MPGHThe Dark Arts
RegisterLog in

BF4 Config - Remove Motion Blur/Supression Blur

Posts 46–60 of 66 · Page 4 of 5
Quote Originally Posted by Yellow 13 View Post
actually, don't put that command in

it's invalid
Quote Originally Posted by hertzogg View Post
->Yellow 13

How do I calc this?


Thread.MaxProcessorCount (amount of physical + virtual code you have. in numbers)



my system:
win7 64
i7-4770 at 3.50 GHz
32 GB ram
2-2GB GTX 760 in SLI
You should quote him if you want him to get the notification, remember that next time.
#46 ·
is me user
Code:
GameTime.MaxVariableFps 120 
GstAudio.AudioQuality 1 
GstAudio.StereoMode 1 
GstAudio.YourSoundSystem 3 
GstRender.Thread.MaxProcessorCount 2 
PerfOverlay.Enable 1 
PerfOverlay.DrawFps 1 
PerfOverlay.DrawGraph 0 
PostProcess.DynamicAOEnable 0 
Render.DrawScreenInfo 0 
RenderDevice.Dx10Dot1Enable 1 
RenderDevice.Dx10Dot1RuntimeEnable 1 
RenderDevice.Dx10Enable 1 
RenderDevice.ForceRenderAheadLimit 0 
RenderDevice.TripleBufferingEnable 0 
RenderDevice.RenderAheadLimit 0 
RenderDevice.VsyncEnable 0 
Screenshot.Format jpg 
WorldRender.MotionBlurMax 0 
WorldRender.MotionBlurEnable 0 
WorldRender.MotionBlurMaxSampleCount 0 
WorldRender.MotionBlurRadialBlurMax 0 
WorldRender.MotionBlurQuality 0 
WorldRender.PlanarReflectionEnable 0 
WorldRender.SpotLightShadowMapResolution 256 
WorldRender.SpotLightShadowMapEnable 0 
WorldRender.LightTilecsPathEnable 0 
WorldRender.DxDeferredCsPathEnable 0 
WorldRender.TransparencyShadowmapsEnable 0
#47 · edited ·
my cfg. config

Code:
GameTime.MaxVariableFps 119.98
PerfOverlay.DrawFps 1
RenderDevice.Dx11Enable 1
RenderDevice.Dx11Dot1Enable 0
RenderDevice.Dx11Dot1RuntimeEnable 0
RenderDevice.ForceRenderAheadLimit 0
RenderDevice.TripleBufferingEnable 0
RenderDevice.VsyncEnable 0
PostProcess.DynamicAOEnable 0
WorldRender.MotionBlurEnable 0
WorldRender.MotionBlurForceOn 0
WorldRender.MotionBlurFixedShutterTime 0
WorldRender.MotionBlurMax 0
WorldRender.MotionBlurQuality 0
WorldRender.MotionBlurMaxSampleCount 0
WorldRender.SpotLightShadowmapEnable 0
WorldRender.SpotLightShadowmapResolution 256
WorldRender.TransparencyShadowmapsEnable 0
WorldRender.LightTileCsPathEnable 0
#48 · edited ·
Nice thread helped alot!
#49 ·
RenderDevice.ForceRenderAheadLimit 0
This is the wrong command,doesn't work in BF4

correct it:

RenderDevice.RenderAheadLimit 0
#51 · edited ·
Quote Originally Posted by plisapolisa View Post
RenderDevice.ForceRenderAheadLimit 0
This is the wrong command,doesn't work in BF4

correct it:

RenderDevice.RenderAheadLimit 0
Proof of your statement?
#52 ·
Quote Originally Posted by plisapolisa View Post
RenderDevice.ForceRenderAheadLimit 0
This is the wrong command,doesn't work in BF4

correct it:

RenderDevice.RenderAheadLimit 0
As far as I can tell the command is doing it's job, even if the line isn't correct it isn't an essential part of the config and the suppression/motion blur should still be removed. Perhaps the line was changed in an update recently but as of now the config still works.
#53 ·
Quote Originally Posted by Scotia View Post


As far as I can tell the command is doing it's job, even if the line isn't correct it isn't an essential part of the config and the suppression/motion blur should still be removed. Perhaps the line was changed in an update recently but as of now the config still works.
Your command made my BF4 run 35fps lower lol
#54 ·
Quote Originally Posted by Yellow 13 View Post
Your command made my BF4 run 35fps lower lol
Which command, changing the line to

RenderDevice.RenderAheadLimit 0

or keeping it as

RenderDevice.ForceRenderAheadLimit 0?
#55 ·
Quote Originally Posted by Scotia View Post


Which command, changing the line to

RenderDevice.RenderAheadLimit 0

or keeping it as

RenderDevice.ForceRenderAheadLimit 0?
RenderDevice.RenderAheadLimit 1

1 is the preferred value if you have single GPU
#56 ·
Quote Originally Posted by Yellow 13 View Post
RenderDevice.RenderAheadLimit 1

1 is the preferred value if you have single GPU
I presume that you're running an SLI/Crossfire setup then?
#57 ·
Quote Originally Posted by Scotia View Post


I presume that you're running an SLI/Crossfire setup then?
I use 1 GPU
#58 ·
Quote Originally Posted by Yellow 13 View Post
I use 1 GPU
Strange, my FPS isn't affected in the slightest by the config, what GPU do you use?
#59 ·
Quote Originally Posted by Scotia View Post


Strange, my FPS isn't affected in the slightest by the config, what GPU do you use?
It won't affect your FPS until you're suppressed, and now there's no way to tell if you're suppressed or not.
#60 ·
Posts 46–60 of 66 · Page 4 of 5
This thread is closed for replies.

Similar Threads

Combat Arms Mod Request🙁 [Request] How to remove blur from scopes.ScyntrusScyntrus 2 Combat Arms Helphow to remove the blur of sightsFEfelippe9 6 Battlefield 3 (BF3) Hacks & Cheats[Request] Remove blur effect when you get shotJOjohnnyblack 21 Combat Arms Mod Helphow to remove the blur of sightsFEfelippe9 7 Dragon Nest Hacks & Cheats➡️ Remove FOV/Zoom Blur in Dragon NEstDracconusDracconus 13

Tags for this Thread

None

Talk with us