How to Download→Verify→Stealth→Burn Xbox 360 Games

1.) DOWNLOAD A GAME

Before downloading a game, know what you need:
-A flashed Xbox360
-Computer Burner that can write DVD+R DL
-Empty DVD+R DL

GREAT! Now download one out of this section.

Things to check before you download!

1.) Make sure it will work in your Xbox 360's region!
Region Free Will work on any xbox360
NTSC/U used in America, Canada, Mexico
NTSC/J used in Japan and Asia
PAL is used in Europe, Australia, and Africa

2.) Can I play Wave 4 and Wave 6 games?
IF you are on iXtreme 1.5 or below, Wave3 games will not boot for you and thus Wave4 games will not either. In this case, YES you need to update your firmware!

IF you are on iXtreme 1.51 (Hitachi), then ANY wave will boot fine, including Wave4 however you must be EXTRA careful as you are not protected against corrupt or incorrect video partitions.If a game is fully verified, playing it on iXtreme 1.51 is just as safe as playing it on iXtreme 1.6 - this includes Wave4 games.

IF you are on iXtreme 1.51 (BenQ/LiteOn/Samsung), then YES you need to update your firmware! Wave 4 will not work!

IF you are on iXtreme 1.6, you can ALSO play Wave 4 and above games, however you need to use a special activation disk to do so. This was added to the firmware specifically for this eventuality - the disk activates "one-shot-boot" mode, essentially it allows iX1.6 to boot any game you insert into the drive, even if its not properly stealthed. You simply insert the disk into the drive, let it spin up (it will say "play DVD"), then swap in your Wave4 game. You will need to do this each time you want to play a Wave 4 (or above) game. Don't worry, if the game has all the necessary stealth data, then iX1.6 will still use it, so if you boot a VERIFIED Wave4 game using this method, you should be just as safe as you were booting a verified wave 3 game.

IF you are on iXtreme 1.61 or iXtreme LT you are fine and you can play Wave 4 games AND WAVE 6 GAMES without an activation disk.

*UPDATE*
iXtreme LT+ has been released. You must use this new firmware to combat AP25. This is required to boot any game from Wave 7-9.

2.) DOWNLOAD THE GAME! (continued)
Some games that I have posted will contain a bunch of links, usually from file hosting sites like M e g a u p l o a d OR r a p i d s h a r e.

If you don't feel like clicking every link, download a great program called JDownloader.
All you have to do is download the jdownloader file, open it, and JDownloader will do it for you.

3.) AFTER THE DOWNLOADS FINISH
They will most likely be packed into RAR's so if you don't have WinRar download it first.
Now you will be able to unpack all of the files you have just downloaded.
Right click the first one, left click "Extract files" and extract to your Desktop.


This should take a few minutes. Once finished, you will find two files.
DVD file and Iso File


*If you only see an ISO file simply run it through abgx360 (Step4) and it will create a DVD file for you.

4.) Use ABGX360 to check if the game is "Stealth" and "Verified"
ABGX360. You need it. Download it and install.

Now that you have the program

Go to Options and tick these settings:

RED REQUIRED

BLUE IS OPTIONAL






*CLICK LAUNCH

NOW WAIT FOR YOUR RESULTS
THESE ARE PERFECT RESULTS:



THE TWO MOST IMPORTANT THINGS ARE:
- STEALTH CHECK
- VERIFICATION

ABGX360 DOES NOT CREATE A NEW ISO FILE. WHATEVER IT MODIFIES IS STILL THAT SAME ISO FILE!

5.) Time to Burn, Almost Done!

Making sure that you have a burner that can burn DVD+R DL
And an empty DVD+R DL .








Thanks to a lot of people who I got this from:
Including;
GamerPlay of X360i.