Logitech FLUX Siege Grim Sky - Anti-Recoil, CrouchSpam, RapidFire

This is my very first release of my recoil script that I have wrote for siege. I have used it for 6+ months now with no ban.
Its called FLUX. Im running it with a G502 Proteus spectrum mouse.

Before you read on,
My DPI on my mouse is 1500 with the GShift button set to 350.
My in-game sensitivity is set to 43 and my ADS is set to 75.
Ive adjusted this script to those sensitivities.

You must use this guide for your attachments if you wish to have the best functionality and results:https://www.reddit.com/r/Rainbow6/co...0_recommended/ⓘ
If you decide not to look and just jump right in, make sure to always choose the flash hider and vertical grip for maximum accuracy!

So how this script works is:
You can see notifications from withing the Logitech scripting panel
You press G8 for the Recoil mod.
You press G7 to toggle the Rapidfire mode. When this is enabled you must press and hold shift for a good second to make it stop. Its highly recommended that you untoggle it after pressing shift to stop the rapidfire script from restarting.
You press G9 for the crouch spam. When you change your crouch control settings in game to hold instead of toggle, it works better.

You can cycle thru the recoil modes by clicking the scrollwheels left and right.
Left for down, right for up.
The recoil mode starts at 2, which is what I use for 90% of guns I use.
But you can cycle it from 0 to 4.

Mode 0 = Another way of turning the script off
Mode 1 = A smaller unnoticeable jitter, for the light recoil guns
Mode 2 = My main hence why its the default
Mode 3 = For higher recoil guns such as the P90 with acog.
Mode 4 = For very High recoil weapons or you can use it in pubg with minor adjustment

The Recoil script runs only when your aiming down sights to be less suspect.

Here is a few shots of the recoil with jackals main rifle. This is with the flash hider attached and the vert grip.

Virus scan:

https://www.virustotal.com/#/file/2f...b2ad/detectionⓘ

Flux_mpgh.net.rar4 KB · 1,541 downloads Clean

Download & Thanks

//Approved

I don't know if it is because of my sensitivity, but the recoil isn't working at all for me. But the rest is great, the possibility to switch between nodes and turn everything on and of is just nice.

Originally Posted by MafiaTorte

I don't know if it is because of my sensitivity, but the recoil isn't working at all for me. But the rest is great, the possibility to switch between nodes and turn everything on and of is just nice.

@MafiaTorte
The default setting when you turn the recoil on is 2, you can check with the script terminal. On your screen if you are doing it with the default setting on just your cursor you will be unable to see it jitter. I recommend using my sensitivities I put on my mouse which I put at the top of the post. When you are using the recoil mod, make sure that you are pressing the ads button while shooting. Its designed so that if you hip fire your screen doesn't jitter like crazy. Less likely to get caught. If you are having difficulty using it, put it on 3 instead of 2. This is twice the amount of cursor adjustment but necessary on some guns. If you still feel like you cant notice it, put it on 4 with your cursor and hold both mouse buttons down in windows. If it doesnt move then something is wrong.

You should also run LGS in admin mode at all times. I notice that this solved my issue with the buttons not unbinding on the mouse for dpi and what not. Make sure that the profile is set to default and persistent, if you didnt set up the game exe location in the profile.

Also check the guide I linked above for the attachments for your weapons as this is key to getting the most accuracy.

Let me know if any of that worked and tell me what other problems you run across?

Flux v1.1 update

Notes for V1.1 Update:
- G8 now plays the lean macro, its held down to activate.
- G9 is now the rapidfire button
- G7 is the no recoil toggle
- The crouchspam macro has been removed for now, im looking for a new button to bind it to as well because I want to bring it back with the next update.
- There is a cycle lock now. Its the numlock button. If its on it will let you change modes with the scrollwheel left and right clicks. If its off then its locked as designed.
- Lots of the greentext has been removed to optimize the script
- The lean macro is best with a 3 speed op and leans left then right. Left lean is first.

Virus scan:https://www.virustotal.com/#/file/71...904d/detectionⓘ

Download for V1.1 is in attachment to this post.

