it will do the rest to clear it out much like the bootdrop but it hits yes.
Version 1.4.5
FishBot:
- Added when turning clients Anti-AFK on with Numpad2 it now notify the users of said action.
- Removed the mass Anti-Afk on and off toggle. I saw no need for this.
- Updated to newest pointers.
BootDrop/Decon:
- Fixed 13th slot item from detecting being empty when there was a item there.
- Added a retry if failed to send finished data back to fishing bot. It will try up to 5 times if it fails it will then just exit with a messagebox popup. But note that with out sending this data back it will not trigger boot drop on other clients.
- Added if loot collector window is not found and decon selected it will try and hit e to open it. If it is unable to be found 3 times it will move on to bootdrop. So as long as you are facing the loot collector when you start to fish it will auto open it.
Extras:
Versoin 1.4.6
FishBot:
- Fixed issue with bootdrop/decon triggering on clients that were not running the fishing bot. This should solve that issue.
- Updated liquid detection offsets.
- Updated pointers.
- Tweeked the anti afk. Its no longer a static 60secs. It is random between 60 and 300secs.
Version 1.4.6.1 HotFix
- My bad still had old pointer but offsets where updated.
Version 1.4.6.2
Updated pointers to newest ones.
Added a faster way to update pointers/offsets. You can now hit NumberPad5 to update pointers/offsets to newest ones if there updated.
Fixed the donation button yet again not for sure how I broke it this time.
With 2x fishing I turned down the scan start time from 12 to 6 for this event. It will be changed back once event is over.
Added a new splash screen logo. Hope you like it hehe.
Version 1.4.7.1
- Fixed a issue with the splash. Some times it would have the main gui under it. and some times it would not open the main gui correctly.
- Added Custom Hotkeys. It's in the config gui for that.
- Added Automagic run as admin via RunAsTask() fuction as suggested by @Quaesitum a while ago. I was tried of having to hit yes all the time during testing. Now you only need to do it once and it wont pop up again. It elevates it self by calling script by registering a scheduled task with highest privileges on the *first run of the script.
- Added Text2Speach on error handling. So you hear the error. Might see more text2speach for handling messages but as of now no. I want to make a toggle for this since not everyone would want it.
- Edit I turned down the setting for threshold retrys form 10 to 6
- Edit I turned back up the scan start time form 6 to 12 since the event is over.
- Pointer update for 12/8/2015 1:06:27 PM
Version 1.4.8.1
- Fixed a issue that would cause bot to reelin 2nd client if not fishing same liquid type.
- Added some backend stuff for debugging some things. It does not display much yet. But can be used for more backend stuff to be displayed.
Version 1.4.8
Version 1.4.9
Fishbot:
Added resizing of the client window.
Added Wensday reminder that you might need to adjust fishing start time on lauch.
Also updated autohotkey install thats in the folder.
Bootdrop:
Corrected the oldboot confirm image. I made it look for less pixels should solve the problem unless they change the font on me.