OGC aimbot tutorial (combat arms)

i do not take credit for the creation of this aimbot

1.ogc aimbot is fairly simple, it will lock on and shoot a specified color.
first you will need to download the OGC AIMBOT

2.next you will need to go into your combat arms folder and go to the games folder, for most users this would be C:\Nexon\Combat Arms\Game

3. then you will need to move CHARS_M_BODY.rez, CHARS_M_FACE.rez, and CHARS_M_HEAD.rez to BGM. (C:\Nexon\Combat Arms\Game\BGM)

4. NOTE: YOU WILL STILL NEED A BYPASS FOR HACKSHIELD start combat arms
5. DON'T LOGIN
6. start ogc aimbot (double click the ogc aimbot in the .RAR file)
7. fill in the information in the instructions file in the .RAR file
8. login
9. pwn
10. thank me

GOOD LUCK!

EDIT: upon request heres a video to download that i made that may help
download

there is no rar file its only an exe file

post pic or video that it works? im downloading right now hope it works. Does it shoot your own teamates since they got the same chams colour?

EDIT: its not working. i download the exe enters all the info got past hackshield and nothing. please help or post pictures of how to do it properly incase im doing it wrong.

Originally Posted by darthtrex

there is no rar file its only an exe file

your downloading an .rar file, but just in case here is that info

INSTRUCTIONS:

Set the settings to the following:

Scan Range (pixels)
X:70
Y:50
Divisor:2
Deadzone:5

[X] Autoshoot Cyclic Rate (ms): 1
[ ] Burst Mode [DO NOT TICK]

Game Resolution
X:1024
Y:768

Tracking Color (RGB 0-255)
Red: 0
Green: 255
Blue: 0
Color Tolerance: 100

Refresh (1-500 ms)
set to 10

[X] Draw Tracking Lock
[X] Enhanced Target Acquisition

ok i do it all and i m trying to get a bypass ...so can u help me.? where i get a working bypass?

so i downloaded that hack or aimbot and i did all the settings that you instructed,
then when i started ca it just shot at everything where ever i aimed
are you sure you did the settings right??

Originally Posted by sweetkill

ok i do it all and i m trying to get a bypass ...so can u help me.? where i get a working bypass?

you just need to dowload the public hack which should include the hack shield bypass. then just play normally, if it works for you.

Originally Posted by darthtrex

there is no rar file its only an exe file

same only exe,
it might be because im using fire fox but i dont know

how

how do i bypass the hack sheild

works or not?

it works but u cant see the players...

Here's the VirusTotal Scan! Use at your own risk.

Code:

Antivirus  	Version  	Last Update  	Result
a-squared	4.0.0.73	2008.12.30	-
AhnLab-V3	2008.12.25.0	2008.12.30	-
AntiVir	7.9.0.45	2008.12.29	-
Authentium	5.1.0.4	2008.12.29	-
Avast	4.8.1281.0	2008.12.29	-
AVG	8.0.0.199	2008.12.29	-
BitDefender	7.2	2008.12.30	-
CAT-QuickHeal	10.00	2008.12.30	-
ClamAV	0.94.1	2008.12.30	-
Comodo	837	2008.12.29	-
DrWeb	4.44.0.09170	2008.12.30	-
eSafe	7.0.17.0	2008.12.28	Suspicious File
eTrust-Vet	31.6.6281	2008.12.29	-
Ewido	4.0	2008.12.29	-
F-Prot	4.4.4.56	2008.12.29	-
F-Secure	8.0.14470.0	2008.12.30	-
Fortinet	3.117.0.0	2008.12.30	-
GData	19	2008.12.30	-
Ikarus	T3.1.1.45.0	2008.12.30	-
K7AntiVirus	7.10.569	2008.12.29	-
Kaspersky	7.0.0.125	2008.12.30	-
McAfee	5478	2008.12.29	-
McAfee+Artemis	5478	2008.12.29	-
Microsoft	1.4205	2008.12.29	-
NOD32	3722	2008.12.29	-
Norman	5.80.02	2008.12.29	-
Panda	9.0.0.4	2008.12.29	Suspicious file
PCTools	4.4.2.0	2008.12.29	-
Prevx1	V2	2008.12.30	-
Rising	21.10.02.00	2008.12.29	-
SecureWeb-Gateway	6.7.6	2008.12.29	-
Sophos	4.37.0	2008.12.30	-
Sunbelt	3.2.1809.2	2008.12.22	-
Symantec	10	2008.12.30	-
TheHacker	6.3.1.4.201	2008.12.28	-
TrendMicro	8.700.0.1004	2008.12.29	PAK_Generic.001
VBA32	3.12.8.10	2008.12.28	-
ViRobot	2008.12.30.1539	2008.12.30	-
VirusBuster	4.5.11.0	2008.12.29	-

Download the M.P.G.H. public hack it has a bypass that works for this aimbot

Originally Posted by zdiducktape

i do not take credit for the creation of this aimbot

1.ogc aimbot is fairly simple, it will lock on and shoot a specified color.
first you will need to download the OGC AIMBOT

2.next you will need to go into your combat arms folder and go to the games folder, for most users this would be C:NexonCombat ArmsGame

3. then you will need to move CHARS_M_BODY.rez, CHARS_M_FACE.rez, and CHARS_M_HEAD.rez to BGM. (C:NexonCombat ArmsGameBGM)

4. NOTE: YOU WILL STILL NEED A BYPASS FOR HACKSHIELD start combat arms
5. DON'T LOGIN
6. start ogc aimbot (double click the ogc aimbot in the .RAR file)
7. fill in the information in the instructions file in the .RAR file
8. login
9. pwn
10. thank me

GOOD LUCK!

EDIT: upon request heres a video to download that i made that may help
[/URL]

ok i reviewed whats wrong with the tutorial, for one i put in the wrong files

ok, to fix this problem, go to C:\Nexon\Combat Arms\Game\BGM (yours may be diffrent) move the CHARS_M_BODY.rez, CHARS_M_FACE.rez, and CHARS_M_HEAD.rez files to your desktop, then go back to C:\Nexon\Combat Arms\Game (your location may be diffrent). put CHARS_M_BODY.rez, CHARS_M_FACE.rez, and CHARS_M_HEAD.rez back into your the game file,

the files your supposed to move are, CHARS_T_BODY.rez, CHARS_T_FACE.rez, CHARS_T_HAND.rez, and CHARS_T_HEAD.rez
to your bgm file, to test it, log in to combat arms, everybody you see should be pure white, or silverish in color. if they are, it's good, if it's not retrace your step until you find what you did wrong.

the second thing i did wrong is the settings. in the settings, the color's should all be set to 255, please correct your intructions file.

the third thing is that the aimbot may only be use full in ONE MAN ARMY

sorry about the mistakes.

tem algum brasileiro?
se tiver me add pra me tuliobuettel@hot...

OGC aimbot tutorial (combat arms)

Post a Reply

Similar Threads

Tags for this Thread