❗ Regularly updated community macro thread [X7 Mouse]

Posts 1,036–1,050 of 1,535 · Page 70 of 103
Quote Originally Posted by omatko View Post
LOL thx for delete my post
I reported it because you put a suspicious link
Yellow,
Do you think you can make an m16a4 full auto macro? (In single shot mode, to be better than the burst mode I guess)..?
Quote Originally Posted by ruanvdk View Post
Yellow,
Do you think you can make an m16a4 full auto macro? (In single shot mode, to be better than the burst mode I guess)..?
single shot = higher recoil, higher wobble. not practical

I have burst (fullauto) but if you want it now you need to PM me and we'll work something out
Quote Originally Posted by Yellow 13 View Post
Rundown of available Bloody series mouse




Gen1

V series - 3/5/7/8 - Pixart 3350DK, 3200DPi max, 1600 native, 200DPi native +/- steps, report rate 1000Hz max. Minor sensor prediction, minimal acceleration(negative-positive).

R series - carbon copy of the V series but with wireless+internal battery. Report rate is limited to 500Hz. Wireless exclusive.

V/R series: recommend CLOTH mousepad like SS QCK, Artisan Hayate.
*don't buy the QCK series with graphics on them (team editions) the 3350DK doesn't track well on multicolor surfaces
**recommend unicolor mousepad, preferably BLACK

Uses Huano (10M cycle) switches, loud click. Slight actuation force needed, click reset is crisp and noticeable.





Gen2


TL8 (wired) / WL5 (wired/wireless) / ZL5 (sniper) - ADNS 9800, 8200DPi, 200DPi native +/- steps, report rate 1000Hz max (WL5 on wireless mode, limited to 500Hz).

WL5 also has internal battery for wireless feature.

ADNS 9800: recommend solid plastic / surface mousepad: Corsair MM400 (plastic), Artisan Shiden (hybrid cloth+glass coat), Artisan Shiden KAI (shiden with faster glide/less friction), Steelseries HD. Maybe the Razer Manticor, but idk.

*WL5 uses external USB dongle.
**sensor is almost similar to the 9500 used in LG G9X
***Accel / jitter issue on cloth mousepad, not recommended.



Wireless RT5: ADNS 3050, 4000DPi max, 200DPi native +/- steps, report rate, max 500Hz. Low max tracking speed, prediction. Overall not recommended.

Tracks well on cloth mousepad like the 3350DK



Uses Omron D2FC-F-7N (20M cycle) switches, silent click. Less travel and less pressure needed to click compared to Huano, but click reset is not as noticeable.




-> All Gen2 mouse are equipped with Metal Feet/Armor boot
-> Suffixed with "A" at the end = Core3/4 activated (free)
-> Suffixed with "M" at the end = Metal feet installed (Gen1 only)
-> Suffixed with "AM" at the end = metal feet+core3/4 activated (Gen1 only)





I know none of these sensor is perfect (3350DK, 9800, 3050), but I think it's good enough for my BF4 experience.



What I'd pay for, is a Bloody mouse with the ADNS 3310 optical sensor (No accel, no prediction, adjustable LOD, 5000DPi), some mouse uses it like the SS Rival or the Mionix Avior/Naos 7000, or the (logitech exclusive ;_ PMW3366 (12K DPi, no accel, no prediction) on the G502. (seriously would pay up to $70 for Bloody mouse with either sensor)








Macro for M240B

The attachment that can be used:
Sights: RDS, Iron or IRNV
Underbarrel: Any. But folding/angled grip has separate macro.
Barrel: Any except muzzle break.
It does: Norecoil and rapidfire
Special notes: It is better if you have a stable FPS!
FOV: 90
Sensitivity: 0.020000
Lean sens: 0.500000

Can be used in Headshot M-Macro mode by conversion
Can be used in Older X7 Oscar with conversion (READ 1st PAGE)



Support the making of macros by subscribing and viewing demo videos of my macro here -> Youtube!



DISABLE THIS SETTING IN THE VIDEO OPTION ->



File type

Iron = use with Iron sight or IRNV scope

RDS = use with 1x RDS or 1x HOLO

If macro does not have "HB" = can use standard barrel, flash hider, suppressor or compensator

If macro have "HB" = use heavy barrel

If macro does not have "AFG" = can use any grip except folding / angled, cannot use if bipod is deployed

If macro have "AFG" = use with folding / angled grip (less visual wobble)

If macro have "RR" = fires at REDUCED RPM of 600, more accurate

If macro does not have "RR" = fires at about 645-648 RPM (faster, less accurate)

If you do not aim, but press macro button, weapon will fire at max RPM (650RPM)



This is .AMC file, which can be used in older X7 Mouses (OSCAR), you need to simply look at the first page of the thread to convert this encrypted .AMC to be usable in older OSCAR editor.


New revision file type. Reduced file size and syntax complexity. The macro can be assigned to any button you like!

