[Detected] SinBotv2.4 Public Version! - Page 40 - MPGH

Originally Posted by Tsukasa-san

Nope, it doesn't. Tried it. Gets stuck on the Battle Result screen.

Donated to Zaia on Saturday. Still haven't received a reply. Would love to just edit the source a bit to make it work on the EU servers...

You'd have to know how to do pixel checking to edit the part that it's getting stuck on.

@No_limitz134
The AP spender requires you to have put at least 1 point into the skill, then check off the "ONLY SHOW TRAINED SKILLS" checkbox in the skills menu.( had you read the help documentation and readme you'd have known that.)

@convolution On the sixth battle, I'm assuming this was the exact scenario:
1. Start perx, inject into vindictus either manually or auto w/e.
2. Log in, select toon, go to town, go to boat, get on boat
3. Start sinbot, configure it, hit the start button tooltip shows up stating to hit Insert to start it.
4. Go back in game, press Insert, it starts, then goes through first five boats fine...
5. Something screws up on the sixth boat..

Did you watch the bot to see what it was doing that was abnormal? Sometimes it could be performing an action that is out of the loop of normality because of the stuck prompt (which we're going to disable in the next release (BOOYAH!)
But it may very well be other things.
Please tell me exactly WHERE the bot began to malfunction within the sixth run, and what was on screen when it happened.
Thanks,
Dracconus

@Dracconus You are correct, sir! I had it opened in notepad and didn't scroll over. Thank you for your assistance.

Originally Posted by No_limitz134

@Dracconus You are correct, sir! I had it opened in notepad and didn't scroll over. Thank you for your assistance.

hehe, not a problem. Also, in notepad, go to tools, and set wordwarp on, or use notepad ++ as it has it automatically built in, and is better in every coder's opinion

When i use my bot everything works fine until it gets to boss stage, then all my character does is spam paladin skill and throw spears.....does anyone know how i would fix this?

Originally Posted by gumer619

When i use my bot everything works fine until it gets to boss stage, then all my character does is spam paladin skill and throw spears.....does anyone know how i would fix this?

@gmer619 You need to adjust the skip map function to be longer, and also the boss timer.

Originally Posted by Dracconus

@gmer619 You need to adjust the skip map function to be longer, and also the boss timer.

ooooohh ok thx

Just wanted to drop in and say good job so far, and good luck with the merger and future versions. I had the chance to use the bot for a couple days before my desktop's mobo went out of commission, and really liked it. Whenever I get my hands on a replacement, which might take a while, I may just as well dish out a few more bucks for the donators' version.

Until then, I'll be lurking around here to keep updated with your progress.

Originally Posted by bokbok

Just wanted to drop in and say good job so far, and good luck with the merger and future versions. I had the chance to use the bot for a couple days before my desktop's mobo went out of commission, and really liked it. Whenever I get my hands on a replacement, which might take a while, I may just as well dish out a few more bucks for the donators' version.

Until then, I'll be lurking around here to keep updated with your progress.

Yeahhh...about that...Finally got my pc setup again today, and low and behold I decided to be a dumbass, and start testing out some of my old hard drives, and ran across one a friend of mine and I loaded a shit ton of diff viruses we were testing onto. Decided that I'd test out some of the files, and well...common sense tells you the rest...SO
1. Learned not to fuck with that drive, and labelled it with a biohazard sign, and warning (sharpies FTW)
2. Don't test files that are named weird things :P
3. Got some of the basics setup today, and am going to spend tomorrow setting up everything else that I need.

Sorry AGAIN for the delay, that was totally my fault for being a jackass :P
BUT, at least I didn't have everything completely set up, THEN do that.
LOL

Also, depending on where you live, I've got an AM3 Socket motherboard that's got 4 ddr3 ram slots (it's from an old HP computer.) and has hd 4200 series graphics embedded. check it out on hp's support site if you have AM3 processor.
It's a piece of shit basic 'ol foxconn mobo from an HP P6710F model, but if you can use it, and live relatively close I can send it to ya for the price of shipping (shouldn't be too much if you're close to Dallas Texas (I know to Pennsylvania it'd cost about 20 bucks from here ([to give an estimate])

Originally Posted by Dracconus

Also, depending on where you live, I've got an AM3 Socket motherboard that's got 4 ddr3 ram slots (it's from an old HP computer.) and has hd 4200 series graphics embedded. check it out on hp's support site if you have AM3 processor.
It's a piece of shit basic 'ol foxconn mobo from an HP P6710F model, but if you can use it, and live relatively close I can send it to ya for the price of shipping (shouldn't be too much if you're close to Dallas Texas (I know to Pennsylvania it'd cost about 20 bucks from here ([to give an estimate])

I'm running an Intel, unfortunately. Thanks for the offer though, it's very kind of you.

