HELP THREAD(post ANY questions here)

Most helpful reply7 thanks

-Error Code Guide-

“How do i fix Error Code = -2, 10060?”
This code is Nexon’s maintenance code. Don’t worry when the maintenance is done, Combat Arms will start up like normally to the update page and your download will be started once finished, then your ready to jump right back into the action. See ya in there soon!c

“I’m getting this error: “ErrorCode= -22/30022″
Combat Arms is available to North America, South America and Australia. If you live in any other areas, you will get this error code. Don’t worry though; Combat Arms will soon be available in Europe! Check the official European website.

I’m getting this error: “ErrorCode= -21/30021″
This means that your Nexon account has not yet been verified. Check your email and follow the instructions to verify your account.
I’m getting this error: “ErrorCode= PI, 30004″
This means that your account had been blocked by the administration due to an infringement of the Terms of Use.
I’m getting this error: “ErrorCode= -40″
The installation files are corrupted. There are several reasons why this may happen.

1. Your system might be instable or an application might be interfering with the installation process. Reboot your computer and try installing the game again.
2. Your Temporary Internet files might need to be cleared.
1. For Internet Explorer users: Click on Tools, select Internet Options and click on Temporary Internet files (or “Delete…”) from the General tab. Select “Delete Files”. This may take several minutes. Once it’s done, download Combat Arms again.
2. For Firefox users: Click on Tools, select “Clear Private Data” and then click on “Clear Private Data Now”. Once it’s done, download Combat Arms again.
3. Your download manager could be corrupting the downloaded files. If you have a software that you use to manage or accelerate your downloads, we suggest that you turn it off and download Combat Arms without it.

I’m getting this error: “ErrorCode= -60/10060″
This error may result from a temporary traffic overload.

1. The servers might be congested. Wait a little bit and try again.
2. The servers might be going under maintenance. Click here to find out.
3. Your firewall or anti-virus software might be blocking Combat Arms. Make sure that they are set to allow Combat Arms.

I’m getting this error: “ErrorCode= -30/31″
These errors mean that Combat Arms is damaged and will not be able to run.Your system might be unstable. Reboot your computer and try again. If you are still receiving these errors then some game files might be corrupted.

1. Uninstall Combat Arms from the Add/Remove programs option from the control panel
2. Download Combat Arms
3. Reinstall Combat Arms

I’m getting this error: “ErrorCode= -50″
This error means that the game was unable to patch properly. The downloaded data might be corrupted.

1. Reboot your computer and try again.
2. Your Temporary Internet files might need to be cleared.
1. For Internet Explorer users: Click on Tools, select Internet Options and click on Temporary Internet files (or “Delete…”) from the General tab. Select “Delete Files”. This may take several minutes. Once it’s done, download Combat Arms again.
2. For Firefox users: Click on Tools, select “Clear Private Data” and then click on “Clear Private Data Now”. Once it’s done, download Combat Arms again.
3. Your download manager could be corrupting the downloaded files. If you have a software that you use to manage or accelerate your downloads, we suggest that you turn it off and download Combat Arms without it.

I’m getting this error: “ErrorCode= -10″
This is a temporary error. Rebooting the computer should resolve this issue.

I’m getting this error: “ErrorCode= -11″
The system is running an outdated version of DirectX. Download and install the most up to date version of DirectX

I’m getting this error: “ErrorCode= -12″
This error occurs when the executable file cannot be found. Rebooting the system should resolve this issue. If that doesn’t work, please download Combat Arms and reinstall the game.

I’m getting this error: “ErrorCode= -13″
This error can occur due to network instability or a temporary overload in traffic which results in a failure to download the program. Try rebooting the system to fix this error. If that doesn’t fix the problem, delete the Temporary Internet Files from the system

1. For Internet Explorer users: Click on Tools, select Internet Options and click on Temporary Internet files (or “Delete…”) from the General tab. Select “Delete Files”. This may take several minutes. Once it’s done, download Combat Arms again.
2. For Firefox users: Click on Tools, select “Clear Private Data” and then click on “Clear Private Data Now”. Once it’s done, download Combat Arms again

I’m getting this error: “ErrorCode= -14″
This error can occur due to network instability or a temporary overload in user traffic which results in a failure to download the program. Try rebooting the system to fix this error. If that doesn’t fix the problem, the game may be blocked by an anti-virus program or a firewall, so contact your network provider to remove the block and try again. Another option is to download Combat Arms and reinstall the game.

I’m getting this error: “ErrorCode= -20″
The game information file is corrupt and the system cannot read it. Download Combat Arms and reinstall the game.

thank me if i helped

good luck

Posts 1–15 of 1,491 · Page 1 of 100

1251100Next ›

HELP THREAD(post ANY questions here)

HELP SECTION HAS OPENED.

http://www.mpgh.net/forum/186-combat-arms-help/

Hey,

My problem: Whenever I try to open up Combat Arms, I get to the log-in screen and it just freezes.

Operating system: Vista
The hack: No Hack.

Screen shot(optional): None.

Any more information you can give: What can I do about it? It just freezes, i can't move my mouse or press log-in, or even Alt + Tab out of there to desktop, I have to turn off PC at wall.

Please Help!

Happy Hacking!

Originally Posted by bombniboy3

Has this been a recurring problem or are you just experiencing this??

try completely uninstalling Combat Arms and then re-installing. that should work

Hack wont work for me?

Ok everytime i run the hack, it fails to inject. (this is the green injector one) And when I use perx it injects but then CA shuts down. I also i did everything the hack frourms say to do. Run as admin run compatplity 2000, 95 and i also installed framework 3.0 and C++ i cant find solution

Spcifications:
os=vista

Hack=xfire and this other one just says hack well heres the pic of them

Originally Posted by tw24fr

Hmmmm.... Im having the same problem.... I think it only shuts down if u turn the colors on... once i figure it out ill tell you xD

Originally Posted by tw24fr

Well i am using the hack in the left pic. Make sure to run perx as administrator and be sure your perx is set up just like this

Run both Combat Arms and Perx as admin

i followed the thread on reducing lag, and when i did the disk-defragment and tried to play CA, the game shut down and a window popped up saying "no memory". Can anyone help?
i tried re-installing, same thing happened..

computer is xp

help when i open hacks and inject them nothing happens at login screen when i press insert

LOL you just said about how not to post your ************ and you have on your signature.!

Originally Posted by VXAGENT

LOL dint u just say not to post ur combatarms hq stuf yet there is one in ur sig XDDD woot 1st post

WOW i posted 2 seconds after you !!!!

No memory means there is not enough RAM available for the program to run. Combat Arms (Engine.exe) uses about 500mb of memory. Deschain try and stop some programs that use a lot of memory or upgrade your RAM. Gamebooster might help you there.

i will do that thanks but b4 i ran the defrag, everything worked fine and plus my comp is 2gb

Originally Posted by deschain24

i will do that thanks but b4 i ran the defrag, everything worked fine and plus my comp is 2gb

also run Disk Cleanup to clear up some more memory
Programs-Accessories-System Tools-Disk Cleanup

That should help a bit

Great job guys. This is working out great.

dunno what happened here

Your problem: How to fix disconnection
Operating system(xp or vista): Vista
The hack: http://www.mpgh.net/forum/164-combat...7-16-09-a.html

Any more information you can give: Once I get to a game, in a minute I D\C. I tried removing the CAV.exe but it still dcs