Pressing the macro button while aiming will have no recoil effect, but if you do not aim, the macro will not compensate for recoil. This reduced unwanted mouse pulling down while not aiming!



https://www.virustotal.com/en/file/0...is/1397834427/

http://virusscan.jotti.org/en/scanre...652fd29185ad18


<!-- BEGIN TEMPLATE: dbtech_usertag_mention -->
@<a href="http://www.mpgh.net/forum/member.php?u=1533233" target="_blank">Mayion</a>
<!-- END TEMPLATE: dbtech_usertag_mention --> or <!-- BEGIN TEMPLATE: dbtech_usertag_mention -->
@<a href="http://www.mpgh.net/forum/member.php?u=674641" target="_blank">bullpop</a>
<!-- END TEMPLATE: dbtech_usertag_mention -->
Welcome

I'm using your macros for a long time. Now for the 240B and unfortunately this macro causes the mouse moves from left to right. Please take a look at the video link. Regards




Mouse R8
Settings such as fill. Is that supposed to be?
Quote Originally Posted by omatko View Post
Welcome

I'm using your macros for a long time. Now for the 240B and unfortunately this macro causes the mouse moves from left to right. Please take a look at the video link. Regards




Mouse R8
Settings such as fill. Is that supposed to be?
check your PM
Got Titanfall. If anyone is interested, check the TF MPGH section in a week or so.
Quote Originally Posted by Yellow 13 View Post
Got Titanfall. If anyone is interested, check the TF MPGH section in a week or so.
AWSOME!!! you went ahead huh... lol

P.S.: +REP btw
I just got a v7 bloody and wanna ask about the settings. Is there a "best" settings for the mouse?
I use x and y cpi at 2000 and report rate at 1000Hz.
I havent quit got it why there is up to 5 lines in the cpi settings and if i should mark for x or y, which i haven't.
Btw, i adjusted the macro i found here to make my gun best possibly for the settings i use.
Quote Originally Posted by GTX680sli View Post
I just got a v7 bloody and wanna ask about the settings. Is there a "best" settings for the mouse?
I use x and y cpi at 2000 and report rate at 1000Hz.
I havent quit got it why there is up to 5 lines in the cpi settings and if i should mark for x or y, which i haven't.
Btw, i adjusted the macro i found here to make my gun best possibly for the settings i use.
idk, that it is good answear, x and y doesnt have metters ( use any DPI u want ) + 1000Hz
in battlefield 4 settings like in yellow on YT
Quote Originally Posted by GTX680sli View Post
I just got a v7 bloody and wanna ask about the settings. Is there a "best" settings for the mouse?
I use x and y cpi at 2000 and report rate at 1000Hz.
I havent quit got it why there is up to 5 lines in the cpi settings and if i should mark for x or y, which i haven't.
Btw, i adjusted the macro i found here to make my gun best possibly for the settings i use.
Beside the "gear shift" icon in Sensitivity tab (looks something like this) there is the setting for DPi steps. You can have 1-5 steps, with each step difference 100DPi. If I have 3 step, I can use 800-1600-3200 as setting (example)


To change DPi, click "1" button 2x (like double click) and when scroll wheel flash, move it down or up. Every scroll wheel "click" = change of DPi in 1 step (^ up = DPi UP | V down = DPi DOWN)


For V7, sensor is PMW3305 OPTICAL w/ custom lens. Recommend keeping 1600DPi and 1000Hz for native (best) sensor performance (if not mistake, 1600 or higher have less precision).


Also, if you find the mouse too slow, try open mouse and remove the "weight" inside the mouse chassis. It will make mouse lighter and easier to swipe.
Thanks, now the gearshift make sence,
So if you are using 1600 dpi when making macro and i use 2000 dpi then i have to adjust the macro or the dpi?
In bf4 i'v been using 2000dpi and it have been fine, but if you telling me 1600dpi is more acurate?
Quote Originally Posted by GTX680sli View Post
Thanks, now the gearshift make sence,
So if you are using 1600 dpi when making macro and i use 2000 dpi then i have to adjust the macro or the dpi?
In bf4 i'v been using 2000dpi and it have been fine, but if you telling me 1600dpi is more acurate?
DPi does not affect macro, macros run from a separate CPU "ultracore" on the mouse's PCB

1600= native sensor DPi, kind of like the "stock frequency" of CPU
If anyone wants to see the metal feet upgrade, check this gallery -> http: // www. abload .de /gallery.php?key=qvueh6ij
Thanks Yellow

1 question. I use C-type MG4 and adjusted x-y so the whole mag, 200 shots, make a pretty round spot, not very big cirkel.
Then next day it goes up and to right and i have done no change.
Any idea why this happend? V7 bloody and bloody5
Posts 1,036–1,050 of 1,535 · Page 70 of 103
This thread is closed for replies.

Similar Threads

Talk with us