Originally Posted by Dracconus

Yeahhh...about that...Finally got my pc setup again today, and low and behold I decided to be a dumbass, and start testing out some of my old hard drives, and ran across one a friend of mine and I loaded a shit ton of diff viruses we were testing onto. Decided that I'd test out some of the files, and well...common sense tells you the rest...SO
1. Learned not to fuck with that drive, and labelled it with a biohazard sign, and warning (sharpies FTW)
2. Don't test files that are named weird things :P
3. Got some of the basics setup today, and am going to spend tomorrow setting up everything else that I need.

Sorry AGAIN for the delay, that was totally my fault for being a jackass :P
BUT, at least I didn't have everything completely set up, THEN do that.
LOL

Also, depending on where you live, I've got an AM3 Socket motherboard that's got 4 ddr3 ram slots (it's from an old HP computer.) and has hd 4200 series graphics embedded. check it out on hp's support site if you have AM3 processor.
It's a piece of shit basic 'ol foxconn mobo from an HP P6710F model, but if you can use it, and live relatively close I can send it to ya for the price of shipping (shouldn't be too much if you're close to Dallas Texas (I know to Pennsylvania it'd cost about 20 bucks from here ([to give an estimate])

ya lol ive made the same mistake aswell its a good sign not to fuck with files called {FGWG1241GSDGS-3463GS} when there compared with files like....adobe, and better to just delete them or isolate.

@Dracconus Do you have any idea when Zaia will be back or at least reply to his emails? I donated last Saturday, but still haven't received any reply...

how to disible auto use AP. i wan't use by myself.

Originally Posted by sP34ND

how to disible auto use AP. i wan't use by myself.

go into the options and uncheck it...
That could have been answered by uhm...using common sense :P

Also, no, I hav eno idea when Zaia's going to be back unfortunately. I've set up an FTP for us to transfer the incomplete file versions back and forth to each other with revision logging, and such methods to prevent accidental "issues" from being created, and later today, after I get some sleep (much needed as it's 5am here) I'm going to begin working on getting some of the timers set up for the maps that don't skip straight to boss.

NOTICE TO ALL DONATORS!!!

¤To those that are going to donate from here on in...
Please use the donate button that's in my signature so that I can verify the donations.
They are going to the new merger SinBot Paypal that I've created, and hav emyself, and Zaiakunokami on.
This will enable me to verify the donations, and get you set up with the Current Donator version.

¤To anyone else that has donated, please send an email to SinBot@.hot mail.com containing the payment information including transaction ID, your Email, the Email you sent payment to, amount, etc. So that I can start verifying those through spam texting Zaiakunokami

¤ Concerning the merger - Today I'm going to begin installing all my programs. There are probably around 100 that I have to install, so it's definitely going to take at least all day to get these set up.
Once I do I'm going to begin working on the SinBot Website which will containing a F.A.Q Page, an assistance form (so that you don't have to create new threads, or posts here at MPGH), and some other tools.
The contact page will create a new entry into a mysql database so that we can verify donations, and when you donate to the new Paypal, it will text us.
This will help things get taken care of when we don't quite have the time to be on here, checking our emails.

After I finish that, I'm going to begin working on the path setups for the bot, and also work on the new DankSole at the same time.
Due to Zaiakunokami handling some of the more technical aspects of the bot, I will have to wait on him to implement some of the other changes BUT if I get impatient, and have the free time then I might just code the stuff I need to test it myself, and issue that out to some beta testers.
Thanks, and sorry for any troubles you're having. Hopefully this new system will prove itself to be worth the wait.

thank you for looking into this dracconus.

I will most likely send my email with the information later today.

DetectedSinBotv2.4 Public Version!

Similar Threads