Universal Aimbot 2.6 - VAC Proof Forever Color Aimbot

[thumper235]

I got this to work. Granted, its not some super uber-pro-private cheating aimbot, but it is very usable once you tweak it. I am very thankful OP created this. THANK YOU. (already hit the button). I played for about 2 or 3 hours in the wee hours of yesterday morning and it turned a noob FPS player into a competent-ish one. It made the game fun for me and thats all i care about. I suck, I just want to be able to keep up with my team mates and not throw a match. I usually just run medic because thats the only way I can contribute. Heavy works well with this hack.

As for being banned, I just checked and it seems everything is A-ok. Usually in my experience when you use a hack it takes steam a few hours (up to 24hrs-ish) to catch up with you and ban. So far, im good. Anyways, Thank OP! I wish there was something more I could do for your hard work.

[eFlourick]

Gotta try this, will post back

[aoihoshi55]

Detected or undetected?

[Redfiend]

Detected or undetected?

It cannot be detected, it doesn't alter the game or fuck with Valve's shit in any way. It would be like banning you from TF2 because you were running FRAPS or some other screen recording software.

Anyway, I've just been using this, and as it has been said before, a few tweaks and it works wonders. Red being colored green and blue colored purple... very handy. I was annoyed that its hard to hit Pyros due to the gastank going green and being mistaken for the head, and some miscs throw off the aimbot, including the christmas hat. The easiest classes to hit with this would be Sniper spy and scout in that order, the hardest would be Pyro demo and heavy, pyro because of the gas tank, demo due to a slight hunch in his posture, and heavy because the crosshair will put you above his head.

I've yet to experiment some more but I think if I can nudge its offset down a bit that would fix 99% of my problems.

[Evasi0nX]

um... I think this might be detected, maybe VAC got an update because i linked my friend this hack and he used it for 1 match and then deleted it and the next day he was VAC banned from tf2. Im not totally sure though because i have been using it for a week now and i still dont have a ban. He might have used something else and hes not telling me. I just find it very odd that he was banned in 1 day, thats what makes me think he used something else and hes not telling me!

[elrtricpikachu]

This this work one Windows Xp or no?

[**Awzm**]

If I get banned on TF2, will I then get banned on CS:GO too?

And: I know it says that it is undetectable but what @Evasi0nX was saaying, might that be true?

Thanks

[Crosmanairsoft]

If you get VAC banned, then yes. It bans you on all games and server that are VAC secured.

[megamanxwasdashiz]

Neat concept but it doesn't really work. If I turn on blue all it wants to do is aim at the sky box and none of the settings really seem to do anything.

[Kingofultima]

Just a little note: I didn't have much time to revise eveything I wrote in this post but hopefully you will understand what I am trying to tell you peeps out there and ignore my mistakes.

So far I have been using this hack for a month now and so far no VAC detections, and also just so you guys would know this is how you get the aimbot working fully
and I found the hack to be great in general. For the single Color Aimbot you want it on only RED and BLUE, do NOT turn on Motion Aimbot, do not enable the triggerbot, and in the settings check Throttle sensitivity through FPS, Uncentered mouse compensation, Compensate for no color at adjusted location, Don't move mouse on duplicate frames. And for the aimbot sensitivity choose 200 instead of 100, and if your are having problems such as it 'Aims' too high set the amount to shift down and the amount to shift right all to 0. And for the Settings 2 tab you want to disable Target Darker Colors and Autofire only if over target, one thing I recommend changing is the Field of View, on default it is normally set to 100 but I would set it a bit lower to about 70 or 75.

Now here is for the people that ignored the Problems with aimbot button.

1. You will need colored skin CT models or colored T models which a material wallhack has, the models can be any color.

2. .NET framework 4.0 is required. You should have it already through windows update.

