HELP THREAD(post ANY questions here)

Most helpful reply7 thanks

-Error Code Guide-

“How do i fix Error Code = -2, 10060?”
This code is Nexon’s maintenance code. Don’t worry when the maintenance is done, Combat Arms will start up like normally to the update page and your download will be started once finished, then your ready to jump right back into the action. See ya in there soon!c

“I’m getting this error: “ErrorCode= -22/30022″
Combat Arms is available to North America, South America and Australia. If you live in any other areas, you will get this error code. Don’t worry though; Combat Arms will soon be available in Europe! Check the official European website.

I’m getting this error: “ErrorCode= -21/30021″
This means that your Nexon account has not yet been verified. Check your email and follow the instructions to verify your account.
I’m getting this error: “ErrorCode= PI, 30004″
This means that your account had been blocked by the administration due to an infringement of the Terms of Use.
I’m getting this error: “ErrorCode= -40″
The installation files are corrupted. There are several reasons why this may happen.

1. Your system might be instable or an application might be interfering with the installation process. Reboot your computer and try installing the game again.
2. Your Temporary Internet files might need to be cleared.
1. For Internet Explorer users: Click on Tools, select Internet Options and click on Temporary Internet files (or “Delete…”) from the General tab. Select “Delete Files”. This may take several minutes. Once it’s done, download Combat Arms again.
2. For Firefox users: Click on Tools, select “Clear Private Data” and then click on “Clear Private Data Now”. Once it’s done, download Combat Arms again.
3. Your download manager could be corrupting the downloaded files. If you have a software that you use to manage or accelerate your downloads, we suggest that you turn it off and download Combat Arms without it.

I’m getting this error: “ErrorCode= -60/10060″
This error may result from a temporary traffic overload.

1. The servers might be congested. Wait a little bit and try again.
2. The servers might be going under maintenance. Click here to find out.
3. Your firewall or anti-virus software might be blocking Combat Arms. Make sure that they are set to allow Combat Arms.

I’m getting this error: “ErrorCode= -30/31″
These errors mean that Combat Arms is damaged and will not be able to run.Your system might be unstable. Reboot your computer and try again. If you are still receiving these errors then some game files might be corrupted.

1. Uninstall Combat Arms from the Add/Remove programs option from the control panel
2. Download Combat Arms
3. Reinstall Combat Arms

I’m getting this error: “ErrorCode= -50″
This error means that the game was unable to patch properly. The downloaded data might be corrupted.

1. Reboot your computer and try again.
2. Your Temporary Internet files might need to be cleared.
1. For Internet Explorer users: Click on Tools, select Internet Options and click on Temporary Internet files (or “Delete…”) from the General tab. Select “Delete Files”. This may take several minutes. Once it’s done, download Combat Arms again.
2. For Firefox users: Click on Tools, select “Clear Private Data” and then click on “Clear Private Data Now”. Once it’s done, download Combat Arms again.
3. Your download manager could be corrupting the downloaded files. If you have a software that you use to manage or accelerate your downloads, we suggest that you turn it off and download Combat Arms without it.

I’m getting this error: “ErrorCode= -10″
This is a temporary error. Rebooting the computer should resolve this issue.

I’m getting this error: “ErrorCode= -11″
The system is running an outdated version of DirectX. Download and install the most up to date version of DirectX

I’m getting this error: “ErrorCode= -12″
This error occurs when the executable file cannot be found. Rebooting the system should resolve this issue. If that doesn’t work, please download Combat Arms and reinstall the game.

I’m getting this error: “ErrorCode= -13″
This error can occur due to network instability or a temporary overload in traffic which results in a failure to download the program. Try rebooting the system to fix this error. If that doesn’t fix the problem, delete the Temporary Internet Files from the system

1. For Internet Explorer users: Click on Tools, select Internet Options and click on Temporary Internet files (or “Delete…”) from the General tab. Select “Delete Files”. This may take several minutes. Once it’s done, download Combat Arms again.
2. For Firefox users: Click on Tools, select “Clear Private Data” and then click on “Clear Private Data Now”. Once it’s done, download Combat Arms again

I’m getting this error: “ErrorCode= -14″
This error can occur due to network instability or a temporary overload in user traffic which results in a failure to download the program. Try rebooting the system to fix this error. If that doesn’t fix the problem, the game may be blocked by an anti-virus program or a firewall, so contact your network provider to remove the block and try again. Another option is to download Combat Arms and reinstall the game.