Flux_v1.1_mpgh.net.rar4 KB · 373 downloads Clean

Download & Thanks

Originally Posted by shugnk

Notes for V1.1 Update:
- G8 now plays the lean macro, its held down to activate.
- G9 is now the rapidfire button
- G7 is the no recoil toggle
- The crouchspam macro has been removed for now, im looking for a new button to bind it to as well because I want to bring it back with the next update.
- There is a cycle lock now. Its the numlock button. If its on it will let you change modes with the scrollwheel left and right clicks. If its off then its locked as designed.
- Lots of the greentext has been removed to optimize the script
- The lean macro is best with a 3 speed op and leans left then right. Left lean is first.

Virus scan:https://www.virustotal.com/#/file/71...904d/detection

Download for V1.1 is in attachment to this post.

//Approved

very nice work.

How do I upload

how do I load the script. I have this mouse!

Originally Posted by cannibalgasm

how do I load the script. I have this mouse!

Go to the LGS software and click this(check image). The file should be in the rar file. Extract that and you will have the flux.xml. Locate where you put it in the LGS import dialog box. Then click on it to activate it.

Could this work with other mice example G403 Prodigy or Logitech G Pro?

Work on G602 Wireless mouse?

Hello

I wanted to ask will this work on Logitech G602 Wireless mouse.

Thanks

@WhatAPleb Yes you can change the functions in the code to achieve this. First you have to import the script. Then open the scripting panel. Notice that at the bottom of the window there is a messaging system that outputs what key on your mouse that your pressing. Press a key you wish to use as a script and it will tell you what key is being pressed currently on the mouse. For example, "event = MOUSE_BUTTON_PRESSED, arg = 1" would mean that you are pressing your left mouse button, button #1. Had it said "event = MOUSE_BUTTON_PRESSED, arg = 4", then you would be pressing the button labeled G4 on the mouse, button #4. Take note of those numbers for your extra buttons and go into the script. For whatever reason if you accidentally start the crouchspam or the rapidfire or leanspam, they will probably be spamming buttons on your mouse or keyboard. To stop this, press a key on your mouse, any key while holding the shift button down. while keeping the shift button down, press the key you pressed when you turned that script off. In the If statement there will be "arg == whatever number this script is bound to". Look for the arg numbers for the keys you pressed that you want to bind and disable what script is going to it. Use CTRL+F to use the find function. Look at the green text to find out what If statements go to what. Change the arg

question would this work for the G700s?

Originally Posted by shugnk

@WhatAPleb Yes you can change the functions in the code to achieve this. First you have to import the script. Then open the scripting panel. Notice that at the bottom of the window there is a messaging system that outputs what key on your mouse that your pressing. Press a key you wish to use as a script and it will tell you what key is being pressed currently on the mouse. For example, "event = MOUSE_BUTTON_PRESSED, arg = 1" would mean that you are pressing your left mouse button, button #1. Had it said "event = MOUSE_BUTTON_PRESSED, arg = 4", then you would be pressing the button labeled G4 on the mouse, button #4. Take note of those numbers for your extra buttons and go into the script. For whatever reason if you accidentally start the crouchspam or the rapidfire or leanspam, they will probably be spamming buttons on your mouse or keyboard. To stop this, press a key on your mouse, any key while holding the shift button down. while keeping the shift button down, press the key you pressed when you turned that script off. In the If statement there will be "arg == whatever number this script is bound to". Look for the arg numbers for the keys you pressed that you want to bind and disable what script is going to it. Use CTRL+F to use the find function. Look at the green text to find out what If statements go to what. Change the arg

@kingtiger821 yes

Flux - Quick lean and no recoil in action

Here is a video that I clipped up to show off My latest changes for flux. Let me know what you guys think! I also have more stuff coming sometime in the near future. Just testing out some ideas on macros until its ready.

Logitech FLUX Siege Grim Sky - Anti-Recoil, CrouchSpam, RapidFire

Post a Reply

Similar Threads

Tags for this Thread