Solution to problems:

The aimbot is targeting corpses
Type cl_ragdoll_physics_enable 0 in console
I don't know how to install the material wallhack
You are a noob
The aimbot is shaking too much
Lower the aimbot sensitivity and disable any CSS mouse acceleration
Type cl_showfps 2 in console and try to increase FPS over 60
Try using the default aimbot settings instead of playing with the numbers
Disable V-SYNC
The Aimbot does nothing at all
Make sure raw mouse input in css is disabled
You need a colored player model to target
DISABLE ALL ANTI-ALIASING!
Run CSS in windowed mode
Run CSS in windowed mode
Run CSS in windowed mode
Try turning DWM off/on in the settings tab
The aimbot keeps aiming upward
Your crosshair is the same color as what you are trying to target,
why don't you set the crosshair to green? by typing cl_crosshaircolor 0.
The aimbot aims too slowly
Increase the aimbot sensitivity
What settings should I use with the default aimbot settings
Windows mouse sensitivity should be on the 6th notch,
windows enhanced precision disabled, the CSS mouse sensitivity
your using should be entered in the aimbot,
and CSS mouse acceleration disabled.

What settings you should look out for:

Disable vertical sync
not doing so will cause the aimbot to aim very badly.
Disable anti-aliasing
Aimbot won't work with it enabled.
Disable RAW mouse imput
Aimbot won't work with it enabled.
Disable motion blur
Causes smearing which could throw the aimbot off.
Disable HDR
Can cause more smearing with transparent textures.
Very transparent wallhack
Very transparent wallhacks can cause severe color
smearing in certain areas of maps.
Anything less than 65 FPS (or monitor HZ)
will cause the aimbot to wobble and shake regardless of sensitivity,
type cl_showfps 2 and lower settings until FPS is near
or above 60 at all times.
No css mouse acceleration
CSS mouse acceleration isn't for noobs, but setting this to a small
amount could help track strafing enemies.
Windows enhanced pointer precision
Not known if this effects CSS, prolly should keep it enabled to help
track strafing enemies if it does do anything.
Mouse filter
Probably should be disabled since it will average mouse movements
making tracking strafing enemies more difficult
Windowed mode
Always try and go fullscreen mode - You'll get more FPS and not have a
window border. Try enabling / disabling DWM in the settings tab to see if
fullscreen will work.
UA aimbot sensitivity
You will definitely need to adjust this and find the correct sensitivity.
The correct sensitivity also changes for different screen resolutions.
Later vers I plan on having the aimbot find the correct setting.
Keep raising the sensitivity if the aimbot is failing to track
far enemies strafing and lower if the aimbot is shaking too much.
Amount to shift down/Amount to shift right
These can be set to negative values. The amount to shift down
should be set more when sniping since enemies are enlarged.
Multi-core rendering
Enable this, it will increase your FPS if you got a multi-core cpu. TF2 users might get BSOD with this setting enabled. Works fine with CSS.

After doing all of this the aimbot worked perfectly, I hope this has helped you.

[Kingofultima]

lol VAC proof forever, you do realise that vac can add a sig / whatever for this?

That's not how VAC works and it will never be that way in any matter, See this is really how VAC works, Any third-party modification to a game designed to give one player an advantage over another is classified as a cheat or hack and will trigger a VAC ban. This includes modifications to a game's core executable files and dynamic link libraries. Yet Universal Aimbot 2.6 does not violate any of these Anti-Cheat laws since it only takes Screen-shots and moves the mouse and the ESP is in the custom folder which mean it will NOT trigger a VAC ban of any sort.

[Zopa441]

I downloaded 3 hacks. 2 wall hacks and 1 achievement unlocker from this website and got banned.
Please tell me if this one did get you banned

[Gray]

If I get banned on TF2, will I then get banned on CS:GO too?

And: I know it says that it is undetectable but what @Evasi0nX was saaying, might that be true?

Thanks

No, you don't.
It's engine based.

So for e.g. If you get banned on CSS, you get banned on all VAC secured servers using that source engine.
CSGO and TF2 are running two different engines.

Don't tell me I'm wrong, I fucking know I'm not.

[megamanxwasdashiz]

I did these steps and it does in fact make the aim bot actually work pretty well. It's still not as good as something like LMAObox of course, but then against lmaobox can get you banned in under an hour

Only downside is the game looks frikkin ugly when everyone is a solid purple/green (I used these ones they seem to work the best)

[fishmeister]

its worked for me 3 days now im vac banned !