any ideas?

So I'm having this little project at school and I need your help with my design.

Objective:To design, build, and test an egg case that will protect a raw egg when dropped from the top of the bleachers of the football stadium.

Rules:

- Egg cases cannot exceed a volume of 3100 cm^3 (a small tissue box).
- Egg cases cannot be made out of any type of pillow, foam or bubble wrap.
- No parachutes allowed.
- Eggs must be able to be placed in the case at the beginning of class.

I was think about using a bunch if deflated balloons and some rubber bands, but

Need some ideas. Help?

1. Acquire small tissue box
2. Insert egg
3. Pack tissue box with feces
4. Feces will act as cushion for egg

I didn't go to school

Make a skeleton out of straws in the shape of a diamond (like this http://i.imgur.com/ivgnb.png), pack the inside with tissue or whatever paper/shock absorbing material you can think of that is legal. Place egg in center. Encase the outside of the straw skeleton with a cross section of cut soda bottle.

Not sure if it will work but put it in a case with cooking oil in it. Cooking oil is pretty thick so...

Originally Posted by InCognito

Not sure if it will work but put it in a case with cooking oil in it. Cooking oil is pretty thick so...

You're better off putting it in a bunch of sand. Liquids transfer waves easily.

Originally Posted by iverson954360

You're better off putting it in a bunch of sand. Liquids transfer waves easily.

Sorbothane is very good for shock absorbing

Originally Posted by InCognito

Not sure if it will work but put it in a case with cooking oil in it. Cooking oil is pretty thick so...

its gonna be dropped from the top of the bleachers, if it doesn't work it's going to be a big mess. but thanks for the idea

Originally Posted by Bernard

Sorbothane is very good for shock absorbing

I think he might run into hot water with the teacher for using stuff specifically designed for absorbing shock, whether or not it was specified in the rules. The point of this kind of experiment is design an entire system that absorbs shock, rather than relying on a specific material.

cotton can also be cushion for the egg

, inside, try to get rubber bands to suspend it in the box, u dont want the egg hitting the walls of ur case when it falls

lol'd i saw this exact same project done on modern family, the daughters idea was a container secured to some structure with 3 or 4 parachutes attached to it and it just floated down

Originally Posted by Tall kiwi

lol'd i saw this exact same project done on modern family, the daughters idea was a container secured to some structure with 3 or 4 parachutes attached to it and it just floated down

Problem is, they said no parachutes.

Hmm, non newtonian fluid might work.

Fill it with gelatine. Gelatine is liquid when its heated up, but once its cold, it is like a rubber thing. I'm sure that should work.

Originally Posted by Snake

Fill it with gelatine. Gelatine is liquid when its heated up, but once its cold, it is like a rubber thing. I'm sure that should work.

Must be able to place the egg into the system during class.

Originally Posted by iverson954360

Must be able to place the egg into the system during class.

Well yeah, just heat it up, put it in a thermo and then poor it out in the box in class, it'll become solid in no time.

any ideas?

Post a Reply

Similar Threads

Tags for this Thread