Home › Forum › MultiPlayer Game Hacks & Cheats › BattleOn Games Hacks, Cheats & Trainers › Adventure Quest Worlds (AQW) Hacks / Cheats / Trainers › Adventure Quest Worlds (AQW) Tutorials, Source Code & Coding › Learn Reading Packet Spammer & Packet Tamperer
Learn Reading Packet Spammer & Packet Tamperer
Learn Reading Packet Spammer & Packet Tamperer
Hi everyone 
, im here to ask about how to Learn reading the packet tamperer and using it on packet spammer 
I already learn about the packet tamperer that can read the server message and the client. Whenever i tried to send the packet again as the packet from server i got, it wont work , and sometime, i read the packet tamperer , move it to notepad+ and i tried to read them, then i get, the ID item, MonID, etc. I think that must be usefull for the packet spammer, so i tried to make a packet spammer by myself, with looking the packet spammer that already made by anybodty else out there, i tried to configure it out with my packet spammer, i think there is a command to packet spammer likes ,
1. DropItems
2. GetQuest
3. AcceptQuest
etc. ( I dont know a lot da hehe )
But i sure this mean a lot, and the packet should be like this %xt%zm%(Command)%MapId%IdQuest%
AM i correct? if no please tell me how to make packet spammer by my own, and how to use packet spammer, how to create a packet spammer.
I NEED A TEACHER BRUH
, im here to ask about how to Learn reading the packet tamperer and using it on packet spammer I already learn about the packet tamperer that can read the server message and the client. Whenever i tried to send the packet again as the packet from server i got, it wont work , and sometime, i read the packet tamperer , move it to notepad+ and i tried to read them, then i get, the ID item, MonID, etc. I think that must be usefull for the packet spammer, so i tried to make a packet spammer by myself, with looking the packet spammer that already made by anybodty else out there, i tried to configure it out with my packet spammer, i think there is a command to packet spammer likes ,
1. DropItems
2. GetQuest
3. AcceptQuest
etc. ( I dont know a lot da hehe )
But i sure this mean a lot, and the packet should be like this %xt%zm%(Command)%MapId%IdQuest%
AM i correct? if no please tell me how to make packet spammer by my own, and how to use packet spammer, how to create a packet spammer.
I NEED A TEACHER BRUH
*PS: Im using Grimoire 3.8+
The format of packet code depends on what function it will do. For example, "%xt%zm%gar%1%26%a1>m:6,aa.m:7%wvz%" will be sent to server (by the client) when you do any kind of skills to the monster wheter if it's auto attack or skill.
Another example of packet is Cell Jump. Ex. :%xt%zm%moveToCell%74189%Enter%Spawn%. Unlike skill's packet format, this is a bit easy to understand. The "74189" is some sort of user id which normally change everytime you log in (or any other cases).
Originally Posted by Blacklotus007
No, you can't make your own packet code (invent a new one that cannot be recognize by the server) but you can change the values of some packets that can be recognize by the server. Ex: I'm at citadel and I want to go directly to the portal without any hassle of clicking, but sad to say I don't have the packet for that but I have a spare packet in Enter (%xt%zm%moveToCell%74189%Enter%Spawn%). So what will I do is change the "Enter" to m22 (because that's where the portal is) and change the "Spawn" pad to "Left" in order for me not to get stucked in the middle. I can either use packet spammer (in grimoire and rbot) and send the packet code once OR I can use packet tamperer (packet interceptor in rbot) to send the packet code to server.
The rule will apply to every packets but in different format.
Originally Posted by Blacklotus007
Originally Posted by Blacklotus007
Packet Spammer's function comes from the word itself, spammer. It basically sends packet in the server multiple times (or until you stop) with a delay to avoid being disconnected or getting banned (in the worse case). One of the best uses of it is in fishing. I already made a tutorial of it (My started thread here) on how to use it maybe in that way, you'll get an idea on how to use packet spammer.
Another example of packet is Cell Jump. Ex. :%xt%zm%moveToCell%74189%Enter%Spawn%. Unlike skill's packet format, this is a bit easy to understand. The "74189" is some sort of user id which normally change everytime you log in (or any other cases).
Originally Posted by Blacklotus007
how to make packet spammer by my own
The rule will apply to every packets but in different format.
Originally Posted by Blacklotus007
how to use packet spammer
Originally Posted by Blacklotus007
how to create a packet spammer.
Use the packet logger instead of packet tamperer. It's the easiest way.
Originally Posted by NoobFloob
The format of packet code depends on what function it will do. For example, "%xt%zm%gar%1%26%a1>m:6,aa.m:7%wvz%" will be sent to server (by the client) when you do any kind of skills to the monster wheter if it's auto attack or skill.
Another example of packet is Cell Jump. Ex. :%xt%zm%moveToCell%74189%Enter%Spawn%. Unlike skill's packet format, this is a bit easy to understand. The "74189" is some sort of user id which normally change everytime you log in (or any other cases).