I’m getting this error: “ErrorCode= -20″
The game information file is corrupt and the system cannot read it. Download Combat Arms and reinstall the game.

thank me if i helped

good luck

Posts 16–30 of 1,491 · Page 2 of 100

‹ Prev12352100Next ›

Originally Posted by rangerdud105

Your problem: How to fix disconnection
Operating system(xp or vista): Vista
The hack: http://www.mpgh.net/forum/164-combat...7-16-09-a.html

Any more information you can give: Once I get to a game, in a minute I D\C. I tried removing the CAV.exe but it still dcs

Edit button next time man...

Make sure your Perx is set like this

Run both Perx and Combat Arms as Admin. Do not set anything to compatibility

Response to weaselm01 : i still disconnect.

Some other helpful information : I turn on Player Chams / Wep Chams / Full Bright

sry double post again... mpgh said i need to wait 22 sec till posting and pressed backspace and the post didnt show. So i guessed the first post didn't registed and decided to post again

Originally Posted by rangerdud105

sry double post again... mpgh said i need to wait 22 sec till posting and pressed backspace and the post didnt show.

Rename the TNT Hack.dll to something else. like Skype

make sure your D3D9.dll, TNT Hack.dll and Perx are all in the same folder...my folder is named Waffles =)

Originally Posted by weaselm01

Rename the TNT Hack.dll to something else. like Skype

make sure your D3D9.dll, TNT Hack.dll and Perx are all in the same folder...my folder is named Waffles =)

ahh it was the folder's name.... right now it isn't disconnecting. thanks

mwahaha rep

ok well...
the hack is that chocolate.dll hack and its bypass.
i inject it both with perx and then combat arms d/c's me any ideas is this happening to you?

Originally Posted by bigblob5

ok well...
the hack is that chocolate.dll hack and its bypass.
i inject it both with perx and then combat arms d/c's me any ideas is this happening to you?

I haven't messed with the speed hack...so will someone else help this person.

But i heard the bypass for this hack has been patched or w/e...search for another bypass within these forums, and try that bypass

i still have a problem..even after dl gamebooster, doin disk cleanup, CA still closes and window says "out of memory"

Originally Posted by Obama

You may have a virus that is taking up allot of memory that you don't know about, Do a full system scan with windows live one care "best antivirus" "free 3 month trial" get rid of the virus and see were that gets you.

you saw the same site i did Obama... i was just about to post that -.- lol

Deleting cookies form your hard drive will also help free up some memory.

I would suggest downloading CCleaner..it is a free software that cleans up cookies for you in a matter of minutes...Just google CCleaner

Or download Advanced SystemCare Free v3 another free computer cleaner. This makes your computer run a lot better and it's 10x better than CCleaner... This is from the same makers as Gamebooster...thanx to whitten001 for posting this

PerX now refuses to open for me.
I have not downloaded anything in a while (2 days, so looong) so it is most likely not a virus.
Every time I open it, it opens for a quick second (OMG HOPE) but then it closes. Any idea why?

Originally Posted by MetalLuigiX

Open up your task Manager (ctrl alt del)

And end the process there called Engine.exe

Perx sees this as open and injects the .dlls and closes

Right click on Engine.exe and End Process

Working cham not working

Your problem: The Hack dont work Working Chams 7-16-09
Operating system(xp or vista): Vista ultimate
The hack:Working Chams 7-16-09
screen shot(optional):

Any more information you can give: can see anything when i inject it nothing happends but other hacks work

Untitled.jpgattachment deleted · 116 downloads before removal

Your problem: Disconnect
Operating system(xp or vista): Vista 64 bit

The hack:
http://www.mpgh.net/forum/164-combat...7-16-09-a.html

screen shot(optional): None
Any more information you can give:
The hack worked for me earlier today but now i Disconnect about 2 mins after logging in. I have time to join a game and kill one person. An update maybe?

Originally Posted by gaving

Originally Posted by Dreth

I posted on this thread a few things to try to get this hack running....Please read the posts and tell me if this fixes yall's problem

Will both of yall try this

Rename the TNT Hack.dll to something else, like Skype

Make sure your D3D9.dll, TNT Hack.dll and Perx are all in the same folder...RENAME the folder, my folder is named Waffles =)