[Detected] SinBotv2.4 Public Version! - Page 72 - MPGH

Originally Posted by Spectre88

This is to Dracconus.

I donated through the link in the SinBot program itself, and I sent the confirmation to the e-mail provided by the creator, but it occurred to me now that the info is probably outdated. The donate button on this thread and the one in your signature both lead to a different e-mail address than the one in the program. I was just wondering what exactly I should do to receive the donator version. Do I need to donate again or can I just send you the confirmation e-mail that pay-pal sent to me?

Thanks, appreciate it.

Unfortunately due to Zaiakunokami's disappearance you're not the only one that has had this issue.
At first it was (somewhat) easy for me to get those working for people, but as of late it's become impossible to get a hold of him to verify the donations that go through to him.
It's for this reason, and the fact that I'm the new production designer for SinBot that I created the sinbot@.hotmail donation link to verify donations myself.
There's nothing that I can do really, besides tell you to try to dispute the transaction with paypal, and re-donate if you wish, other than that it's just an option of waiting on Zaiakunokami to come on, and verify it, but seeing as he has no computer at the moment...that may be a VERY long wait.

Thanks for the quick reply.

I will just go ahead and donate to the new link, no harm done.

Originally Posted by Dracconus

Those have nothing to do with Sinbot, you need to ask those questions in their respective thread.

@liwing It would be in your best interest to read a few posts above you, as I told you the answer you need when responding underneath you last time you asked it

If you guys keep not reading I'm going to stop responding.
It's not that difficult of a process to read and see if a reply has been written to you. If this continues I'll just completely stop supporting the bot...donations, questions, and releases will cease. So unless you WANT that to happen, I suggest that you start making the same amount of effort that I'm putting into solving your issues to try and solve them yourself, and read responses that are written to you.

I've read that... and adjusting maps delay has nothing to do with it,besides i adjusted that since the beginning. As i told ,it does conviction,etc but it doesnt walk, never

@liwing
Why are you acting like the bot changes per computer that it's on?
It's written out VERY simple...The functions don't CHANGE unless YOU change them.

See...

Code:

		Send("{A DOWN}")
		Sleep(1500)
		Send("{A UP}")
		Sleep(50)
		Send("{W DOWN}")
		Sleep(12500)
		Send("{W UP}")
		Sleep(500)
		Send("{ESC}")
		Sleep(500)
		Send("{ESC}")
		Sleep(500)
		Send("{ESC}")
		Sleep(500)
		Send("{ESC}")
		Sleep(500)
		Send("{ESC}")

Taking from the Taking Initiative re-work that I just did in the spear function for another user that's having issues with the speed bullshit.
The bot is not going to do ANYTHING that it wasn't coded to do. it's not some highly evolved advanced multi-cell organism that has the ability to control itself depending on variables that aren't instanced in it's coding.

If your bot is not walking then it's because simply put, it's doing it while you're loading, or it wasn't meant to walk. So keep on adjusting those timers, and eventually you'll find it.

I found the answer to some problems, I needed to use admin for the game exe, I needed to change some timers, and some things had to be changed. But now the only thing I have problem is the running itself of the bot. It says that if the bot does not run far enough make sure the command is in. It is in, but it does not reach Example: Gnoll Chieftain and doesn't descend down the stairs. It starts using the ohk and godmode at the stairs, doing so until it goes to checking for boat clear. Am I missing something in the command prompt? Or do I need to adjust a timer?
Sry for getting on your nerves Dracconus, I am new, and I didn't understand the tutorial completely, so I thought asking questions may help. Maybe too many questions.

Originally Posted by hellferno

I found the answer to some problems, I needed to use admin for the game exe, I needed to change some timers, and some things had to be changed. But now the only thing I have problem is the running itself of the bot. It says that if the bot does not run far enough make sure the command is in. It is in, but it does not reach Example: Gnoll Chieftain and doesn't descend down the stairs. It starts using the ohk and godmode at the stairs, doing so until it goes to checking for boat clear. Am I missing something in the command prompt? Or do I need to adjust a timer?
Sry for getting on your nerves Dracconus, I am new, and I didn't understand the tutorial completely, so I thought asking questions may help. Maybe too many questions.

When you see it walk and move does the speed look fast? As in is it activating the speed part of the hack?