No, you can't make your own packet code (invent a new one that cannot be recognize by the server) but you can change the values of some packets that can be recognize by the server. Ex: I'm at citadel and I want to go directly to the portal without any hassle of clicking, but sad to say I don't have the packet for that but I have a spare packet in Enter (%xt%zm%moveToCell%74189%Enter%Spawn%). So what will I do is change the "Enter" to m22 (because that's where the portal is) and change the "Spawn" pad to "Left" in order for me not to get stucked in the middle. I can either use packet spammer (in grimoire and rbot) and send the packet code once OR I can use packet tamperer (packet interceptor in rbot) to send the packet code to server.
The rule will apply to every packets but in different format.
Packet Spammer's function comes from the word itself, spammer. It basically sends packet in the server multiple times (or until you stop) with a delay to avoid being disconnected or getting banned (in the worse case). One of the best uses of it is in fishing. I already made a tutorial of it (My started thread here) on how to use it maybe in that way, you'll get an idea on how to use packet spammer.
Another example of packet is Cell Jump. Ex. :%xt%zm%moveToCell%74189%Enter%Spawn%. Unlike skill's packet format, this is a bit easy to understand. The "74189" is some sort of user id which normally change everytime you log in (or any other cases).
No, you can't make your own packet code (invent a new one that cannot be recognize by the server) but you can change the values of some packets that can be recognize by the server. Ex: I'm at citadel and I want to go directly to the portal without any hassle of clicking, but sad to say I don't have the packet for that but I have a spare packet in Enter (%xt%zm%moveToCell%74189%Enter%Spawn%). So what will I do is change the "Enter" to m22 (because that's where the portal is) and change the "Spawn" pad to "Left" in order for me not to get stucked in the middle. I can either use packet spammer (in grimoire and rbot) and send the packet code once OR I can use packet tamperer (packet interceptor in rbot) to send the packet code to server.
The rule will apply to every packets but in different format.
Packet Spammer's function comes from the word itself, spammer. It basically sends packet in the server multiple times (or until you stop) with a delay to avoid being disconnected or getting banned (in the worse case). One of the best uses of it is in fishing. I already made a tutorial of it (My started thread here) on how to use it maybe in that way, you'll get an idea on how to use packet spammer.
nice info !
yeah i dont mean to make my "own" packet spammer, its like, i make the code to share to other's or just for my self consumption. etherwise, i wanna ask, i got the Hedgemaze Packet spammer , and the packet was written like this
%xt%zm%acceptQuest%20135%5301%
%xt%zm%getMapItem%20135%4680%
%xt%zm%tryQuestComplete%20135%5301%-1%false%wvz%
which the "AcceptQuest" is the command , and i dont know what the code next, but i know that 5301 is the idQuest
and also that getMapitem. is that 20135 a MAP ID ? or what ? because only that code make me wonder, what is that code means.
i really apreciate your comment dude, i really need a guru
- - - Updated - - -
Originally Posted by Biyaaay
Use the packet logger instead of packet tamperer. It's the easiest way.
Originally Posted by Blacklotus007
which the "AcceptQuest" is the command , and i dont know what the code next, but i know that 5301 is the idQuest
and also that getMapitem. is that 20135 a MAP ID ? or what ? because only that code make me wonder, what is that code means.
and also that getMapitem. is that 20135 a MAP ID ? or what ? because only that code make me wonder, what is that code means.
Originally Posted by Blacklotus007
i just try the Packet logger on Rbot
Also, grimoire is extremely different to Rbot. Rbot requires a bit of knowledge about C# (which is what I see as microsoft java) in order to make a script, unlike grimoire where you can just click some buttons then save.
well, wut do u want to do with that ?
u could DM me, i'll explain in Indonesian for u
u could DM me, i'll explain in Indonesian for u
Originally Posted by NoobFloob
That's also some sort of temporary user id which changes everytime you login. You can put any five digit numbers in that and no error will happen. Maybe it is added for debugging purposes or idunno.
Also, grimoire is extremely different to Rbot. Rbot requires a bit of knowledge about C# (which is what I see as microsoft java) in order to make a script, unlike grimoire where you can just click some buttons then save.
Also, grimoire is extremely different to Rbot. Rbot requires a bit of knowledge about C# (which is what I see as microsoft java) in order to make a script, unlike grimoire where you can just click some buttons then save.
%xt%zm%getMapItem%20135%4680% where the 4680 is the ID TempItem, but when i sniff that with packet sniffer, that not match with the sniffer database, so any idea? why the ItemIDTemporary sniffer is different? or what?
#Sorry for my bad explain in english
Originally Posted by NoobFloob
here's also a grimoire version which is called packet sniffer. Both of them do the same function.
Yeahh i just knew that bruh, grimoire have packet sniffer.
Similar Threads
- 10Last post
- Aqw SkyGuard Hair Packet SpammerBy justz45 in Adventure Quest Worlds (AQW) Hacks / Cheats / Trainers3Last post
- Aqw SkyGuard Hair Packet SpammerBy justz45 in Adventure Quest Worlds (AQW) Hacks / Cheats / Trainers26Last post
- Packet Spammer (Le Bot 5.4)By [CA]TheSeller in Adventure Quest Worlds (AQW) Hacks / Cheats / Trainers7Last post
- IS THERE A CLASS PACKET SPAMMER???By danialhaziq99 in Adventure Quest Worlds (AQW) Hacks / Cheats / Trainers3Last post