I had this problem to where some places it would not go far enough and so could not finish. I fixed this with lil info I found on forums and a little thinking myself. Now even when the speed hack is active with the bot moving there a few maps only few that are a lil off course which I think (could be wrong) is because The speed hack used to be faster before it was patched.
Check your README does your Speed hack text read incrementvar host_timescale 1 3 2?

When I started the bot, it started the boat but when the map loads up my char starts throwing spears randomly at the wall.
Help?

Originally Posted by rocklee953

When I started the bot, it started the boat but when the map loads up my char starts throwing spears randomly at the wall.
Help?

Have you adjusted the delays at all? Default Delays are pretty low I think so if your computer isn't great or if your settings are not in a descent place for your comp your gonna run into a few problems. Count how many seconds you need between load screens and then add 1-3 seconds more on top of that. This is just what I'm thinking this problem is I could be way wrong

yes it does say that actually, is that good or bad? And actually its running at normal speed. The speed isn't increasing or decreasing and the commands are correct. Since I copied and pasted like it said, although it does show an error like warning every so often.

Originally Posted by hellferno

yes it does say that actually, is that good or bad? And actually its running at normal speed. The speed isn't increasing or decreasing and the commands are correct. Since I copied and pasted like it said, although it does show an error like warning every so often.

Gonna save you a lil trouble Just copy and paste this in your Readme and make a damn back up of it before you do it. ALSO Delete your other Host_timescale Command line as to not confuse the 2. Combine 2 into 1 with this line
bind "KP_MINUS" "ohk;incrementvar host_timescale 1 3 2"

This is how I fixed it I combined OHK with Host time scale since it activates OHK in boss room right at the entrance. Also This may not be a recommended fix this is why you should back up your Readme file

Originally Posted by Santi22

Gonna save you a lil trouble Just copy and paste this in your Readme and make a damn back up of it before you do it. ALSO Delete your other Host_timescale Command line as to not confuse the 2. Combine 2 into 1 with this line
bind "KP_MINUS" "ohk;incrementvar host_timescale 1 3 2"

This is how I fixed it I combined OHK with Host time scale since it activates OHK in boss room right at the entrance. Also This may not be a recommended fix this is why you should back up your Readme file

You this sort of thing should have occurred to me right away, but it didn't. Smart thinking.

Originally Posted by Santi22

Gonna save you a lil trouble Just copy and paste this in your Readme and make a damn back up of it before you do it. ALSO Delete your other Host_timescale Command line as to not confuse the 2. Combine 2 into 1 with this line
bind "KP_MINUS" "ohk;incrementvar host_timescale 1 3 2"

This is how I fixed it I combined OHK with Host time scale since it activates OHK in boss room right at the entrance. Also This may not be a recommended fix this is why you should back up your Readme file

When you say combine 2 into 1, which 2 lines are you referring to?

when i go decisive map thingy. i just walk a little bit no where near the monsters and attack.

Originally Posted by Yucong

when i go decisive map thingy. i just walk a little bit no where near the monsters and attack.

read up a few post I just went over this with some one else. Sounds like you have the same problem

He's talking about the two lines (after the one that you add) that say "host_timescale" in them.
And, yeah, that fix is going to have to work for now. Had to do a preventative system restore last night on my drive and WINDOWS LIED SAYING THAT MY DOCUMENTS WOULDN'T GET LOST.

Tried reversing it and it still didn't come back so it's lost somewhere...so that means I've gotta REDO all the work that I've done recently...fucking yippee...that's alright tho. I'm going to start working on it FIRST THING monday, and the new version will be up within the same day with a few fixes to get things going nice and smooth again.
I know, I know, monday's a ways away, but tomorrow I'm going to be at the hospital all day with my wife to find out the gender of the baby (second time now...first time the lady was a moron, so I requested another appointment.) then I have to get a shitload of shopping done since the in-laws are coming over on Friday morning for the weekend (DOUBLEFUCK)

I can't play vindictus on my laptop, due to it having a busted graphics card (overheats in like 2.5seconds) so I'm going to get most of the primary coding changes done tomorrow while I'm stuck in the hospital waiting on her to get off work (weird that she works in the hospital we're going to ain't it :P ) And if things are working well enough then I may put up a "pre-release" tomorrow night

So...yeah, wish me luck on getting that done. or at least as much as possible.

DetectedSinBotv2.4 Public Version!

Similar Threads